Selling direct
to DIY since 1997!
AlarmSystemStore.com BBB Business Review
AlarmSystemStore.com BBB Business Review
Home / Products / Uplink 5500VZ Universal LTE Verizon Cellular Communicator
c_f {}
custom_fields {}

Uplink 5500VZ Universal LTE Verizon Cellular Communicator

Quick Overview
Uplink 5500VZ Universal LTE Verizon Cellular Communicator The Uplink 5500VZ is a universal cellular communicator that can be used to send alarm signals to a central station monitoring service. This transmits...

$139.50

Sold Out

Uplink 5500VZ Universal LTE Verizon Cellular Communicator

The Uplink 5500VZ is a universal cellular communicator that can be used to send alarm signals to a central station monitoring service. This transmits signals via the Verizon cellular network. The 5500VZ can be connected to an alarm system's bell terminals. Depending on the way the siren pulses; it will send a simple burglary or fire signal. It can also be hooked up to trip from a 12V trigger. This would be used, for instance, if you wanted to have a single switch trigger the cellular communicator instead of having it hooked to an alarm system. An example of this would be using a flood switch to trigger the radio to send a signal. Not only can this be used for communicating with a central station monitoring company but it can also be activated just to send you messages via email / sms text alerts (by using your phone's email address).

The 5500VZ is compatible for use with the 3G and LTE 4G networks and transmits signal over the 850 &1900 MHz frequency bands. The communicator can report in the following formats: Contact ID, SIA, Pulse 4/2 and Modem IIe/IIIa2. The 5500VZ can be powered off of the alarm systems power or you can use a 12V power supply. There is no included 12V power supply so you will have to source that yourself if that's the way you choose to power the 5500VZ. 

The 5500VZ has 4 inputs. Input 1 can be used for the siren hookup and inputs 2-4 can be used for the 12V trigger mentioned above. This cellular radio also features 2 outputs that can be used to initiate a communications trouble signal back to the alarm system or they can be used to trigger other devices in the installation area. 

The communicator measures 4.75 x 3.3 x 1.3 Inches and operates off of 12V DC power. It draws 500 mA upon transmission and a 28 mA standby draw. This is a great, simple choice for alarm communications.

Uplink 5500 Data sheet

Features

Extended Information

Related Products

Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module
  • {"id":7037388101,"title":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module","handle":"envisalink-4-ip-communicator-security-interface-module","description":"\u003ch2\u003eEnvisaLink EVL-4EZR IP Communicator Security Interface Module\u003c\/h2\u003e\n\u003cp\u003eIf you're looking for a great self-monitoring solution for your DSC Power Series or Honeywell Vista alarm system then the Envisalink EVL-4EZR is the add-on for you! If you have a DSC or Honeywell; now you can get your own personal notifications of any type of alarm status. The Envisalink 4 will also allow you to remotely arm and disarm your alarm system when you're away from home or the office just in case the need arises. You can also bypass zones that may become troublesome.\u003cbr\u003e\u003cbr\u003eAnother feature of the Envisalink 4 is the ability to take port-forwarded surveillance cameras and view them in the Envisalink 4 user interface. All that needs to be done is to plug in the IP address of the port-forwarded cameras into the settings and you can check the cameras at your home or business at the same time you're checking your alarm status.\u003c\/p\u003e\n\u003cp\u003eThe EVL-4 does need an Ethernet (CAT5 \/ CAT6) cable to connect to a home or business router, but the manufacturer, Eyez-On, has said that an Ethernet to WIFI adapter may be used such as the IOGEAR GWU627 Universal Ethernet to Wi-Fi N Adapter. They only recommend this if it is absolutely beyond your ability to run a cable between the alarm system and the router.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlarm panel compatibility:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDSC PowerSeries1 (1555,1555 MX, 1575, 5010 (832),5020 (864), 1616, 1832,1864)\u003cbr\u003e\u003cbr\u003eHoneywell Vista Panels (Vista20P, 21iP, 15P, 10P,128P, and 250P)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat comes in the box:\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003eEnvisalink 4 Module\u003cbr\u003eMounting Stand-offs\u003cbr\u003eInstallation Guide\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003ePanel Powered: 9-14Vdc\u003cbr\u003ePower Draw: 75 mA\u003cbr\u003e100BaseT Ethernet\u003cbr\u003eOperating Temp: 0° to 50°C\u003cbr\u003eHumidity: 5% to 95%\u003cbr\u003eExpansion Port: 12Vdc @ 200mA maximum.\u003cbr\u003eConnectors: RJ45, 4-\u003cbr\u003eTerminal Screw-down\u003cbr\u003eDimensions: 10.5 cm (4-3\/16″) x 4.2 cm (1-11\/16″)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/Envisalink4QuickStart.pdf?16145946701472997053\" target=\"_blank\" title=\"Envisalink 4 Quick Install manual\" rel=\"noopener noreferrer\"\u003eEnvisalink 4 Quick Install manual\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-11-02T06:15:00-04:00","created_at":"2017-01-23T07:21:57-05:00","vendor":"AlarmSystemStore.com","type":"Universal Communicators","tags":["DSC Accessories \u0026 Expansion Modules","DSC Expansion Modules","envisa","envisalink","envisilink","evl","evl 4","EVL-4EZR","evl4","EVL4-EZR","eyezon","IP \u0026 Cellular Alarm Communicators","Universal Communicators"],"price":10995,"price_min":10995,"price_max":10995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526693509,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Z-EVL-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module","public_title":null,"options":["Default Title"],"price":10995,"weight":340,"compare_at_price":null,"inventory_quantity":90,"inventory_management":"shopify","inventory_policy":"continue","barcode":"Z-EVL-4"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-102604.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-974091.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-677243.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-436354.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-281053.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-572104.jpg?v=1595526182"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-102604.jpg?v=1595526182","options":["Title"],"media":[{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363133898854,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-102604.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-102604.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363133931622,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-974091.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-974091.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363133997158,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-677243.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-677243.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363134062694,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-436354.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-436354.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363134095462,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-281053.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-281053.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363134128230,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-572104.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-572104.jpg?v=1595526182","width":1024}],"content":"\u003ch2\u003eEnvisaLink EVL-4EZR IP Communicator Security Interface Module\u003c\/h2\u003e\n\u003cp\u003eIf you're looking for a great self-monitoring solution for your DSC Power Series or Honeywell Vista alarm system then the Envisalink EVL-4EZR is the add-on for you! If you have a DSC or Honeywell; now you can get your own personal notifications of any type of alarm status. The Envisalink 4 will also allow you to remotely arm and disarm your alarm system when you're away from home or the office just in case the need arises. You can also bypass zones that may become troublesome.\u003cbr\u003e\u003cbr\u003eAnother feature of the Envisalink 4 is the ability to take port-forwarded surveillance cameras and view them in the Envisalink 4 user interface. All that needs to be done is to plug in the IP address of the port-forwarded cameras into the settings and you can check the cameras at your home or business at the same time you're checking your alarm status.\u003c\/p\u003e\n\u003cp\u003eThe EVL-4 does need an Ethernet (CAT5 \/ CAT6) cable to connect to a home or business router, but the manufacturer, Eyez-On, has said that an Ethernet to WIFI adapter may be used such as the IOGEAR GWU627 Universal Ethernet to Wi-Fi N Adapter. They only recommend this if it is absolutely beyond your ability to run a cable between the alarm system and the router.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlarm panel compatibility:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDSC PowerSeries1 (1555,1555 MX, 1575, 5010 (832),5020 (864), 1616, 1832,1864)\u003cbr\u003e\u003cbr\u003eHoneywell Vista Panels (Vista20P, 21iP, 15P, 10P,128P, and 250P)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat comes in the box:\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003eEnvisalink 4 Module\u003cbr\u003eMounting Stand-offs\u003cbr\u003eInstallation Guide\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003ePanel Powered: 9-14Vdc\u003cbr\u003ePower Draw: 75 mA\u003cbr\u003e100BaseT Ethernet\u003cbr\u003eOperating Temp: 0° to 50°C\u003cbr\u003eHumidity: 5% to 95%\u003cbr\u003eExpansion Port: 12Vdc @ 200mA maximum.\u003cbr\u003eConnectors: RJ45, 4-\u003cbr\u003eTerminal Screw-down\u003cbr\u003eDimensions: 10.5 cm (4-3\/16″) x 4.2 cm (1-11\/16″)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/Envisalink4QuickStart.pdf?16145946701472997053\" target=\"_blank\" title=\"Envisalink 4 Quick Install manual\" rel=\"noopener noreferrer\"\u003eEnvisalink 4 Quick Install manual\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e"}
DSC Accessories & Expansion Modules
Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module
$109.95
EnvisaLink EVL-4EZR IP Communicator Security Interface Module If you're looking for a great self-monitoring solution for your DSC Power Series or Honeywell Vista alarm system then the Envisalink EVL-4EZR is the add-on for you! If you have a DSC or Honeywell; now you can get your own personal notifications of any type of alarm status. The Envisalink 4 will also allow you to remotely arm and disarm your alarm system when you're away from home or the office just in case the need arises. You can also bypass zones that may become troublesome.Another feature of the Envisalink 4 is the ability to take port-forwarded surveillance cameras and view them in the Envisalink 4 user interface. All that needs to be done is to plug in the IP address of the port-forwarded cameras into the settings and you can check the cameras at your home or business at the same time...
EnvisaLink EVL-4EZR IP Communicator Security Interface Module If you're looking for a great self-monitoring solution for your DSC Power Series...
  • {"id":7037388101,"title":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module","handle":"envisalink-4-ip-communicator-security-interface-module","description":"\u003ch2\u003eEnvisaLink EVL-4EZR IP Communicator Security Interface Module\u003c\/h2\u003e\n\u003cp\u003eIf you're looking for a great self-monitoring solution for your DSC Power Series or Honeywell Vista alarm system then the Envisalink EVL-4EZR is the add-on for you! If you have a DSC or Honeywell; now you can get your own personal notifications of any type of alarm status. The Envisalink 4 will also allow you to remotely arm and disarm your alarm system when you're away from home or the office just in case the need arises. You can also bypass zones that may become troublesome.\u003cbr\u003e\u003cbr\u003eAnother feature of the Envisalink 4 is the ability to take port-forwarded surveillance cameras and view them in the Envisalink 4 user interface. All that needs to be done is to plug in the IP address of the port-forwarded cameras into the settings and you can check the cameras at your home or business at the same time you're checking your alarm status.\u003c\/p\u003e\n\u003cp\u003eThe EVL-4 does need an Ethernet (CAT5 \/ CAT6) cable to connect to a home or business router, but the manufacturer, Eyez-On, has said that an Ethernet to WIFI adapter may be used such as the IOGEAR GWU627 Universal Ethernet to Wi-Fi N Adapter. They only recommend this if it is absolutely beyond your ability to run a cable between the alarm system and the router.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlarm panel compatibility:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDSC PowerSeries1 (1555,1555 MX, 1575, 5010 (832),5020 (864), 1616, 1832,1864)\u003cbr\u003e\u003cbr\u003eHoneywell Vista Panels (Vista20P, 21iP, 15P, 10P,128P, and 250P)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat comes in the box:\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003eEnvisalink 4 Module\u003cbr\u003eMounting Stand-offs\u003cbr\u003eInstallation Guide\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003ePanel Powered: 9-14Vdc\u003cbr\u003ePower Draw: 75 mA\u003cbr\u003e100BaseT Ethernet\u003cbr\u003eOperating Temp: 0° to 50°C\u003cbr\u003eHumidity: 5% to 95%\u003cbr\u003eExpansion Port: 12Vdc @ 200mA maximum.\u003cbr\u003eConnectors: RJ45, 4-\u003cbr\u003eTerminal Screw-down\u003cbr\u003eDimensions: 10.5 cm (4-3\/16″) x 4.2 cm (1-11\/16″)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/Envisalink4QuickStart.pdf?16145946701472997053\" target=\"_blank\" title=\"Envisalink 4 Quick Install manual\" rel=\"noopener noreferrer\"\u003eEnvisalink 4 Quick Install manual\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-11-02T06:15:00-04:00","created_at":"2017-01-23T07:21:57-05:00","vendor":"AlarmSystemStore.com","type":"Universal Communicators","tags":["DSC Accessories \u0026 Expansion Modules","DSC Expansion Modules","envisa","envisalink","envisilink","evl","evl 4","EVL-4EZR","evl4","EVL4-EZR","eyezon","IP \u0026 Cellular Alarm Communicators","Universal Communicators"],"price":10995,"price_min":10995,"price_max":10995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526693509,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Z-EVL-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module","public_title":null,"options":["Default Title"],"price":10995,"weight":340,"compare_at_price":null,"inventory_quantity":90,"inventory_management":"shopify","inventory_policy":"continue","barcode":"Z-EVL-4"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-102604.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-974091.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-677243.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-436354.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-281053.jpg?v=1595526182","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-572104.jpg?v=1595526182"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-102604.jpg?v=1595526182","options":["Title"],"media":[{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363133898854,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-102604.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-102604.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363133931622,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-974091.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-974091.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363133997158,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-677243.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-677243.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363134062694,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-436354.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-436354.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363134095462,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-281053.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-281053.jpg?v=1595526182","width":1024},{"alt":"Eyezon EnvisaLink EVL-4EZR IP Communicator Security Interface Module - AlarmSystemStore.com","id":7363134128230,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-572104.jpg?v=1595526182"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/eyezon-envisalink-evl-4ezr-ip-communicator-security-interface-module-572104.jpg?v=1595526182","width":1024}],"content":"\u003ch2\u003eEnvisaLink EVL-4EZR IP Communicator Security Interface Module\u003c\/h2\u003e\n\u003cp\u003eIf you're looking for a great self-monitoring solution for your DSC Power Series or Honeywell Vista alarm system then the Envisalink EVL-4EZR is the add-on for you! If you have a DSC or Honeywell; now you can get your own personal notifications of any type of alarm status. The Envisalink 4 will also allow you to remotely arm and disarm your alarm system when you're away from home or the office just in case the need arises. You can also bypass zones that may become troublesome.\u003cbr\u003e\u003cbr\u003eAnother feature of the Envisalink 4 is the ability to take port-forwarded surveillance cameras and view them in the Envisalink 4 user interface. All that needs to be done is to plug in the IP address of the port-forwarded cameras into the settings and you can check the cameras at your home or business at the same time you're checking your alarm status.\u003c\/p\u003e\n\u003cp\u003eThe EVL-4 does need an Ethernet (CAT5 \/ CAT6) cable to connect to a home or business router, but the manufacturer, Eyez-On, has said that an Ethernet to WIFI adapter may be used such as the IOGEAR GWU627 Universal Ethernet to Wi-Fi N Adapter. They only recommend this if it is absolutely beyond your ability to run a cable between the alarm system and the router.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlarm panel compatibility:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDSC PowerSeries1 (1555,1555 MX, 1575, 5010 (832),5020 (864), 1616, 1832,1864)\u003cbr\u003e\u003cbr\u003eHoneywell Vista Panels (Vista20P, 21iP, 15P, 10P,128P, and 250P)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat comes in the box:\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003eEnvisalink 4 Module\u003cbr\u003eMounting Stand-offs\u003cbr\u003eInstallation Guide\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003ePanel Powered: 9-14Vdc\u003cbr\u003ePower Draw: 75 mA\u003cbr\u003e100BaseT Ethernet\u003cbr\u003eOperating Temp: 0° to 50°C\u003cbr\u003eHumidity: 5% to 95%\u003cbr\u003eExpansion Port: 12Vdc @ 200mA maximum.\u003cbr\u003eConnectors: RJ45, 4-\u003cbr\u003eTerminal Screw-down\u003cbr\u003eDimensions: 10.5 cm (4-3\/16″) x 4.2 cm (1-11\/16″)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/Envisalink4QuickStart.pdf?16145946701472997053\" target=\"_blank\" title=\"Envisalink 4 Quick Install manual\" rel=\"noopener noreferrer\"\u003eEnvisalink 4 Quick Install manual\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Uplink 5500EZ LTE Universal Communicator
Sales
Uplink 5500EZ LTE Universal Communicator
Sold Out
Uplink 5500EZ LTE Universal Communicator  The Uplink 5500EZ is a universal cellular communicator that can be used to send alarm signals to a central station monitoring service. The 5500EZ can be connected to an alarm system's bell terminals. Depending on the way the siren pulses; it will send a simple burglary or fire signal. It can also be hooked up to trip from a 12V trigger. This would be used, for instance, if you wanted to have a single switch trigger the cellular communicator instead of having it hooked to an alarm system. An example of this would be using a flood switch to trigger the radio to send a signal. The 5500EZ is compatible for use with the 3G and LTE 4G networks and transmits signal over the 850 &1900 MHz frequency bands. The 5500EZ can be powered off of the alarm systems power or you can use a 12V...
Uplink 5500EZ LTE Universal Communicator  The Uplink 5500EZ is a universal cellular communicator that can be used to send alarm...
Uplink LTE30EX LTE Primary Cellular Alarm Communicator
  • {"id":514118647852,"title":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator","handle":"uplink-lte30ex-lte-primary-cellular-alarm-communicator","description":"\u003ch2\u003e\u003cspan\u003eUplink LTE30EX LTE Primary Cellular Alarm Communicator\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Uplink LTE30EX is a universal cellular communicator that can be\u003cbr\u003eused for a variety of purposes and applications. It can be used with\u003cbr\u003ewith an alarm system or as a reporting device for sensors such as from\u003cbr\u003ewater or temperature sensors via a voltage or open collector trigger.\u003cbr\u003eThe LTE30EX can either use dialer capture by pulling full data\u003cbr\u003einformation from an alarm panel's tip and ring terminals or it can be\u003cbr\u003etriggered via a voltage trigger from an open collector or siren output\u003cbr\u003eof an alarm panel for generic alarm signals. Additionally, the voltage\u003cbr\u003etrigger can differentiate two different report events based on if the\u003cbr\u003evoltage trigger is steady or pulsed. The communicator sends signals\u003cbr\u003eover the LTE 4G network and can report to a central station in all\u003cbr\u003emajor report formats, including the popular Contact ID and SIA\u003cbr\u003eformats. The LTE30EX can also be configured to send event\u003cbr\u003enotifications via email or text standalone without any central station\u003cbr\u003eservices or in addition to central station services.\u003cbr\u003e\u003cbr\u003eThe LTE30EX has on-board LEDs to measure status and signal strength.\u003cbr\u003eThe communicator operates on the 850 and 1900 MHz frequencies. The\u003cbr\u003eunit itself measures 2.5 inches high x 5.4 inches wide x 10.5 inches\u003cbr\u003edeep. The LTE30EX operates on12VDC power and has an average standby\u003cbr\u003ecurrent draw of 125 ma and maximum peak current draw of up to 1500ma\u003cbr\u003eduring transmission. When used with an alarm system this power is\u003cbr\u003eoften supplied via the alarm systems 12VDC output or backup battery,\u003cbr\u003ebut it can  be used with a separate standalone class 2 power supply\u003cbr\u003ethat meets the minimum current draw requirements.\u003cbr\u003e\u003cbr\u003eThe communicator offers both terminal inputs and outputs as well as an\u003cbr\u003eRJ45 jack connection if using dialer capture. Configuration of the\u003cbr\u003emodes and basic settings is via DIP switches inside the communicator\u003cbr\u003ethat will need to be set for whatever mode you're using for trigger\u003cbr\u003eand communication. Central station and or email \/ text fields are\u003cbr\u003econfigured via Uplink's dealer portal at time of activation for the\u003cbr\u003eradio. Once the unit's dip switch settings are set and the unit is\u003cbr\u003epowered up simply \"\u003ca href=\"https:\/\/www.alarmsystemstore.com\/pages\/contact-us-1\" title=\"Contact Us\"\u003econtact us\u003c\/a\u003e\" for activation.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe LTE30EX also has one relay output that can be activated based on\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ecertain communicator events, such as a loss of cell service. It can be\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eused to trigger an input on an alarm panel or other local events if\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003edesired.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLike most Uplink communicators, the LTE30EX is simple to install and\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eset up. It's a great choice for someone that just needs simple alarm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eor event reporting without other more in depth features such as\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003einteractive or home automation control. Since it can be used\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003estandalone and also report directly via email or in tandem with a\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ecentral station, it's also the first choice we recommend for non alarm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003esystem uses such as communication from a flood or temperature sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBasically anything that can be configured to send a 9 to 12 VDC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003etrigger signal or an open collector upon activation can trigger a\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003enotification event.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/LTE30EX.pdf?10962444884597888817\" title=\"Uplink LTE30EX Specifications Sheet\"\u003e\u003cspan\u003eUplink LTE30EX Specifications Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/LTE30EX-Installation-and-User-Guide.pdf?10962444884597888817\" title=\"Uplink LTE30EX Installtion Guide\"\u003e\u003cspan\u003eUplink LTE30EX Installtion Guide\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e","published_at":"2018-02-12T15:50:55-05:00","created_at":"2018-02-09T10:35:26-05:00","vendor":"AlarmSystemStore.com","type":"Universal Communicators","tags":["IP \u0026 Cellular Alarm Communicators","Universal Communicators"],"price":17695,"price_min":17695,"price_max":17695,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6914925690924,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UPL-LTE30EX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator","public_title":null,"options":["Default Title"],"price":17695,"weight":1134,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":"UPL-LTE30EX"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-265040.jpg?v=1595526355","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-957786.jpg?v=1595526355","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-717646.jpg?v=1595526355","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-402299.jpg?v=1595526355"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-265040.jpg?v=1595526355","options":["Title"],"media":[{"alt":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator - AlarmSystemStore.com","id":7363189407846,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-265040.jpg?v=1595526355"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-265040.jpg?v=1595526355","width":1024},{"alt":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator - AlarmSystemStore.com","id":7363189440614,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-957786.jpg?v=1595526355"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-957786.jpg?v=1595526355","width":1024},{"alt":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator - AlarmSystemStore.com","id":7363189473382,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-717646.jpg?v=1595526355"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-717646.jpg?v=1595526355","width":1024},{"alt":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator - AlarmSystemStore.com","id":7363189506150,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-402299.jpg?v=1595526355"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-402299.jpg?v=1595526355","width":1024}],"content":"\u003ch2\u003e\u003cspan\u003eUplink LTE30EX LTE Primary Cellular Alarm Communicator\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Uplink LTE30EX is a universal cellular communicator that can be\u003cbr\u003eused for a variety of purposes and applications. It can be used with\u003cbr\u003ewith an alarm system or as a reporting device for sensors such as from\u003cbr\u003ewater or temperature sensors via a voltage or open collector trigger.\u003cbr\u003eThe LTE30EX can either use dialer capture by pulling full data\u003cbr\u003einformation from an alarm panel's tip and ring terminals or it can be\u003cbr\u003etriggered via a voltage trigger from an open collector or siren output\u003cbr\u003eof an alarm panel for generic alarm signals. Additionally, the voltage\u003cbr\u003etrigger can differentiate two different report events based on if the\u003cbr\u003evoltage trigger is steady or pulsed. The communicator sends signals\u003cbr\u003eover the LTE 4G network and can report to a central station in all\u003cbr\u003emajor report formats, including the popular Contact ID and SIA\u003cbr\u003eformats. The LTE30EX can also be configured to send event\u003cbr\u003enotifications via email or text standalone without any central station\u003cbr\u003eservices or in addition to central station services.\u003cbr\u003e\u003cbr\u003eThe LTE30EX has on-board LEDs to measure status and signal strength.\u003cbr\u003eThe communicator operates on the 850 and 1900 MHz frequencies. The\u003cbr\u003eunit itself measures 2.5 inches high x 5.4 inches wide x 10.5 inches\u003cbr\u003edeep. The LTE30EX operates on12VDC power and has an average standby\u003cbr\u003ecurrent draw of 125 ma and maximum peak current draw of up to 1500ma\u003cbr\u003eduring transmission. When used with an alarm system this power is\u003cbr\u003eoften supplied via the alarm systems 12VDC output or backup battery,\u003cbr\u003ebut it can  be used with a separate standalone class 2 power supply\u003cbr\u003ethat meets the minimum current draw requirements.\u003cbr\u003e\u003cbr\u003eThe communicator offers both terminal inputs and outputs as well as an\u003cbr\u003eRJ45 jack connection if using dialer capture. Configuration of the\u003cbr\u003emodes and basic settings is via DIP switches inside the communicator\u003cbr\u003ethat will need to be set for whatever mode you're using for trigger\u003cbr\u003eand communication. Central station and or email \/ text fields are\u003cbr\u003econfigured via Uplink's dealer portal at time of activation for the\u003cbr\u003eradio. Once the unit's dip switch settings are set and the unit is\u003cbr\u003epowered up simply \"\u003ca href=\"https:\/\/www.alarmsystemstore.com\/pages\/contact-us-1\" title=\"Contact Us\"\u003econtact us\u003c\/a\u003e\" for activation.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe LTE30EX also has one relay output that can be activated based on\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ecertain communicator events, such as a loss of cell service. It can be\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eused to trigger an input on an alarm panel or other local events if\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003edesired.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLike most Uplink communicators, the LTE30EX is simple to install and\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eset up. It's a great choice for someone that just needs simple alarm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eor event reporting without other more in depth features such as\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003einteractive or home automation control. Since it can be used\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003estandalone and also report directly via email or in tandem with a\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ecentral station, it's also the first choice we recommend for non alarm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003esystem uses such as communication from a flood or temperature sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBasically anything that can be configured to send a 9 to 12 VDC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003etrigger signal or an open collector upon activation can trigger a\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003enotification event.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/LTE30EX.pdf?10962444884597888817\" title=\"Uplink LTE30EX Specifications Sheet\"\u003e\u003cspan\u003eUplink LTE30EX Specifications Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/LTE30EX-Installation-and-User-Guide.pdf?10962444884597888817\" title=\"Uplink LTE30EX Installtion Guide\"\u003e\u003cspan\u003eUplink LTE30EX Installtion Guide\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e"}
Universal Communicators
Uplink LTE30EX LTE Primary Cellular Alarm Communicator
$176.95
Uplink LTE30EX LTE Primary Cellular Alarm Communicator The Uplink LTE30EX is a universal cellular communicator that can beused for a variety of purposes and applications. It can be used withwith an alarm system or as a reporting device for sensors such as fromwater or temperature sensors via a voltage or open collector trigger.The LTE30EX can either use dialer capture by pulling full datainformation from an alarm panel's tip and ring terminals or it can betriggered via a voltage trigger from an open collector or siren outputof an alarm panel for generic alarm signals. Additionally, the voltagetrigger can differentiate two different report events based on if thevoltage trigger is steady or pulsed. The communicator sends signalsover the LTE 4G network and can report to a central station in allmajor report formats, including the popular Contact ID and SIAformats. The LTE30EX can also be configured to send eventnotifications via email or text...
Uplink LTE30EX LTE Primary Cellular Alarm Communicator The Uplink LTE30EX is a universal cellular communicator that can beused for a...
  • {"id":514118647852,"title":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator","handle":"uplink-lte30ex-lte-primary-cellular-alarm-communicator","description":"\u003ch2\u003e\u003cspan\u003eUplink LTE30EX LTE Primary Cellular Alarm Communicator\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Uplink LTE30EX is a universal cellular communicator that can be\u003cbr\u003eused for a variety of purposes and applications. It can be used with\u003cbr\u003ewith an alarm system or as a reporting device for sensors such as from\u003cbr\u003ewater or temperature sensors via a voltage or open collector trigger.\u003cbr\u003eThe LTE30EX can either use dialer capture by pulling full data\u003cbr\u003einformation from an alarm panel's tip and ring terminals or it can be\u003cbr\u003etriggered via a voltage trigger from an open collector or siren output\u003cbr\u003eof an alarm panel for generic alarm signals. Additionally, the voltage\u003cbr\u003etrigger can differentiate two different report events based on if the\u003cbr\u003evoltage trigger is steady or pulsed. The communicator sends signals\u003cbr\u003eover the LTE 4G network and can report to a central station in all\u003cbr\u003emajor report formats, including the popular Contact ID and SIA\u003cbr\u003eformats. The LTE30EX can also be configured to send event\u003cbr\u003enotifications via email or text standalone without any central station\u003cbr\u003eservices or in addition to central station services.\u003cbr\u003e\u003cbr\u003eThe LTE30EX has on-board LEDs to measure status and signal strength.\u003cbr\u003eThe communicator operates on the 850 and 1900 MHz frequencies. The\u003cbr\u003eunit itself measures 2.5 inches high x 5.4 inches wide x 10.5 inches\u003cbr\u003edeep. The LTE30EX operates on12VDC power and has an average standby\u003cbr\u003ecurrent draw of 125 ma and maximum peak current draw of up to 1500ma\u003cbr\u003eduring transmission. When used with an alarm system this power is\u003cbr\u003eoften supplied via the alarm systems 12VDC output or backup battery,\u003cbr\u003ebut it can  be used with a separate standalone class 2 power supply\u003cbr\u003ethat meets the minimum current draw requirements.\u003cbr\u003e\u003cbr\u003eThe communicator offers both terminal inputs and outputs as well as an\u003cbr\u003eRJ45 jack connection if using dialer capture. Configuration of the\u003cbr\u003emodes and basic settings is via DIP switches inside the communicator\u003cbr\u003ethat will need to be set for whatever mode you're using for trigger\u003cbr\u003eand communication. Central station and or email \/ text fields are\u003cbr\u003econfigured via Uplink's dealer portal at time of activation for the\u003cbr\u003eradio. Once the unit's dip switch settings are set and the unit is\u003cbr\u003epowered up simply \"\u003ca href=\"https:\/\/www.alarmsystemstore.com\/pages\/contact-us-1\" title=\"Contact Us\"\u003econtact us\u003c\/a\u003e\" for activation.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe LTE30EX also has one relay output that can be activated based on\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ecertain communicator events, such as a loss of cell service. It can be\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eused to trigger an input on an alarm panel or other local events if\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003edesired.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLike most Uplink communicators, the LTE30EX is simple to install and\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eset up. It's a great choice for someone that just needs simple alarm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eor event reporting without other more in depth features such as\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003einteractive or home automation control. Since it can be used\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003estandalone and also report directly via email or in tandem with a\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ecentral station, it's also the first choice we recommend for non alarm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003esystem uses such as communication from a flood or temperature sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBasically anything that can be configured to send a 9 to 12 VDC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003etrigger signal or an open collector upon activation can trigger a\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003enotification event.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/LTE30EX.pdf?10962444884597888817\" title=\"Uplink LTE30EX Specifications Sheet\"\u003e\u003cspan\u003eUplink LTE30EX Specifications Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/LTE30EX-Installation-and-User-Guide.pdf?10962444884597888817\" title=\"Uplink LTE30EX Installtion Guide\"\u003e\u003cspan\u003eUplink LTE30EX Installtion Guide\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e","published_at":"2018-02-12T15:50:55-05:00","created_at":"2018-02-09T10:35:26-05:00","vendor":"AlarmSystemStore.com","type":"Universal Communicators","tags":["IP \u0026 Cellular Alarm Communicators","Universal Communicators"],"price":17695,"price_min":17695,"price_max":17695,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6914925690924,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UPL-LTE30EX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator","public_title":null,"options":["Default Title"],"price":17695,"weight":1134,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":"UPL-LTE30EX"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-265040.jpg?v=1595526355","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-957786.jpg?v=1595526355","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-717646.jpg?v=1595526355","\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-402299.jpg?v=1595526355"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-265040.jpg?v=1595526355","options":["Title"],"media":[{"alt":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator - AlarmSystemStore.com","id":7363189407846,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-265040.jpg?v=1595526355"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-265040.jpg?v=1595526355","width":1024},{"alt":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator - AlarmSystemStore.com","id":7363189440614,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-957786.jpg?v=1595526355"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-957786.jpg?v=1595526355","width":1024},{"alt":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator - AlarmSystemStore.com","id":7363189473382,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-717646.jpg?v=1595526355"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-717646.jpg?v=1595526355","width":1024},{"alt":"Uplink LTE30EX LTE Primary Cellular Alarm Communicator - AlarmSystemStore.com","id":7363189506150,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-402299.jpg?v=1595526355"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/uplink-lte30ex-lte-primary-cellular-alarm-communicator-402299.jpg?v=1595526355","width":1024}],"content":"\u003ch2\u003e\u003cspan\u003eUplink LTE30EX LTE Primary Cellular Alarm Communicator\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Uplink LTE30EX is a universal cellular communicator that can be\u003cbr\u003eused for a variety of purposes and applications. It can be used with\u003cbr\u003ewith an alarm system or as a reporting device for sensors such as from\u003cbr\u003ewater or temperature sensors via a voltage or open collector trigger.\u003cbr\u003eThe LTE30EX can either use dialer capture by pulling full data\u003cbr\u003einformation from an alarm panel's tip and ring terminals or it can be\u003cbr\u003etriggered via a voltage trigger from an open collector or siren output\u003cbr\u003eof an alarm panel for generic alarm signals. Additionally, the voltage\u003cbr\u003etrigger can differentiate two different report events based on if the\u003cbr\u003evoltage trigger is steady or pulsed. The communicator sends signals\u003cbr\u003eover the LTE 4G network and can report to a central station in all\u003cbr\u003emajor report formats, including the popular Contact ID and SIA\u003cbr\u003eformats. The LTE30EX can also be configured to send event\u003cbr\u003enotifications via email or text standalone without any central station\u003cbr\u003eservices or in addition to central station services.\u003cbr\u003e\u003cbr\u003eThe LTE30EX has on-board LEDs to measure status and signal strength.\u003cbr\u003eThe communicator operates on the 850 and 1900 MHz frequencies. The\u003cbr\u003eunit itself measures 2.5 inches high x 5.4 inches wide x 10.5 inches\u003cbr\u003edeep. The LTE30EX operates on12VDC power and has an average standby\u003cbr\u003ecurrent draw of 125 ma and maximum peak current draw of up to 1500ma\u003cbr\u003eduring transmission. When used with an alarm system this power is\u003cbr\u003eoften supplied via the alarm systems 12VDC output or backup battery,\u003cbr\u003ebut it can  be used with a separate standalone class 2 power supply\u003cbr\u003ethat meets the minimum current draw requirements.\u003cbr\u003e\u003cbr\u003eThe communicator offers both terminal inputs and outputs as well as an\u003cbr\u003eRJ45 jack connection if using dialer capture. Configuration of the\u003cbr\u003emodes and basic settings is via DIP switches inside the communicator\u003cbr\u003ethat will need to be set for whatever mode you're using for trigger\u003cbr\u003eand communication. Central station and or email \/ text fields are\u003cbr\u003econfigured via Uplink's dealer portal at time of activation for the\u003cbr\u003eradio. Once the unit's dip switch settings are set and the unit is\u003cbr\u003epowered up simply \"\u003ca href=\"https:\/\/www.alarmsystemstore.com\/pages\/contact-us-1\" title=\"Contact Us\"\u003econtact us\u003c\/a\u003e\" for activation.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe LTE30EX also has one relay output that can be activated based on\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ecertain communicator events, such as a loss of cell service. It can be\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eused to trigger an input on an alarm panel or other local events if\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003edesired.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLike most Uplink communicators, the LTE30EX is simple to install and\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eset up. It's a great choice for someone that just needs simple alarm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eor event reporting without other more in depth features such as\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003einteractive or home automation control. Since it can be used\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003estandalone and also report directly via email or in tandem with a\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ecentral station, it's also the first choice we recommend for non alarm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003esystem uses such as communication from a flood or temperature sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBasically anything that can be configured to send a 9 to 12 VDC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003etrigger signal or an open collector upon activation can trigger a\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003enotification event.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/LTE30EX.pdf?10962444884597888817\" title=\"Uplink LTE30EX Specifications Sheet\"\u003e\u003cspan\u003eUplink LTE30EX Specifications Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/LTE30EX-Installation-and-User-Guide.pdf?10962444884597888817\" title=\"Uplink LTE30EX Installtion Guide\"\u003e\u003cspan\u003eUplink LTE30EX Installtion Guide\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e"}