Customer Service
DSC PowerSeries NEO HSM2204 High Current Output Module
Quick Overview
DSC PowerSeries NEO HSM2204 High Current Output ModuleThe HSM2204 can provide up to 1.0A of additional current to the compatible PowerSeries NEO alarm controllers, models HS2016, HS2032, HS2064 and HS2128....Available : In Stock
Add to Wishlist
DSC PowerSeries NEO HSM2204 High Current Output Module
The HSM2204 can provide up to 1.0A of additional current to the compatible PowerSeries NEO alarm controllers, models HS2016, HS2032, HS2064 and HS2128. The HSM2204 can provide up to 1.0A of additional current and add up to four high-current programmable outputs.Specifications:
Power supply Type A as per EN50131-6 StandardTemperature range: -10 C to 55 C (0 C to 49 C for UL/ULC listed systems)
Relative Humidity: 5% to 93% R.H. non condensing
Input rating: EU: 220V-240VAC, 50Hz, 200mA; NA: 120V, 60Hz, 500mA. Only one board shall be powered from a transformer
Features
Fully supervised for AC failure, low battery and AUX failure adds 4 programmable high current voltage outputs: rated at 1 Amp @ 12 VDCOutput #1 can be used as a supervised bell output
Provides up to 1 Amp @ 12 VDC
Extended Information
Related Products
-
{"id":7037340805,"title":"DSC GS15ANTQ 15 FT Quad External Antenna Extension Kit","handle":"dsc-gs15antq-15-ft-quad-external-antenna-extension","description":"\u003ch2\u003eDSC GS15ANTQ 15 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\nThe GS15ANTQ is an antenna extension that you can use with various DSC cellular communicators. This will provide you with an extra 15 feet of antenna to give you better signal. This 15 foot kit will give you 2dBi gain in your signal. The antennna is omni-directional so you won't have to worry about placing it in a certain direction for best coverage. The antenna itself measures 8.2\" and is .46\" in diameter. \u003cbr\u003e\u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. They work great if you have already mounted the main alarm control and cellular communicator and don't want to or can't move them. This particular version can only be installed and mounted on the inside of the home or business. They are not made for mounting outside.You will want to mount this far away from anything that might want to cause electrical interference and in a vertical position for optimal signal strength. This will come with all the mounting hardware you'll need including a mounting bracket and screws.\u003cbr\u003e\u003cbr\u003eThe communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.","published_at":"2016-12-13T20:04:00-05:00","created_at":"2017-01-23T07:13:40-05:00","vendor":"AlarmSystemStore.com","type":"DSC PowerSeries NEO Accessories \u0026 Expansion","tags":["DSC Communicators","DSC PowerSeries NEO","DSC PowerSeries NEO Accessories \u0026 Expansion"],"price":6900,"price_min":6900,"price_max":6900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526329285,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSCGS15ANTQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC GS15ANTQ 15 FT Quad External Antenna Extension Kit","public_title":null,"options":["Default Title"],"price":6900,"weight":2268,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":"DSCGS15ANTQ"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS15ANTQ-2.jpg?v=1496954707"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS15ANTQ-2.jpg?v=1496954707","options":["Title"],"content":"\u003ch2\u003eDSC GS15ANTQ 15 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\nThe GS15ANTQ is an antenna extension that you can use with various DSC cellular communicators. This will provide you with an extra 15 feet of antenna to give you better signal. This 15 foot kit will give you 2dBi gain in your signal. The antennna is omni-directional so you won't have to worry about placing it in a certain direction for best coverage. The antenna itself measures 8.2\" and is .46\" in diameter. \u003cbr\u003e\u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. They work great if you have already mounted the main alarm control and cellular communicator and don't want to or can't move them. This particular version can only be installed and mounted on the inside of the home or business. They are not made for mounting outside.You will want to mount this far away from anything that might want to cause electrical interference and in a vertical position for optimal signal strength. This will come with all the mounting hardware you'll need including a mounting bracket and screws.\u003cbr\u003e\u003cbr\u003eThe communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e."}
$69.00
DSC GS15ANTQ 15 FT Quad External Antenna Extension Kit The GS15ANTQ is an antenna extension that you can use with various DSC cellular communicators. This will provide you with an extra 15 feet of antenna to give you better signal. This 15 foot kit will give you 2dBi gain in your signal. The antennna is omni-directional so you won't have to worry about placing it in a certain direction for best coverage. The antenna itself measures 8.2" and is .46" in diameter. You can us this extension kit with the DSC TL2603GR, the DSC 3G2060RUSA, the DSC PowerSeries NEO TL2803GUSA, the DSC PowerSeries NEO 3G2080USA,the DSC NEO CD8080VZ, the DSC NEO CD8080IVZ, the DSC NEO 3G8080IAT and the DSC NEO 3G8080AT. They work great if you have already mounted the main alarm control and cellular communicator and don't want to or can't move them. This particular version can only be...
DSC GS15ANTQ 15 FT Quad External Antenna Extension Kit The GS15ANTQ is an antenna extension that you can use with...
-
{"id":7037340805,"title":"DSC GS15ANTQ 15 FT Quad External Antenna Extension Kit","handle":"dsc-gs15antq-15-ft-quad-external-antenna-extension","description":"\u003ch2\u003eDSC GS15ANTQ 15 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\nThe GS15ANTQ is an antenna extension that you can use with various DSC cellular communicators. This will provide you with an extra 15 feet of antenna to give you better signal. This 15 foot kit will give you 2dBi gain in your signal. The antennna is omni-directional so you won't have to worry about placing it in a certain direction for best coverage. The antenna itself measures 8.2\" and is .46\" in diameter. \u003cbr\u003e\u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. They work great if you have already mounted the main alarm control and cellular communicator and don't want to or can't move them. This particular version can only be installed and mounted on the inside of the home or business. They are not made for mounting outside.You will want to mount this far away from anything that might want to cause electrical interference and in a vertical position for optimal signal strength. This will come with all the mounting hardware you'll need including a mounting bracket and screws.\u003cbr\u003e\u003cbr\u003eThe communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.","published_at":"2016-12-13T20:04:00-05:00","created_at":"2017-01-23T07:13:40-05:00","vendor":"AlarmSystemStore.com","type":"DSC PowerSeries NEO Accessories \u0026 Expansion","tags":["DSC Communicators","DSC PowerSeries NEO","DSC PowerSeries NEO Accessories \u0026 Expansion"],"price":6900,"price_min":6900,"price_max":6900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526329285,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSCGS15ANTQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC GS15ANTQ 15 FT Quad External Antenna Extension Kit","public_title":null,"options":["Default Title"],"price":6900,"weight":2268,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":"DSCGS15ANTQ"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS15ANTQ-2.jpg?v=1496954707"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS15ANTQ-2.jpg?v=1496954707","options":["Title"],"content":"\u003ch2\u003eDSC GS15ANTQ 15 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\nThe GS15ANTQ is an antenna extension that you can use with various DSC cellular communicators. This will provide you with an extra 15 feet of antenna to give you better signal. This 15 foot kit will give you 2dBi gain in your signal. The antennna is omni-directional so you won't have to worry about placing it in a certain direction for best coverage. The antenna itself measures 8.2\" and is .46\" in diameter. \u003cbr\u003e\u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. They work great if you have already mounted the main alarm control and cellular communicator and don't want to or can't move them. This particular version can only be installed and mounted on the inside of the home or business. They are not made for mounting outside.You will want to mount this far away from anything that might want to cause electrical interference and in a vertical position for optimal signal strength. This will come with all the mounting hardware you'll need including a mounting bracket and screws.\u003cbr\u003e\u003cbr\u003eThe communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e."}
-
{"id":7037340997,"title":"DSC GS25ANTQ 25 FT Quad External Antenna Extension Kit","handle":"dsc-gs25antq-25-ft-quad-external-antenna-extension","description":"\u003ch2\u003eDSC GS25ANTQ 25 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eThe GS25ANTQ is an antenna extension that will let you extend the antenna of any DSC cellular communicators to 25 feet. Some people need extra length as the spot where they've placed the cellular communicator doesn't get good signal. This antenna extension will give you a 3dBi gain on signal. The antenna you get in the kit is omni-directional and must be mounted in the vertical position for optimum signal coverage. This antenna can be mounted outside or inside in higher elevations. The antenna portion of this kit measures 24\" long and has a 0.79\" circumfrence.\u003cbr\u003e \u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e \u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. The communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThese kits come with instructions on how to install them and also include the mounting hardware that you'll need to mount the antenna. Installing these requires running the male connector into the cellular communicator's casing and plugging it in where the stock antenna was plugged in.\u003c\/p\u003e","published_at":"2016-12-15T00:41:00-05:00","created_at":"2017-01-23T07:13:42-05:00","vendor":"AlarmSystemStore.com","type":"DSC PowerSeries NEO Accessories \u0026 Expansion","tags":["DSC Communicators","DSC PowerSeries NEO","DSC PowerSeries NEO Accessories \u0026 Expansion"],"price":10895,"price_min":10895,"price_max":10895,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526332741,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSCGS25ANTQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC GS25ANTQ 25 FT Quad External Antenna Extension Kit","public_title":null,"options":["Default Title"],"price":10895,"weight":2268,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"deny","barcode":"DSCGS25ANTQ"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS25ANTQ-2.jpg?v=1496954708"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS25ANTQ-2.jpg?v=1496954708","options":["Title"],"content":"\u003ch2\u003eDSC GS25ANTQ 25 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eThe GS25ANTQ is an antenna extension that will let you extend the antenna of any DSC cellular communicators to 25 feet. Some people need extra length as the spot where they've placed the cellular communicator doesn't get good signal. This antenna extension will give you a 3dBi gain on signal. The antenna you get in the kit is omni-directional and must be mounted in the vertical position for optimum signal coverage. This antenna can be mounted outside or inside in higher elevations. The antenna portion of this kit measures 24\" long and has a 0.79\" circumfrence.\u003cbr\u003e \u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e \u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. The communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThese kits come with instructions on how to install them and also include the mounting hardware that you'll need to mount the antenna. Installing these requires running the male connector into the cellular communicator's casing and plugging it in where the stock antenna was plugged in.\u003c\/p\u003e"}
$108.95
DSC GS25ANTQ 25 FT Quad External Antenna Extension Kit The GS25ANTQ is an antenna extension that will let you extend the antenna of any DSC cellular communicators to 25 feet. Some people need extra length as the spot where they've placed the cellular communicator doesn't get good signal. This antenna extension will give you a 3dBi gain on signal. The antenna you get in the kit is omni-directional and must be mounted in the vertical position for optimum signal coverage. This antenna can be mounted outside or inside in higher elevations. The antenna portion of this kit measures 24" long and has a 0.79" circumfrence. You can us this extension kit with the DSC TL2603GR, the DSC 3G2060RUSA, the DSC PowerSeries NEO TL2803GUSA, the DSC PowerSeries NEO 3G2080USA,the DSC NEO CD8080VZ, the DSC NEO CD8080IVZ , the DSC NEO 3G8080IAT and the DSC NEO 3G8080AT. The communicators listed above work...
DSC GS25ANTQ 25 FT Quad External Antenna Extension Kit The GS25ANTQ is an antenna extension that will let you extend...
-
{"id":7037340997,"title":"DSC GS25ANTQ 25 FT Quad External Antenna Extension Kit","handle":"dsc-gs25antq-25-ft-quad-external-antenna-extension","description":"\u003ch2\u003eDSC GS25ANTQ 25 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eThe GS25ANTQ is an antenna extension that will let you extend the antenna of any DSC cellular communicators to 25 feet. Some people need extra length as the spot where they've placed the cellular communicator doesn't get good signal. This antenna extension will give you a 3dBi gain on signal. The antenna you get in the kit is omni-directional and must be mounted in the vertical position for optimum signal coverage. This antenna can be mounted outside or inside in higher elevations. The antenna portion of this kit measures 24\" long and has a 0.79\" circumfrence.\u003cbr\u003e \u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e \u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. The communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThese kits come with instructions on how to install them and also include the mounting hardware that you'll need to mount the antenna. Installing these requires running the male connector into the cellular communicator's casing and plugging it in where the stock antenna was plugged in.\u003c\/p\u003e","published_at":"2016-12-15T00:41:00-05:00","created_at":"2017-01-23T07:13:42-05:00","vendor":"AlarmSystemStore.com","type":"DSC PowerSeries NEO Accessories \u0026 Expansion","tags":["DSC Communicators","DSC PowerSeries NEO","DSC PowerSeries NEO Accessories \u0026 Expansion"],"price":10895,"price_min":10895,"price_max":10895,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526332741,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSCGS25ANTQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC GS25ANTQ 25 FT Quad External Antenna Extension Kit","public_title":null,"options":["Default Title"],"price":10895,"weight":2268,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"deny","barcode":"DSCGS25ANTQ"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS25ANTQ-2.jpg?v=1496954708"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS25ANTQ-2.jpg?v=1496954708","options":["Title"],"content":"\u003ch2\u003eDSC GS25ANTQ 25 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eThe GS25ANTQ is an antenna extension that will let you extend the antenna of any DSC cellular communicators to 25 feet. Some people need extra length as the spot where they've placed the cellular communicator doesn't get good signal. This antenna extension will give you a 3dBi gain on signal. The antenna you get in the kit is omni-directional and must be mounted in the vertical position for optimum signal coverage. This antenna can be mounted outside or inside in higher elevations. The antenna portion of this kit measures 24\" long and has a 0.79\" circumfrence.\u003cbr\u003e \u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e \u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. The communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThese kits come with instructions on how to install them and also include the mounting hardware that you'll need to mount the antenna. Installing these requires running the male connector into the cellular communicator's casing and plugging it in where the stock antenna was plugged in.\u003c\/p\u003e"}
-
{"id":7037341125,"title":"DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit","handle":"dsc-gs50antq-50-ft-quad-external-antenna-extension","description":"\u003ch2\u003eDSC GS50ANTQ 50 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eIf you need an extension for your DSC cellular communicator because you're not getting the signal strength you need then the DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit is what you'll need to get. The antenna extension gives you a 3dBi gain to signal and it must be mounted outside. It can be used indoors in higher elevations if needed. The antenna is a quad-band dipole antenna and reports on the following frequencies - 900\/1800 \u0026amp; 850\/1900. The total weight of cable and antenna is 5 lbs. The antenna itself is 24\" and its diameter is 0.79\".\u003c\/p\u003e\n\u003cp\u003eAs with any of these antenna extension kits; you must always mount these in a vertical position. Included in the kit will be all of the necessary mounting equipment like the mounting bracket and any screws you'll need. You will have to remove the stock antenna from the cellular communicator so that you can attach the extension. Each cellular communicator has a knock out hole on the case so that you can run the cable through it. The cable will screw onto the spot where the stock antenna was located. If you are mounting this and don't see a change in signal strength; it is recommeded to move it left to right and up to down.\u003cbr\u003e \u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e \u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. The communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-12-15T03:05:00-05:00","created_at":"2017-01-23T07:13:43-05:00","vendor":"AlarmSystemStore.com","type":"DSC PowerSeries NEO Accessories \u0026 Expansion","tags":["DSC Communicators","DSC PowerSeries NEO","DSC PowerSeries NEO Accessories \u0026 Expansion"],"price":17850,"price_min":17850,"price_max":17850,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526335685,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSCGS50ANTQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit","public_title":null,"options":["Default Title"],"price":17850,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"DSCGS50ANTQ"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS50ANTQ-2.jpg?v=1496954709"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS50ANTQ-2.jpg?v=1496954709","options":["Title"],"content":"\u003ch2\u003eDSC GS50ANTQ 50 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eIf you need an extension for your DSC cellular communicator because you're not getting the signal strength you need then the DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit is what you'll need to get. The antenna extension gives you a 3dBi gain to signal and it must be mounted outside. It can be used indoors in higher elevations if needed. The antenna is a quad-band dipole antenna and reports on the following frequencies - 900\/1800 \u0026amp; 850\/1900. The total weight of cable and antenna is 5 lbs. The antenna itself is 24\" and its diameter is 0.79\".\u003c\/p\u003e\n\u003cp\u003eAs with any of these antenna extension kits; you must always mount these in a vertical position. Included in the kit will be all of the necessary mounting equipment like the mounting bracket and any screws you'll need. You will have to remove the stock antenna from the cellular communicator so that you can attach the extension. Each cellular communicator has a knock out hole on the case so that you can run the cable through it. The cable will screw onto the spot where the stock antenna was located. If you are mounting this and don't see a change in signal strength; it is recommeded to move it left to right and up to down.\u003cbr\u003e \u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e \u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. The communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$178.50
DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit If you need an extension for your DSC cellular communicator because you're not getting the signal strength you need then the DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit is what you'll need to get. The antenna extension gives you a 3dBi gain to signal and it must be mounted outside. It can be used indoors in higher elevations if needed. The antenna is a quad-band dipole antenna and reports on the following frequencies - 900/1800 & 850/1900. The total weight of cable and antenna is 5 lbs. The antenna itself is 24" and its diameter is 0.79". As with any of these antenna extension kits; you must always mount these in a vertical position. Included in the kit will be all of the necessary mounting equipment like the mounting bracket and any screws you'll need. You will have to...
DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit If you need an extension for your DSC cellular communicator because...
-
{"id":7037341125,"title":"DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit","handle":"dsc-gs50antq-50-ft-quad-external-antenna-extension","description":"\u003ch2\u003eDSC GS50ANTQ 50 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eIf you need an extension for your DSC cellular communicator because you're not getting the signal strength you need then the DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit is what you'll need to get. The antenna extension gives you a 3dBi gain to signal and it must be mounted outside. It can be used indoors in higher elevations if needed. The antenna is a quad-band dipole antenna and reports on the following frequencies - 900\/1800 \u0026amp; 850\/1900. The total weight of cable and antenna is 5 lbs. The antenna itself is 24\" and its diameter is 0.79\".\u003c\/p\u003e\n\u003cp\u003eAs with any of these antenna extension kits; you must always mount these in a vertical position. Included in the kit will be all of the necessary mounting equipment like the mounting bracket and any screws you'll need. You will have to remove the stock antenna from the cellular communicator so that you can attach the extension. Each cellular communicator has a knock out hole on the case so that you can run the cable through it. The cable will screw onto the spot where the stock antenna was located. If you are mounting this and don't see a change in signal strength; it is recommeded to move it left to right and up to down.\u003cbr\u003e \u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e \u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. The communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-12-15T03:05:00-05:00","created_at":"2017-01-23T07:13:43-05:00","vendor":"AlarmSystemStore.com","type":"DSC PowerSeries NEO Accessories \u0026 Expansion","tags":["DSC Communicators","DSC PowerSeries NEO","DSC PowerSeries NEO Accessories \u0026 Expansion"],"price":17850,"price_min":17850,"price_max":17850,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526335685,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSCGS50ANTQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit","public_title":null,"options":["Default Title"],"price":17850,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"DSCGS50ANTQ"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS50ANTQ-2.jpg?v=1496954709"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/DSCGS50ANTQ-2.jpg?v=1496954709","options":["Title"],"content":"\u003ch2\u003eDSC GS50ANTQ 50 FT Quad External Antenna Extension Kit\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eIf you need an extension for your DSC cellular communicator because you're not getting the signal strength you need then the DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit is what you'll need to get. The antenna extension gives you a 3dBi gain to signal and it must be mounted outside. It can be used indoors in higher elevations if needed. The antenna is a quad-band dipole antenna and reports on the following frequencies - 900\/1800 \u0026amp; 850\/1900. The total weight of cable and antenna is 5 lbs. The antenna itself is 24\" and its diameter is 0.79\".\u003c\/p\u003e\n\u003cp\u003eAs with any of these antenna extension kits; you must always mount these in a vertical position. Included in the kit will be all of the necessary mounting equipment like the mounting bracket and any screws you'll need. You will have to remove the stock antenna from the cellular communicator so that you can attach the extension. Each cellular communicator has a knock out hole on the case so that you can run the cable through it. The cable will screw onto the spot where the stock antenna was located. If you are mounting this and don't see a change in signal strength; it is recommeded to move it left to right and up to down.\u003cbr\u003e \u003cbr\u003eYou can us this extension kit with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl2603gr-dual-path-gsm-ip-communicator\" title=\"DSC TL2603GR Dual Path GSM\/IP Communicator, DSCTL2603GRUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC TL2603GR\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-3g2060rusa-gsm-communicator-cell-backup\" title=\"DSC 3G2060RUSA GSM Communicator Cell Backup, DSC3G2060RUSA\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC 3G2060RUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl2803gusa-internet-hspa-dual-path-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO TL2803GUSA\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g2080usa-hspa-cellular-alarm-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO 3G2080USA\u003c\/a\u003e,the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080vz-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080VZ\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-cd8080ivz-cellular-communicator-image-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO CD8080IVZ\u003cbr\u003e \u003c\/a\u003e, the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080iat-cellular-communicator-image-sensor\"\u003eDSC NEO 3G8080IAT\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-neo-3g8080at-cellular-communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 3G8080AT\u003c\/a\u003e. The communicators listed above work with our \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1616-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1616\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1832-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1832\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-power-1864-alarm-systems\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC Power Series 1864\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC PowerSeries NEO systems\u003c\/a\u003e. These systems use cellular communicators for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/base-alarm-monitoring-service-fee\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecentral station monitoring service\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Interactive services\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}