Home / Smoke Detector Accessories / Smoke Detector Tester SmokeSabre

Buy With Confidence Seal, AlarmSystemStore

Smoke Detector Tester SmokeSabre

$15.95

Quick Overview

Quantity

In Stock

Add to Wishlist

Description
Features
Extended Information

Smoke Detector Tester SmokeSabre

The SmokeSabre is a handy way to test your smoke detectors. It's quick and convenient because of it's telescoping spray head. Flick your wrist, point and shoot. All you need is a short 0.5-1 second burst from the Sabre (repeat if necessary) to test your smoke detectors functionality. No more need to climb ladders to test your smokes and no more setting small fires with paper just to get smoke to test with.

The SmokeSabre is revolutionary in its design as the small holes in the spray head cause a better vaporization of the testing fluid allowing you to use less and for better dispersion of the testing fluid so that it doesn't leave a thick residue on the outside casing of the smoke detector. Also, when the Sabre's spray head is in the closed position it encases the trigger button to prevent accidental spraying.

We love these and we know that you will too!

NOTE: This item cannot be shipped via air and as such cannot be
shipped outside of the lower 48 USA. These also cannot be shipped via expedited shipping. (2nd Day, Overnight, etc.)

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Cancel

Related Products

System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders

{"id":7037378053,"title":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders","handle":"system-sensor-rrs-mod-reversing-relay-smokes","description":"\u003ch2\u003eSystem Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders\u003c\/h2\u003e\nThis is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003e2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)\u003cbr\u003e\u003cbr\u003eOperating Temperature Range\u003cbr\u003e32 F to 131 F (0 C to 55 C)\u003cbr\u003e\u003cbr\u003eWire Connections\u003cbr\u003e18 AWG stranded, tinned, 16 in length\u003cbr\u003e\u003cbr\u003eOperating Humidity Range\u003cbr\u003e5% to 85% non-condensing\u003cbr\u003e\u003cbr\u003eElectrical Specifications\u003cbr\u003e\u003cbr\u003eOperating Voltage\u003cbr\u003eNominal: 12\/24 V\u003cbr\u003eMin: 8.5 V\u003cbr\u003eMax: 35 V\u003cbr\u003e\u003cbr\u003eAverage Operating Current:\u003cbr\u003e25 mA\u003cbr\u003eRelay Contact Rating\u003cbr\u003e2 A @ 35 VDC\u003cbr\u003e\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eIs compatible with 2- and 4-wire i3 detectors equipped with a sounder\u003c\/li\u003e\n\u003cli\u003eActivates all i3 sounders on a loop when one alarms\u003c\/li\u003e\n\u003cli\u003eSynchronizes all i3 sounders on the loop for a clear alarm signal\u003c\/li\u003e\n\u003cli\u003eIs usable with bell\/alarm, alarm relay, or NAC outputs\u003c\/li\u003e\n\u003cli\u003eHas a field-selectable switch to accommodate both coded and continuous alarm signals\u003c\/li\u003e\n\u003cli\u003eAllows i3 detector silencing from the panel or keypad\u003c\/li\u003e\n\u003cli\u003eOperates on 12 and 24 volt systems\u003c\/li\u003e\n\u003cli\u003eSimplifies connections with quick-connect harness and color-coded wires\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2016-10-20T04:30:00-04:00","created_at":"2017-01-23T07:20:11-05:00","vendor":"System Sensor","type":"Smoke Detector Accessories","tags":["Els PW 22611","Hardwired Sensors","RRS-MOD","RRSMOD","Smoke Detector Accessories","Smoke Detectors","System Sensor"],"price":5295,"price_min":5295,"price_max":5295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526618373,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Sys RRS-MOD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders","public_title":null,"options":["Default Title"],"price":5295,"weight":386,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"Sys RRS-MOD","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316","options":["Title"],"media":[{"alt":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders - AlarmSystemStore.com","id":7363175612518,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSystem Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders\u003c\/h2\u003e\nThis is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003e2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)\u003cbr\u003e\u003cbr\u003eOperating Temperature Range\u003cbr\u003e32 F to 131 F (0 C to 55 C)\u003cbr\u003e\u003cbr\u003eWire Connections\u003cbr\u003e18 AWG stranded, tinned, 16 in length\u003cbr\u003e\u003cbr\u003eOperating Humidity Range\u003cbr\u003e5% to 85% non-condensing\u003cbr\u003e\u003cbr\u003eElectrical Specifications\u003cbr\u003e\u003cbr\u003eOperating Voltage\u003cbr\u003eNominal: 12\/24 V\u003cbr\u003eMin: 8.5 V\u003cbr\u003eMax: 35 V\u003cbr\u003e\u003cbr\u003eAverage Operating Current:\u003cbr\u003e25 mA\u003cbr\u003eRelay Contact Rating\u003cbr\u003e2 A @ 35 VDC\u003cbr\u003e\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eIs compatible with 2- and 4-wire i3 detectors equipped with a sounder\u003c\/li\u003e\n\u003cli\u003eActivates all i3 sounders on a loop when one alarms\u003c\/li\u003e\n\u003cli\u003eSynchronizes all i3 sounders on the loop for a clear alarm signal\u003c\/li\u003e\n\u003cli\u003eIs usable with bell\/alarm, alarm relay, or NAC outputs\u003c\/li\u003e\n\u003cli\u003eHas a field-selectable switch to accommodate both coded and continuous alarm signals\u003c\/li\u003e\n\u003cli\u003eAllows i3 detector silencing from the panel or keypad\u003c\/li\u003e\n\u003cli\u003eOperates on 12 and 24 volt systems\u003c\/li\u003e\n\u003cli\u003eSimplifies connections with quick-connect harness and color-coded wires\u003c\/li\u003e\n\u003c\/ul\u003e"}

Hardwired Sensors Detectors

System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders

$52.95

System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders This is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.Dimensions2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)Operating Temperature Range32 F to 131 F (0 C to 55 C)Wire Connections18 AWG stranded, tinned, 16 in lengthOperating Humidity Range5% to 85% non-condensingElectrical SpecificationsOperating VoltageNominal: 12/24 VMin: 8.5 VMax: 35 VAverage Operating Current:25 mARelay Contact Rating2 A @ 35 VDC Is compatible with 2- and 4-wire i3...

System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders This is used to make all of the smoke detector...

{"id":7037378053,"title":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders","handle":"system-sensor-rrs-mod-reversing-relay-smokes","description":"\u003ch2\u003eSystem Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders\u003c\/h2\u003e\nThis is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003e2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)\u003cbr\u003e\u003cbr\u003eOperating Temperature Range\u003cbr\u003e32 F to 131 F (0 C to 55 C)\u003cbr\u003e\u003cbr\u003eWire Connections\u003cbr\u003e18 AWG stranded, tinned, 16 in length\u003cbr\u003e\u003cbr\u003eOperating Humidity Range\u003cbr\u003e5% to 85% non-condensing\u003cbr\u003e\u003cbr\u003eElectrical Specifications\u003cbr\u003e\u003cbr\u003eOperating Voltage\u003cbr\u003eNominal: 12\/24 V\u003cbr\u003eMin: 8.5 V\u003cbr\u003eMax: 35 V\u003cbr\u003e\u003cbr\u003eAverage Operating Current:\u003cbr\u003e25 mA\u003cbr\u003eRelay Contact Rating\u003cbr\u003e2 A @ 35 VDC\u003cbr\u003e\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eIs compatible with 2- and 4-wire i3 detectors equipped with a sounder\u003c\/li\u003e\n\u003cli\u003eActivates all i3 sounders on a loop when one alarms\u003c\/li\u003e\n\u003cli\u003eSynchronizes all i3 sounders on the loop for a clear alarm signal\u003c\/li\u003e\n\u003cli\u003eIs usable with bell\/alarm, alarm relay, or NAC outputs\u003c\/li\u003e\n\u003cli\u003eHas a field-selectable switch to accommodate both coded and continuous alarm signals\u003c\/li\u003e\n\u003cli\u003eAllows i3 detector silencing from the panel or keypad\u003c\/li\u003e\n\u003cli\u003eOperates on 12 and 24 volt systems\u003c\/li\u003e\n\u003cli\u003eSimplifies connections with quick-connect harness and color-coded wires\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2016-10-20T04:30:00-04:00","created_at":"2017-01-23T07:20:11-05:00","vendor":"System Sensor","type":"Smoke Detector Accessories","tags":["Els PW 22611","Hardwired Sensors","RRS-MOD","RRSMOD","Smoke Detector Accessories","Smoke Detectors","System Sensor"],"price":5295,"price_min":5295,"price_max":5295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526618373,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Sys RRS-MOD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders","public_title":null,"options":["Default Title"],"price":5295,"weight":386,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"Sys RRS-MOD","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316","options":["Title"],"media":[{"alt":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders - AlarmSystemStore.com","id":7363175612518,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSystem Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders\u003c\/h2\u003e\nThis is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003e2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)\u003cbr\u003e\u003cbr\u003eOperating Temperature Range\u003cbr\u003e32 F to 131 F (0 C to 55 C)\u003cbr\u003e\u003cbr\u003eWire Connections\u003cbr\u003e18 AWG stranded, tinned, 16 in length\u003cbr\u003e\u003cbr\u003eOperating Humidity Range\u003cbr\u003e5% to 85% non-condensing\u003cbr\u003e\u003cbr\u003eElectrical Specifications\u003cbr\u003e\u003cbr\u003eOperating Voltage\u003cbr\u003eNominal: 12\/24 V\u003cbr\u003eMin: 8.5 V\u003cbr\u003eMax: 35 V\u003cbr\u003e\u003cbr\u003eAverage Operating Current:\u003cbr\u003e25 mA\u003cbr\u003eRelay Contact Rating\u003cbr\u003e2 A @ 35 VDC\u003cbr\u003e\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eIs compatible with 2- and 4-wire i3 detectors equipped with a sounder\u003c\/li\u003e\n\u003cli\u003eActivates all i3 sounders on a loop when one alarms\u003c\/li\u003e\n\u003cli\u003eSynchronizes all i3 sounders on the loop for a clear alarm signal\u003c\/li\u003e\n\u003cli\u003eIs usable with bell\/alarm, alarm relay, or NAC outputs\u003c\/li\u003e\n\u003cli\u003eHas a field-selectable switch to accommodate both coded and continuous alarm signals\u003c\/li\u003e\n\u003cli\u003eAllows i3 detector silencing from the panel or keypad\u003c\/li\u003e\n\u003cli\u003eOperates on 12 and 24 volt systems\u003c\/li\u003e\n\u003cli\u003eSimplifies connections with quick-connect harness and color-coded wires\u003c\/li\u003e\n\u003c\/ul\u003e"}

System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes

{"id":7037378757,"title":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes","handle":"system-sensor-sys-eolr1","description":"\u003ch2\u003eSystem Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes\u003c\/h2\u003e\nModel EOLR-1 is an epoxy encapsulated single pull single throw (SPST) normally open relay that is activated by 9 to 40 VDC. This relay can be used as an end of line device in fire alarm systems, e.g., to supervise power supplies.\u003cbr\u003e\u003cbr\u003eThe System Sensor SYS-EOLR1 Power supervision module is a single pull single throw (SPST) normally open relay that will be activated by voltages between 9 to 40 VDC. You'll basically use this as a power supervision relay. \u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\nOperating Voltage: 9 to 40 VDC ( 9 to 35 Vrms for unfiltered full wave rectified supplies )\u003cbr\u003eOperating Current: 20 mA max.\u003cbr\u003eOperating Temperature Range: 22ºF to 140ºF (30ºC to 60ºC)\u003cbr\u003eHumidity: 10 to 93% RH non-condensing\u003cbr\u003eWire Length: 8″ min. (203 mm)\u003cbr\u003eDimensions: 0.91″H x 1.65″W x 1.22″D\u003cbr\u003e(23 mm H x 42 mm W x 31 mm D)\u003cbr\u003eContact Ratings: 120 VAC 0.5 A max. (resistive load)\u003cbr\u003e30 VDC 3A max. (resistive load)","published_at":"2016-10-20T04:30:00-04:00","created_at":"2017-01-23T07:20:19-05:00","vendor":"System Sensor","type":"Smoke Detector Accessories","tags":["DSC Alarm Systems","EOLR1","Hardwired Sensors","Power Supervision Module","Smoke Detector Accessories","Smoke Detectors","System Sensor"],"price":3395,"price_min":3395,"price_max":3395,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526626437,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SYS-EOLR1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes","public_title":null,"options":["Default Title"],"price":3395,"weight":386,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"SYS-EOLR1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-691710.jpg?v=1595526320","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-978135.jpg?v=1595526320","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-293974.jpg?v=1595526320","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-695527.jpg?v=1595526320"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-691710.jpg?v=1595526320","options":["Title"],"media":[{"alt":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes - AlarmSystemStore.com","id":7363177513062,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-691710.jpg?v=1595526320"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-691710.jpg?v=1595526320","width":1024},{"alt":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes - AlarmSystemStore.com","id":7363177578598,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-978135.jpg?v=1595526320"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-978135.jpg?v=1595526320","width":1024},{"alt":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes - AlarmSystemStore.com","id":7363177644134,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-293974.jpg?v=1595526320"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-293974.jpg?v=1595526320","width":1024},{"alt":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes - AlarmSystemStore.com","id":7363177676902,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-695527.jpg?v=1595526320"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-695527.jpg?v=1595526320","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSystem Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes\u003c\/h2\u003e\nModel EOLR-1 is an epoxy encapsulated single pull single throw (SPST) normally open relay that is activated by 9 to 40 VDC. This relay can be used as an end of line device in fire alarm systems, e.g., to supervise power supplies.\u003cbr\u003e\u003cbr\u003eThe System Sensor SYS-EOLR1 Power supervision module is a single pull single throw (SPST) normally open relay that will be activated by voltages between 9 to 40 VDC. You'll basically use this as a power supervision relay. \u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\nOperating Voltage: 9 to 40 VDC ( 9 to 35 Vrms for unfiltered full wave rectified supplies )\u003cbr\u003eOperating Current: 20 mA max.\u003cbr\u003eOperating Temperature Range: 22ºF to 140ºF (30ºC to 60ºC)\u003cbr\u003eHumidity: 10 to 93% RH non-condensing\u003cbr\u003eWire Length: 8″ min. (203 mm)\u003cbr\u003eDimensions: 0.91″H x 1.65″W x 1.22″D\u003cbr\u003e(23 mm H x 42 mm W x 31 mm D)\u003cbr\u003eContact Ratings: 120 VAC 0.5 A max. (resistive load)\u003cbr\u003e30 VDC 3A max. (resistive load)"}

Hardwired Sensors Detectors

System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes

$33.95

System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes Model EOLR-1 is an epoxy encapsulated single pull single throw (SPST) normally open relay that is activated by 9 to 40 VDC. This relay can be used as an end of line device in fire alarm systems, e.g., to supervise power supplies.The System Sensor SYS-EOLR1 Power supervision module is a single pull single throw (SPST) normally open relay that will be activated by voltages between 9 to 40 VDC. You'll basically use this as a power supervision relay. Specifications Operating Voltage: 9 to 40 VDC ( 9 to 35 Vrms for unfiltered full wave rectified supplies )Operating Current: 20 mA max.Operating Temperature Range: 22ºF to 140ºF (30ºC to 60ºC)Humidity: 10 to 93% RH non-condensingWire Length: 8″ min. (203 mm)Dimensions: 0.91″H x 1.65″W x 1.22″D(23 mm H x 42 mm W x 31 mm D)Contact Ratings: 120 VAC 0.5 A max....

System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes Model EOLR-1 is an epoxy encapsulated single pull single throw...

{"id":7037378757,"title":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes","handle":"system-sensor-sys-eolr1","description":"\u003ch2\u003eSystem Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes\u003c\/h2\u003e\nModel EOLR-1 is an epoxy encapsulated single pull single throw (SPST) normally open relay that is activated by 9 to 40 VDC. This relay can be used as an end of line device in fire alarm systems, e.g., to supervise power supplies.\u003cbr\u003e\u003cbr\u003eThe System Sensor SYS-EOLR1 Power supervision module is a single pull single throw (SPST) normally open relay that will be activated by voltages between 9 to 40 VDC. You'll basically use this as a power supervision relay. \u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\nOperating Voltage: 9 to 40 VDC ( 9 to 35 Vrms for unfiltered full wave rectified supplies )\u003cbr\u003eOperating Current: 20 mA max.\u003cbr\u003eOperating Temperature Range: 22ºF to 140ºF (30ºC to 60ºC)\u003cbr\u003eHumidity: 10 to 93% RH non-condensing\u003cbr\u003eWire Length: 8″ min. (203 mm)\u003cbr\u003eDimensions: 0.91″H x 1.65″W x 1.22″D\u003cbr\u003e(23 mm H x 42 mm W x 31 mm D)\u003cbr\u003eContact Ratings: 120 VAC 0.5 A max. (resistive load)\u003cbr\u003e30 VDC 3A max. (resistive load)","published_at":"2016-10-20T04:30:00-04:00","created_at":"2017-01-23T07:20:19-05:00","vendor":"System Sensor","type":"Smoke Detector Accessories","tags":["DSC Alarm Systems","EOLR1","Hardwired Sensors","Power Supervision Module","Smoke Detector Accessories","Smoke Detectors","System Sensor"],"price":3395,"price_min":3395,"price_max":3395,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526626437,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SYS-EOLR1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes","public_title":null,"options":["Default Title"],"price":3395,"weight":386,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"SYS-EOLR1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-691710.jpg?v=1595526320","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-978135.jpg?v=1595526320","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-293974.jpg?v=1595526320","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-695527.jpg?v=1595526320"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-691710.jpg?v=1595526320","options":["Title"],"media":[{"alt":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes - AlarmSystemStore.com","id":7363177513062,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-691710.jpg?v=1595526320"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-691710.jpg?v=1595526320","width":1024},{"alt":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes - AlarmSystemStore.com","id":7363177578598,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-978135.jpg?v=1595526320"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-978135.jpg?v=1595526320","width":1024},{"alt":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes - AlarmSystemStore.com","id":7363177644134,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-293974.jpg?v=1595526320"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-293974.jpg?v=1595526320","width":1024},{"alt":"System Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes - AlarmSystemStore.com","id":7363177676902,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-695527.jpg?v=1595526320"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-sys-eolr1-power-supervision-module-for-4-wire-smokes-695527.jpg?v=1595526320","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSystem Sensor SYS-EOLR1 Power Supervision Module For 4 Wire Smokes\u003c\/h2\u003e\nModel EOLR-1 is an epoxy encapsulated single pull single throw (SPST) normally open relay that is activated by 9 to 40 VDC. This relay can be used as an end of line device in fire alarm systems, e.g., to supervise power supplies.\u003cbr\u003e\u003cbr\u003eThe System Sensor SYS-EOLR1 Power supervision module is a single pull single throw (SPST) normally open relay that will be activated by voltages between 9 to 40 VDC. You'll basically use this as a power supervision relay. \u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\nOperating Voltage: 9 to 40 VDC ( 9 to 35 Vrms for unfiltered full wave rectified supplies )\u003cbr\u003eOperating Current: 20 mA max.\u003cbr\u003eOperating Temperature Range: 22ºF to 140ºF (30ºC to 60ºC)\u003cbr\u003eHumidity: 10 to 93% RH non-condensing\u003cbr\u003eWire Length: 8″ min. (203 mm)\u003cbr\u003eDimensions: 0.91″H x 1.65″W x 1.22″D\u003cbr\u003e(23 mm H x 42 mm W x 31 mm D)\u003cbr\u003eContact Ratings: 120 VAC 0.5 A max. (resistive load)\u003cbr\u003e30 VDC 3A max. (resistive load)"}

System Sensor CO-REPL Replacement CO cell module

{"id":8977909711168,"title":"System Sensor CO-REPL Replacement CO cell module","handle":"system-sensor-co-repl-replacement-co-cell-module","description":"\u003ch2\u003eSystem Sensor CO-REPL \u003c\/h2\u003e\n\u003cp\u003eThe CO-REPL is a replacement CO cell module for the COSMO smoke and CO combo units. On the underside of the detectors are removable CO cells that wear out sooner than the smoke detector itself. The COSMOD module used with these combo units can alert you if the CO cell is at its end of life, so when that happens you can use this replacement cell module. \u003c\/p\u003e\n\u003cp\u003eWe order these modules weekly or bi-weekly to get the freshest date codes available from the manufacturer.\u003c\/p\u003e","published_at":"2023-12-19T18:02:48-05:00","created_at":"2023-12-19T18:02:48-05:00","vendor":"System Sensor","type":"Smoke Detector Accessories","tags":[],"price":4295,"price_min":4295,"price_max":4295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47517668933952,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Sys CO-REPL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"System Sensor CO-REPL Replacement CO cell module","public_title":null,"options":["Default Title"],"price":4295,"weight":227,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"continue","barcode":"Sys CO-REPL","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-604804.jpg?v=1709737444","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-313853.jpg?v=1709737444","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-443544.jpg?v=1709737444"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-604804.jpg?v=1709737444","options":["Title"],"media":[{"alt":"System Sensor CO-REPL Replacement CO cell module - AlarmSystemStore.com","id":36485480284480,"position":1,"preview_image":{"aspect_ratio":1.0,"height":876,"width":876,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-604804.jpg?v=1709737444"},"aspect_ratio":1.0,"height":876,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-604804.jpg?v=1709737444","width":876},{"alt":"System Sensor CO-REPL Replacement CO cell module - AlarmSystemStore.com","id":36485480317248,"position":2,"preview_image":{"aspect_ratio":1.0,"height":721,"width":721,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-313853.jpg?v=1709737444"},"aspect_ratio":1.0,"height":721,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-313853.jpg?v=1709737444","width":721},{"alt":"System Sensor CO-REPL Replacement CO cell module - AlarmSystemStore.com","id":36485480382784,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-443544.jpg?v=1709737444"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-443544.jpg?v=1709737444","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSystem Sensor CO-REPL \u003c\/h2\u003e\n\u003cp\u003eThe CO-REPL is a replacement CO cell module for the COSMO smoke and CO combo units. On the underside of the detectors are removable CO cells that wear out sooner than the smoke detector itself. The COSMOD module used with these combo units can alert you if the CO cell is at its end of life, so when that happens you can use this replacement cell module. \u003c\/p\u003e\n\u003cp\u003eWe order these modules weekly or bi-weekly to get the freshest date codes available from the manufacturer.\u003c\/p\u003e"}

Four Wire Type Smoke Detectors System Sensor DSC

System Sensor CO-REPL Replacement CO cell module

$42.95

System Sensor CO-REPL The CO-REPL is a replacement CO cell module for the COSMO smoke and CO combo units. On the underside of the detectors are removable CO cells that wear out sooner than the smoke detector itself. The COSMOD module used with these combo units can alert you if the CO cell is at its end of life, so when that happens you can use this replacement cell module. We order these modules weekly or bi-weekly to get the freshest date codes available from the manufacturer.

System Sensor CO-REPL The CO-REPL is a replacement CO cell module for the COSMO smoke and CO combo units. On...

{"id":8977909711168,"title":"System Sensor CO-REPL Replacement CO cell module","handle":"system-sensor-co-repl-replacement-co-cell-module","description":"\u003ch2\u003eSystem Sensor CO-REPL \u003c\/h2\u003e\n\u003cp\u003eThe CO-REPL is a replacement CO cell module for the COSMO smoke and CO combo units. On the underside of the detectors are removable CO cells that wear out sooner than the smoke detector itself. The COSMOD module used with these combo units can alert you if the CO cell is at its end of life, so when that happens you can use this replacement cell module. \u003c\/p\u003e\n\u003cp\u003eWe order these modules weekly or bi-weekly to get the freshest date codes available from the manufacturer.\u003c\/p\u003e","published_at":"2023-12-19T18:02:48-05:00","created_at":"2023-12-19T18:02:48-05:00","vendor":"System Sensor","type":"Smoke Detector Accessories","tags":[],"price":4295,"price_min":4295,"price_max":4295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47517668933952,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Sys CO-REPL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"System Sensor CO-REPL Replacement CO cell module","public_title":null,"options":["Default Title"],"price":4295,"weight":227,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"continue","barcode":"Sys CO-REPL","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-604804.jpg?v=1709737444","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-313853.jpg?v=1709737444","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-443544.jpg?v=1709737444"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-604804.jpg?v=1709737444","options":["Title"],"media":[{"alt":"System Sensor CO-REPL Replacement CO cell module - AlarmSystemStore.com","id":36485480284480,"position":1,"preview_image":{"aspect_ratio":1.0,"height":876,"width":876,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-604804.jpg?v=1709737444"},"aspect_ratio":1.0,"height":876,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-604804.jpg?v=1709737444","width":876},{"alt":"System Sensor CO-REPL Replacement CO cell module - AlarmSystemStore.com","id":36485480317248,"position":2,"preview_image":{"aspect_ratio":1.0,"height":721,"width":721,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-313853.jpg?v=1709737444"},"aspect_ratio":1.0,"height":721,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-313853.jpg?v=1709737444","width":721},{"alt":"System Sensor CO-REPL Replacement CO cell module - AlarmSystemStore.com","id":36485480382784,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-443544.jpg?v=1709737444"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-co-repl-replacement-co-cell-module-443544.jpg?v=1709737444","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSystem Sensor CO-REPL \u003c\/h2\u003e\n\u003cp\u003eThe CO-REPL is a replacement CO cell module for the COSMO smoke and CO combo units. On the underside of the detectors are removable CO cells that wear out sooner than the smoke detector itself. The COSMOD module used with these combo units can alert you if the CO cell is at its end of life, so when that happens you can use this replacement cell module. \u003c\/p\u003e\n\u003cp\u003eWe order these modules weekly or bi-weekly to get the freshest date codes available from the manufacturer.\u003c\/p\u003e"}

Smoke Detector Tester SmokeSabre

$15.95

Quick Overview

Smoke Detector Tester SmokeSabre

QUESTIONS & ANSWERS

Have a Question?

Alarm System Store

My Account

Customer Service

Policies