Honeywell IPCAM-PT Camera Compact Pan & Tilt IP for Total Connect The Honeywell IPCAM-PT Camera Compact Pan & Tilt is an IP camera that is used to monitor your home visually from a remote location. This camera can only be used with Honeywell Total Connect Video service and it does require a monthly fee. This is a great camera to have in your home and because of its pan & tilt features you can scan the area that you put the camera in. This camera also works very well in the dark because of it's five LED lights.

The IPCAM-PT also features auto white balance, auto glare control, sharpness, and brightness controls. The pan feature allows you to scan 150 degrees left and 150 degrees right. You also have a 53 degree range of sight. The tilt feature lets you move the camera up 90 degrees and down 30 degrees, also with the 53 degree range of sight. The camera can use three different methods of encryption. It uses WEP 64 Bits/128 Bits, WPA/WPA2 Personal, and WPS. The IPCAM-PT also features a privacy button so that if others in the household have access to the cameras you can disable a certain camera so that they will not be able to view them.

This gives you the piece of mind to know that no one outside of those you give access to can view you cameras. I am sure that most of you have seen the recent news footage of the dangers of regular wireless cameras and outsiders ability to view them just by having a receiver. This is not a worry with these little beauties! This camera also has a microphone built-in so not only can you see what's going on in the house while you're away; you can hear what's going on as well. Weighing in at a mere 1.5 lbs. this camera has some hefty features. A nice addition for your home security needs.

Leave a comment

Comments have to be approved before showing up

Latest Blogs

Carbon monoxide has no color, no smell, and no taste. A leaking furnace, malfunctioning water heater, attached garage, or gas appliance can fill a home with it before anyone recognizes what's happening. By the time symptoms appear — dizziness, confusion, nausea — occupants may already be too impaired to respond...
A standalone smoke alarm does one thing: make noise inside the home when it detects smoke. If no one is there to hear it — or if the alarm goes off while your family is asleep upstairs and the detector is in the basement — that single point of alert...
If you've been trying to sign up for Alarm.com service on Alarm.com's own website and hit a dead end, you're not alone. The site doesn't have a checkout page. No "get started" button leads to a subscription. That's not a design flaw — it reflects how the platform is built....