AlarmSystemStore.com BBB Business Review
Home / Products / DSC HS3251CP01 PowerSeries Neo Kit

DSC HS3251CP01 PowerSeries Neo Kit

$219.95

Quick Overview

The HS3251 kit provides you with everything you need to get started on a hardwired DSC NEO setup. You'll get an HS2032 NEO, as well as a programmable keypad, the HS2LCDENGN. If you would like a wireless NEO setup, the HS32119 kit is where you should start.

In Stock
Add to Wishlist

DSC HS3251CP01 PowerSeries Neo Kit

What you get:

Alarm cabinet
HS2032 control board
16.5V 40VA Transformer
12V 7A Backup Battery
HS2LCDENG Keypad
SD15W 15 Watt Indoor Dual Tone Siren
Purchase Optional Pre-programming for your system HERE

The DSC PowerSeries NEO is the newest in DSC's line up. What you'll get with the HS3251CP01 kit are the DSC NEO HS2032 control board and PC5003C cabinet. This also comes with the PTC1640 transformer and a 12 volt 7 amp backup battery. You'll also get the HS2LCDENG Full message keypad, which will allow easier programming and the ability to label zones. 

This is a hardwired/wireless hybrid system. It comes with 8 hardwired zones on the mainboard, and you can add more hardwired zones by installing the HSM2108 8-Hardwired Zone Expander Module. As we just mentioned, the DSC NEO can use wireless devices as well. The DSC NEO wireless devices can be used if you have a wired keypad with a built-in transceiver such as the HS2LCDRF9ENG or by using the HSM2HOST9 Transceiver Module. The wireless range that the NEO has is an impressive half-mile, and the device's lithium batteries will last a good 6-8 years before having to be replaced because of the energy-saving features that the NEO has to offer. You'll get a total of 32 zones with the HS2032 panel in any combination of hardwired and wireless devices.

The HS2032 board has 2 PGM outputs, which can be used for additional attached devices such as smoke detectors. The PGMs can also be used as triggers to set off additional notifiers like add-on chimes when certain system events occur. You can expand up to 38 PGMs using modules such as the HSM2204 and the HSM2208 PGM expander cards. The HSM2204 is a high-current output and power supply. It adds 4 PGM outputs. The HSM2208 is a standard 8 PGM output expansion board. Those with the 2 onboard PGM outputs bring the PGM output total to 38.

 Because of the keypad you get with this kit, the HS2LCDENG; you'll have a much better time programming your new NEO panel. This keypad will read out all programming information and has a 32 character display. DSC has made programming a little easier with the NEO as they've combined a lot of the programming sections that they previously separated in the PC1616, PC1832, and PC1864 panels. All sections and toggle options are labeled, so you're not guessing where you're at in programming. You also can scroll through sections using the arrow keys on the keypad.

Another feature that the DSC NEO boasts is a 500 event log. If you need to know what alarms have happened in the recent past, then you'll be able to pull them up from the event log as long as you have one of the full message keypads. You'll be able to pinpoint which sensor was activated and when. For instance, if you go on vacation and have an event when you're gone, then you can see it in the log.

The HS2032 can store up to 72 user codes. These codes are used for daily use to arm and disarm the system. This is more than what most people need for a home installation as far as user codes go, but these systems can also be used in a small business setting for companies with a plethora of employees. You can also add a proximity capable keypad such as the HS2LCDRFP9ENG so you can use the NEO proximity tags. This makes arming and disarming simple as users have to swipe their tags across the keypad to arm or disarm the system. You can add 71 prox tags to the system.

This version of the HS2032NK is CP01 compliant and has all the fail-safes to help protect against false alarms. You will not be able to pick values for some programming sections below a certain value, such as the entry/exit delays.

DSC NEO HS2016, HS2032, HS2064, HS2128 Installation Manual
DSC NEO HS2016, HS2032, HS2064, HS2128 Reference Manual
DSC NEO HS2016, HS2032, HS2064, HS2128 User Manual
DSC NEO HS2016, HS2032, HS2064, HS2128 Specifications Sheet

 

 

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Related Products

Alarm System Programming Service
  • {"id":10588585989,"title":"Alarm System Programming Service","handle":"alarm-system-programming-service","description":"\u003ch2\u003eAlarm System Programming Service\u003c\/h2\u003e\nAll of the systems we sell can be programmed by you. We even provide simplified quick start programming guides upon request for most systems to make it easier. For those without the time or inclination to learn how to program them, we offer this optional pre-programming service. \u003cbr\u003e\u003cbr\u003eYou can have our technicians pre-program and setup your system prior to it shipping. Once ordered, \u003cspan data-mce-fragment=\"1\"\u003eyou will receive an emailed form to supply the required information.\u003c\/span\u003e This will delay shipping 2-3 days after we receive your pre-program form.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOur pre-programming service includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSetting up and enrolling sensors zones as desired (large systems beyond 16 zones may incur an additional charge)\u003c\/li\u003e\n\u003cli\u003eEnroll and program zone expanders, wireless transceivers, and power supply modules as needed\u003c\/li\u003e\n\u003cli\u003eCustom labeling alpha keypads\u003c\/li\u003e\n\u003cli\u003eSetting entry and exit delays\u003c\/li\u003e\n\u003cli\u003eSetting up user codes and authority levels\u003c\/li\u003e\n\u003cli\u003eTesting and verifying your system before shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVery large systems or those with custom \/ out-of-the-norm programming requirements such as those using multiple partitions may incur an additional fee. If you would like to verify if such a condition exists with your planned system, please feel to contact us. 95% of systems we program are A typical and do not incur additional fees to complete, so it is NOT common.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis is a great way to get your system up and going right after you receive it. Just run the wire from the panel out to all of the devices, sirens, and keypads, power up the system, and rest easy that you are now protected.\u003cbr\u003e\u003cbr\u003eThis is good for those who aren't very technically inclined or for those that need it to function now and learn about the workings of their system later.\u003c\/p\u003e","published_at":"2017-10-26T13:47:36-04:00","created_at":"2017-10-26T12:49:59-04:00","vendor":"AlarmSystemStore.com","type":"Programming","tags":["DSC Alarm System Kits \u0026 Packages","DSC Alarm Systems","DSC Power 1616 Alarm Systems","DSC Power 1832 Alarm Systems","DSC Power 1864 Alarm Systems","DSC Power Series 1616","DSC Power Series 1832","DSC Power Series 1864","DSC PowerSeries NEO Kits \u0026 Packages","Els PW 20590","Hardwired Sensors","pre","pre-program","pre-programming","preprogram","preprogramming","pro"],"price":18995,"price_min":18995,"price_max":18995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":53261795333,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PROGRAMMING","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm System Programming Service","public_title":null,"options":["Default Title"],"price":18995,"weight":0,"compare_at_price":null,"inventory_quantity":-69,"inventory_management":null,"inventory_policy":"deny","barcode":"PROGRAMMING","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarm-system-programming-service-562283.jpg?v=1595525975"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarm-system-programming-service-562283.jpg?v=1595525975","options":["Title"],"media":[{"alt":"Alarm System Programming Service - AlarmSystemStore.com","id":7363078226022,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarm-system-programming-service-562283.jpg?v=1595525975"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarm-system-programming-service-562283.jpg?v=1595525975","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eAlarm System Programming Service\u003c\/h2\u003e\nAll of the systems we sell can be programmed by you. We even provide simplified quick start programming guides upon request for most systems to make it easier. For those without the time or inclination to learn how to program them, we offer this optional pre-programming service. \u003cbr\u003e\u003cbr\u003eYou can have our technicians pre-program and setup your system prior to it shipping. Once ordered, \u003cspan data-mce-fragment=\"1\"\u003eyou will receive an emailed form to supply the required information.\u003c\/span\u003e This will delay shipping 2-3 days after we receive your pre-program form.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOur pre-programming service includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSetting up and enrolling sensors zones as desired (large systems beyond 16 zones may incur an additional charge)\u003c\/li\u003e\n\u003cli\u003eEnroll and program zone expanders, wireless transceivers, and power supply modules as needed\u003c\/li\u003e\n\u003cli\u003eCustom labeling alpha keypads\u003c\/li\u003e\n\u003cli\u003eSetting entry and exit delays\u003c\/li\u003e\n\u003cli\u003eSetting up user codes and authority levels\u003c\/li\u003e\n\u003cli\u003eTesting and verifying your system before shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVery large systems or those with custom \/ out-of-the-norm programming requirements such as those using multiple partitions may incur an additional fee. If you would like to verify if such a condition exists with your planned system, please feel to contact us. 95% of systems we program are A typical and do not incur additional fees to complete, so it is NOT common.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis is a great way to get your system up and going right after you receive it. Just run the wire from the panel out to all of the devices, sirens, and keypads, power up the system, and rest easy that you are now protected.\u003cbr\u003e\u003cbr\u003eThis is good for those who aren't very technically inclined or for those that need it to function now and learn about the workings of their system later.\u003c\/p\u003e"}
Ademco Honeywell Vista 20P Kits
Alarm System Programming Service
$189.95
Alarm System Programming Service All of the systems we sell can be programmed by you. We even provide simplified quick start programming guides upon request for most systems to make it easier. For those without the time or inclination to learn how to program them, we offer this optional pre-programming service. You can have our technicians pre-program and setup your system prior to it shipping. Once ordered, you will receive an emailed form to supply the required information. This will delay shipping 2-3 days after we receive your pre-program form.Our pre-programming service includes: Setting up and enrolling sensors zones as desired (large systems beyond 16 zones may incur an additional charge) Enroll and program zone expanders, wireless transceivers, and power supply modules as needed Custom labeling alpha keypads Setting entry and exit delays Setting up user codes and authority levels Testing and verifying your system before shipping Very large systems or those with...
Alarm System Programming Service All of the systems we sell can be programmed by you. We even provide simplified quick...
  • {"id":10588585989,"title":"Alarm System Programming Service","handle":"alarm-system-programming-service","description":"\u003ch2\u003eAlarm System Programming Service\u003c\/h2\u003e\nAll of the systems we sell can be programmed by you. We even provide simplified quick start programming guides upon request for most systems to make it easier. For those without the time or inclination to learn how to program them, we offer this optional pre-programming service. \u003cbr\u003e\u003cbr\u003eYou can have our technicians pre-program and setup your system prior to it shipping. Once ordered, \u003cspan data-mce-fragment=\"1\"\u003eyou will receive an emailed form to supply the required information.\u003c\/span\u003e This will delay shipping 2-3 days after we receive your pre-program form.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOur pre-programming service includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSetting up and enrolling sensors zones as desired (large systems beyond 16 zones may incur an additional charge)\u003c\/li\u003e\n\u003cli\u003eEnroll and program zone expanders, wireless transceivers, and power supply modules as needed\u003c\/li\u003e\n\u003cli\u003eCustom labeling alpha keypads\u003c\/li\u003e\n\u003cli\u003eSetting entry and exit delays\u003c\/li\u003e\n\u003cli\u003eSetting up user codes and authority levels\u003c\/li\u003e\n\u003cli\u003eTesting and verifying your system before shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVery large systems or those with custom \/ out-of-the-norm programming requirements such as those using multiple partitions may incur an additional fee. If you would like to verify if such a condition exists with your planned system, please feel to contact us. 95% of systems we program are A typical and do not incur additional fees to complete, so it is NOT common.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis is a great way to get your system up and going right after you receive it. Just run the wire from the panel out to all of the devices, sirens, and keypads, power up the system, and rest easy that you are now protected.\u003cbr\u003e\u003cbr\u003eThis is good for those who aren't very technically inclined or for those that need it to function now and learn about the workings of their system later.\u003c\/p\u003e","published_at":"2017-10-26T13:47:36-04:00","created_at":"2017-10-26T12:49:59-04:00","vendor":"AlarmSystemStore.com","type":"Programming","tags":["DSC Alarm System Kits \u0026 Packages","DSC Alarm Systems","DSC Power 1616 Alarm Systems","DSC Power 1832 Alarm Systems","DSC Power 1864 Alarm Systems","DSC Power Series 1616","DSC Power Series 1832","DSC Power Series 1864","DSC PowerSeries NEO Kits \u0026 Packages","Els PW 20590","Hardwired Sensors","pre","pre-program","pre-programming","preprogram","preprogramming","pro"],"price":18995,"price_min":18995,"price_max":18995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":53261795333,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PROGRAMMING","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm System Programming Service","public_title":null,"options":["Default Title"],"price":18995,"weight":0,"compare_at_price":null,"inventory_quantity":-69,"inventory_management":null,"inventory_policy":"deny","barcode":"PROGRAMMING","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarm-system-programming-service-562283.jpg?v=1595525975"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarm-system-programming-service-562283.jpg?v=1595525975","options":["Title"],"media":[{"alt":"Alarm System Programming Service - AlarmSystemStore.com","id":7363078226022,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarm-system-programming-service-562283.jpg?v=1595525975"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarm-system-programming-service-562283.jpg?v=1595525975","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eAlarm System Programming Service\u003c\/h2\u003e\nAll of the systems we sell can be programmed by you. We even provide simplified quick start programming guides upon request for most systems to make it easier. For those without the time or inclination to learn how to program them, we offer this optional pre-programming service. \u003cbr\u003e\u003cbr\u003eYou can have our technicians pre-program and setup your system prior to it shipping. Once ordered, \u003cspan data-mce-fragment=\"1\"\u003eyou will receive an emailed form to supply the required information.\u003c\/span\u003e This will delay shipping 2-3 days after we receive your pre-program form.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOur pre-programming service includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSetting up and enrolling sensors zones as desired (large systems beyond 16 zones may incur an additional charge)\u003c\/li\u003e\n\u003cli\u003eEnroll and program zone expanders, wireless transceivers, and power supply modules as needed\u003c\/li\u003e\n\u003cli\u003eCustom labeling alpha keypads\u003c\/li\u003e\n\u003cli\u003eSetting entry and exit delays\u003c\/li\u003e\n\u003cli\u003eSetting up user codes and authority levels\u003c\/li\u003e\n\u003cli\u003eTesting and verifying your system before shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVery large systems or those with custom \/ out-of-the-norm programming requirements such as those using multiple partitions may incur an additional fee. If you would like to verify if such a condition exists with your planned system, please feel to contact us. 95% of systems we program are A typical and do not incur additional fees to complete, so it is NOT common.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis is a great way to get your system up and going right after you receive it. Just run the wire from the panel out to all of the devices, sirens, and keypads, power up the system, and rest easy that you are now protected.\u003cbr\u003e\u003cbr\u003eThis is good for those who aren't very technically inclined or for those that need it to function now and learn about the workings of their system later.\u003c\/p\u003e"}
DSC BATT-PGX901/X911 Battery For PG9911 PG9901 (PGX901/PGX911)
Alarm Backup Batteries
DSC BATT-PGX901/X911 Battery For PG9911 PG9901 (PGX901/PGX911)
Sold Out
DSC BATT-PGX901/X911Battery For PG9911 PG9901 (PGX901/PGX911) This is the battery for the DSC PowerG wireless sirens in the PG9901 / PG9911 series. Your initial wireless siren will come with one of these but if you need a replacement, this is the replacement battery. We cannot ship this outside of the USA.  NOTE: Can only be shipped UPS Ground. Specifications: Battery Size D Size Battery Chemistry: Lithium Metal Battery Nominal Voltage: 3.6V Nominal Capacity: 14500 mAh Weight: 8 oz Compatibility:  PGX901/PGX911 indoor & outdoor sirens
DSC BATT-PGX901/X911Battery For PG9911 PG9901 (PGX901/PGX911) This is the battery for the DSC PowerG wireless sirens in the PG9901 /...
DSC BATT1.3-4.8V BATTERY FOR PG9920 WIRELESS POWERG REPEATER
Alarm Backup Batteries
DSC BATT1.3-4.8V BATTERY FOR PG9920 WIRELESS POWERG REPEATER
Sold Out
DSC BATT1.3-4.8V BATTERY FOR PG9920 WIRELESS POWERG REPEATER This is the backup battery for the DSC NEO PG9920 Wireless PowerG Repeater which is used with the DSC PowerSeries NEO alarm panels. The battery provides backup power if the electricity goes down for whatever reason. The PG9920 does have its own power supply and the AC will provide a trickle charge for this battery so it stays at peak backup performance.   The BATT1.3-4.8V is a 4.8 V 1300 mAh NiMH battery that provides up to 48 hours of backup when fully charged. It takes 12 hours for this battery to reach an 80% charge. Specifications: Battery Size PowerPack Battery Chemistry: rechargeable NiMH battery Nominal Voltage: 3-4.8V - 4.8 volt Nominal Capacity: 1300 mAh Weight: 4 oz Compatibility:  PG9920 Repeater Dimensions: 1 x 1 x 2 in
DSC BATT1.3-4.8V BATTERY FOR PG9920 WIRELESS POWERG REPEATER This is the backup battery for the DSC NEO PG9920 Wireless PowerG...