BBB Business Review ADC-SWV100 Smart Water Valve


Quick Overview
In Stock
Add to Wishlist ADC-SWV100 Smart Water Valve

What you get:

  • ADC-SWV100 Control Unit
  • Brass valve
  • Actuator
  • Mounting plate
  • Drywall anchors & screws (x2)
  • Cable ties (x3)
  • Power adapter
  • User guide

The SWV100 Smart Water Valve is a Z-Wave water control mechanism that helps you control water flow whether you at home or away by using the Interactive with Automation service. This valve will allow you to open it and close it remotely using your app. You can also set a scene for the valve to automatically close when used in conjunction with a water/flood sensor or based on armed status if you wish. 

You'll install this valve in line with the water supply line coming into your home. You'll then connect the control unit to the valve and enroll it in your Z-Wave network. The unit is powered from a 100-240 VAC (50/60 Hz) power source. The valve measures 1 inch in diameter and has female NPT threading.

The control unit measures 2.75 x 4.0 x 1.25” and has a 19.7 ft power supply cable. The valve and actuator measure in 2.0 x 4.5 x 3.75”. These are great for folks who have Z-Wave control capability and who travel and would like to have some added peace of mind. 

ADC-SWV100 Installation

ADC-SWV100 Data sheet



Ask a Question
  • My water pipe is 3/4 inch. Is this device compatible?

    The ADC-SWV100 is a 1 inch valve, so with some modification to your current pipe you could make it work for shutting of your water flow. However, I would not recommend using the ADC-SWM150 with the included water flow meters as your smaller pipe may throw off the readings of the sensors.