AlarmSystemStore.com BBB Business Review
Home / Products / DSC PowerSeries PG9984P PowerG 915Mhz Wireless Dual Tech Motion Detector w/ Pet Immunity
Buy With Confidence Seal, AlarmSystemStore

DSC PowerSeries PG9984P PowerG 915Mhz Wireless Dual Tech Motion Detector w/ Pet Immunity

$104.95 $127.99

Quick Overview

The PG9984P is the highest quality PowerG motion sensor, featuring dual-band PIR and microwave motion detection, giving you double the false alarm protection at up to 33ft. It also includes True motion detection as well as an 88lbs pet immunity limit.

In Stock
Add to Wishlist

DSC PowerSeries PG9984P PowerG 915Mhz Wireless Dual Tech Motion Detector w/ Pet Immunity

The PG9984P is a Dual Band motion detector that will detect movement on the PIR spectrum and includes K-band microwave detection as well as a backup so that you get the best in detection without the normal false alarms that you might experience with a regular PIR motion detector.  

This motion detector also uses temperature compensation technology that will adjust the sensitivity settings automatically so that it can tell the actual human body temperature from the surrounding area where it is located. That means that if the room temperature closely matches that of the human body; the detector will still be able to distinguish. The PG9984P also features a handy LED indicator light that will allow for optimum placement without having to check back at your keypad.

Specifications:

Dimensions 115 x 60 x 48mm (4.5 x 2.3 x 1.1in)
Battery Life for 5 years (typical use)
Battery Type 3V CR123A Lithium Battery
Weight 90g (3oz)
Operating Temperature -10°C to 55°C (14°F to 131°F)

DSC PG9984P Installation manual
DSC PG9984P Specifications sheet

QUESTIONS & ANSWERS

Ask a Question

  • Hi - I would like to install a motion detector in a room that is approximately 23' x 18'. There are 4 ceiling mounted heating/cooling vents in this room. If I mount a DSC PowerSeries PG9984P PowerG 915Mhz Wireless Dual Tech Motion Detector w/ Pet Immunity in the corner 4' away and about 1' down the wall from the nearest ceiling vent, will I be OK for false motion detection because of a heating/cooling changes to the room temp? Thanks, Andy

    Yes, you should be fine. The PG9984P is a dual-tech motion sensor, so it has both an infrared detector as well as a microwave detector that both have to trigger to trip the unit. The PG9984P is the ideal model for your situation. 

Features

Visible link quality indicator on the device
Vandal-resistant design
Dual Technology PIR and K-Band Microwave frequency to reduce false alarms
Anti-disguise mode to prevent intentional circumvention of the detector

Related Products

DSC PG9936 PowerG Wireless Smoke and Heat Detector
  • {"id":1694794678374,"title":"DSC PG9936 PowerG Wireless Smoke and Heat Detector","handle":"dsc-pg9936-powerg-wireless-smoke-and-heat-detector","description":"\u003cp class=\"product-excerpt\"\u003eThe PG9936 is a standard wireless smoke and heat detector with a 135-degree heat limit. This model also features a built-in sounder in the event that the siren cannot be heard. Both the smoke and heat must be active at all times.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eDSC PG9936 PowerG Wireless Smoke and Heat Detector\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9936 is a wireless PowerG smoke and heat detector that can be used with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo\" title=\"DSC PowerSeries NEO\"\u003eDSC PowerSeries NEO\u003c\/a\u003e systems as well as the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/qolsys-iq-panel-4\" title=\"Qolsys IQ Panel 2 Plus\"\u003eQolsys IQ Panel 4\u003c\/a\u003e systems. \u003c\/p\u003e\n\u003cp\u003eThe PG9936 works on the 915 MHz frequency, can be mounted on a wall or ceiling, and comes with the hardware to do so. Just like every PowerG device; the PG9936 features multi-channel frequency hopping to help prevent frequency blocking and interference. It also uses 128-bit AES encryption to provide protection against analysis tools and digital attacks. Another preventive measure this contains is a back tamper in case someone tries to remove it from its mounting position. The PG9936 uses 3 AAA batteries for power which will last an average of 3 years and measures in at 5 x 2.5 in. \u003c\/p\u003e\n\u003cp\u003eThis smoke\/heat detector makes installation easier because of the built-in link quality indicator located on the device itself. To help ensure everyone in the area is notified of a fire; the PG9936 features an onboard sounder and a visual indicator. The unit will also send device tampered and low battery conditions to the main alarm. Because of the technology behind the PG9936; this will provide reliable monitoring and early detection of fire conditions. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PGX936_Installation_Guide_29010011R006_EN_FR_ES_IT_PT.pdf?v=1727207458\" target=\"_blank\" title=\"PG9936 installation guide\" rel=\"noopener\"\u003ePG9936 Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDimensions - 125 x 63mm (5 x 2.5in)\u003cbr\u003eBattery Life - 3 years (typical use)\u003cbr\u003eBattery Type - 3 AAA batteries (included)\u003cbr\u003eWeight - 243g (8.75oz)\u003cbr\u003eOperating Temperature - 4.4°C to 37.8°C (40°F to 100°F)\u003cbr\u003eOperating Environment - Indoors\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2019-03-29T16:11:13-04:00","created_at":"2019-03-29T10:58:54-04:00","vendor":"DSC","type":"DSC PowerSeries NEO Power G Wireless","tags":["9936","DSC PG9936","DSC PowerSeries NEO","DSC PowerSeries NEO Power G Wireless","PG9936"],"price":11995,"price_min":11995,"price_max":11995,"available":true,"price_varies":false,"compare_at_price":13499,"compare_at_price_min":13499,"compare_at_price_max":13499,"compare_at_price_varies":false,"variants":[{"id":16270379122790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-PG9936","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC PG9936 PowerG Wireless Smoke and Heat Detector","public_title":null,"options":["Default Title"],"price":11995,"weight":680,"compare_at_price":13499,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-PG9936","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-348789.jpg?v=1595526019","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-519965.jpg?v=1595526019","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-777253.jpg?v=1595526019","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-245889.jpg?v=1723597843","\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-859460.webp?v=1723665125"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-348789.jpg?v=1595526019","options":["Title"],"media":[{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":7363089006694,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-348789.jpg?v=1595526019"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-348789.jpg?v=1595526019","width":1024},{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":7363089039462,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-519965.jpg?v=1595526019"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-519965.jpg?v=1595526019","width":1024},{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":7363089072230,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-777253.jpg?v=1595526019"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-777253.jpg?v=1595526019","width":1024},{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":7363089137766,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-245889.jpg?v=1723597843"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-245889.jpg?v=1723597843","width":1024},{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":37988944412992,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-859460.webp?v=1723665125"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-859460.webp?v=1723665125","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"product-excerpt\"\u003eThe PG9936 is a standard wireless smoke and heat detector with a 135-degree heat limit. This model also features a built-in sounder in the event that the siren cannot be heard. Both the smoke and heat must be active at all times.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eDSC PG9936 PowerG Wireless Smoke and Heat Detector\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9936 is a wireless PowerG smoke and heat detector that can be used with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo\" title=\"DSC PowerSeries NEO\"\u003eDSC PowerSeries NEO\u003c\/a\u003e systems as well as the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/qolsys-iq-panel-4\" title=\"Qolsys IQ Panel 2 Plus\"\u003eQolsys IQ Panel 4\u003c\/a\u003e systems. \u003c\/p\u003e\n\u003cp\u003eThe PG9936 works on the 915 MHz frequency, can be mounted on a wall or ceiling, and comes with the hardware to do so. Just like every PowerG device; the PG9936 features multi-channel frequency hopping to help prevent frequency blocking and interference. It also uses 128-bit AES encryption to provide protection against analysis tools and digital attacks. Another preventive measure this contains is a back tamper in case someone tries to remove it from its mounting position. The PG9936 uses 3 AAA batteries for power which will last an average of 3 years and measures in at 5 x 2.5 in. \u003c\/p\u003e\n\u003cp\u003eThis smoke\/heat detector makes installation easier because of the built-in link quality indicator located on the device itself. To help ensure everyone in the area is notified of a fire; the PG9936 features an onboard sounder and a visual indicator. The unit will also send device tampered and low battery conditions to the main alarm. Because of the technology behind the PG9936; this will provide reliable monitoring and early detection of fire conditions. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PGX936_Installation_Guide_29010011R006_EN_FR_ES_IT_PT.pdf?v=1727207458\" target=\"_blank\" title=\"PG9936 installation guide\" rel=\"noopener\"\u003ePG9936 Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDimensions - 125 x 63mm (5 x 2.5in)\u003cbr\u003eBattery Life - 3 years (typical use)\u003cbr\u003eBattery Type - 3 AAA batteries (included)\u003cbr\u003eWeight - 243g (8.75oz)\u003cbr\u003eOperating Temperature - 4.4°C to 37.8°C (40°F to 100°F)\u003cbr\u003eOperating Environment - Indoors\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
DSC Power G NEO Wireless Motion - Glassbreak & Fire Detectors
DSC PG9936 PowerG Wireless Smoke and Heat Detector
$119.95 $134.99
The PG9936 is a standard wireless smoke and heat detector with a 135-degree heat limit. This model also features a built-in sounder in the event that the siren cannot be heard. Both the smoke and heat must be active at all times. DSC PG9936 PowerG Wireless Smoke and Heat Detector The DSC PG9936 is a wireless PowerG smoke and heat detector that can be used with the DSC PowerSeries NEO systems as well as the Qolsys IQ Panel 4 systems.  The PG9936 works on the 915 MHz frequency, can be mounted on a wall or ceiling, and comes with the hardware to do so. Just like every PowerG device; the PG9936 features multi-channel frequency hopping to help prevent frequency blocking and interference. It also uses 128-bit AES encryption to provide protection against analysis tools and digital attacks. Another preventive measure this contains is a back tamper in case someone tries to remove...
The PG9936 is a standard wireless smoke and heat detector with a 135-degree heat limit. This model also features a...
  • {"id":1694794678374,"title":"DSC PG9936 PowerG Wireless Smoke and Heat Detector","handle":"dsc-pg9936-powerg-wireless-smoke-and-heat-detector","description":"\u003cp class=\"product-excerpt\"\u003eThe PG9936 is a standard wireless smoke and heat detector with a 135-degree heat limit. This model also features a built-in sounder in the event that the siren cannot be heard. Both the smoke and heat must be active at all times.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eDSC PG9936 PowerG Wireless Smoke and Heat Detector\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9936 is a wireless PowerG smoke and heat detector that can be used with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo\" title=\"DSC PowerSeries NEO\"\u003eDSC PowerSeries NEO\u003c\/a\u003e systems as well as the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/qolsys-iq-panel-4\" title=\"Qolsys IQ Panel 2 Plus\"\u003eQolsys IQ Panel 4\u003c\/a\u003e systems. \u003c\/p\u003e\n\u003cp\u003eThe PG9936 works on the 915 MHz frequency, can be mounted on a wall or ceiling, and comes with the hardware to do so. Just like every PowerG device; the PG9936 features multi-channel frequency hopping to help prevent frequency blocking and interference. It also uses 128-bit AES encryption to provide protection against analysis tools and digital attacks. Another preventive measure this contains is a back tamper in case someone tries to remove it from its mounting position. The PG9936 uses 3 AAA batteries for power which will last an average of 3 years and measures in at 5 x 2.5 in. \u003c\/p\u003e\n\u003cp\u003eThis smoke\/heat detector makes installation easier because of the built-in link quality indicator located on the device itself. To help ensure everyone in the area is notified of a fire; the PG9936 features an onboard sounder and a visual indicator. The unit will also send device tampered and low battery conditions to the main alarm. Because of the technology behind the PG9936; this will provide reliable monitoring and early detection of fire conditions. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PGX936_Installation_Guide_29010011R006_EN_FR_ES_IT_PT.pdf?v=1727207458\" target=\"_blank\" title=\"PG9936 installation guide\" rel=\"noopener\"\u003ePG9936 Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDimensions - 125 x 63mm (5 x 2.5in)\u003cbr\u003eBattery Life - 3 years (typical use)\u003cbr\u003eBattery Type - 3 AAA batteries (included)\u003cbr\u003eWeight - 243g (8.75oz)\u003cbr\u003eOperating Temperature - 4.4°C to 37.8°C (40°F to 100°F)\u003cbr\u003eOperating Environment - Indoors\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2019-03-29T16:11:13-04:00","created_at":"2019-03-29T10:58:54-04:00","vendor":"DSC","type":"DSC PowerSeries NEO Power G Wireless","tags":["9936","DSC PG9936","DSC PowerSeries NEO","DSC PowerSeries NEO Power G Wireless","PG9936"],"price":11995,"price_min":11995,"price_max":11995,"available":true,"price_varies":false,"compare_at_price":13499,"compare_at_price_min":13499,"compare_at_price_max":13499,"compare_at_price_varies":false,"variants":[{"id":16270379122790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-PG9936","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC PG9936 PowerG Wireless Smoke and Heat Detector","public_title":null,"options":["Default Title"],"price":11995,"weight":680,"compare_at_price":13499,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-PG9936","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-348789.jpg?v=1595526019","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-519965.jpg?v=1595526019","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-777253.jpg?v=1595526019","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-245889.jpg?v=1723597843","\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-859460.webp?v=1723665125"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-348789.jpg?v=1595526019","options":["Title"],"media":[{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":7363089006694,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-348789.jpg?v=1595526019"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-348789.jpg?v=1595526019","width":1024},{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":7363089039462,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-519965.jpg?v=1595526019"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-519965.jpg?v=1595526019","width":1024},{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":7363089072230,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-777253.jpg?v=1595526019"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-777253.jpg?v=1595526019","width":1024},{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":7363089137766,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-245889.jpg?v=1723597843"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-245889.jpg?v=1723597843","width":1024},{"alt":"DSC PG9936 PowerG Wireless Smoke and Heat Detector - AlarmSystemStore.com","id":37988944412992,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-859460.webp?v=1723665125"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/files\/dsc-pg9936-powerg-wireless-smoke-and-heat-detector-859460.webp?v=1723665125","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"product-excerpt\"\u003eThe PG9936 is a standard wireless smoke and heat detector with a 135-degree heat limit. This model also features a built-in sounder in the event that the siren cannot be heard. Both the smoke and heat must be active at all times.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eDSC PG9936 PowerG Wireless Smoke and Heat Detector\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9936 is a wireless PowerG smoke and heat detector that can be used with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo\" title=\"DSC PowerSeries NEO\"\u003eDSC PowerSeries NEO\u003c\/a\u003e systems as well as the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/qolsys-iq-panel-4\" title=\"Qolsys IQ Panel 2 Plus\"\u003eQolsys IQ Panel 4\u003c\/a\u003e systems. \u003c\/p\u003e\n\u003cp\u003eThe PG9936 works on the 915 MHz frequency, can be mounted on a wall or ceiling, and comes with the hardware to do so. Just like every PowerG device; the PG9936 features multi-channel frequency hopping to help prevent frequency blocking and interference. It also uses 128-bit AES encryption to provide protection against analysis tools and digital attacks. Another preventive measure this contains is a back tamper in case someone tries to remove it from its mounting position. The PG9936 uses 3 AAA batteries for power which will last an average of 3 years and measures in at 5 x 2.5 in. \u003c\/p\u003e\n\u003cp\u003eThis smoke\/heat detector makes installation easier because of the built-in link quality indicator located on the device itself. To help ensure everyone in the area is notified of a fire; the PG9936 features an onboard sounder and a visual indicator. The unit will also send device tampered and low battery conditions to the main alarm. Because of the technology behind the PG9936; this will provide reliable monitoring and early detection of fire conditions. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PGX936_Installation_Guide_29010011R006_EN_FR_ES_IT_PT.pdf?v=1727207458\" target=\"_blank\" title=\"PG9936 installation guide\" rel=\"noopener\"\u003ePG9936 Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDimensions - 125 x 63mm (5 x 2.5in)\u003cbr\u003eBattery Life - 3 years (typical use)\u003cbr\u003eBattery Type - 3 AAA batteries (included)\u003cbr\u003eWeight - 243g (8.75oz)\u003cbr\u003eOperating Temperature - 4.4°C to 37.8°C (40°F to 100°F)\u003cbr\u003eOperating Environment - Indoors\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector
  • {"id":1683186712678,"title":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector","handle":"dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector","description":"\u003cp class=\"product-excerpt\"\u003e4The PG9933 is a very effective tool to keep you safe from a very dangerous gas. If you have any products in your home that operate on gas, having a Carbon monoxide sensor is a must. The recommended replacement period is 5 years, as the sensor loses sensitivity after that time frame.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eDSC PG9933 PowerG Wireless Carbon Monoxide CO Detector\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9933 is a wireless carbon monoxide detector for use with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo\" title=\"DSC PowerSeries NEO\"\u003eDSC PowerSeries NEO\u003c\/a\u003e and \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/qolsys-iq-panel-4\" title=\"Qolsys IQ Panel 2 Plus\"\u003eQolsys IQ Panel 4\u003c\/a\u003e systems. Using the new PowerG technology; the PG9933 is a perfect solution if your home or business has any appliance that uses natural gas. This helps with the early detection of dangerous carbon monoxide gas leaks.\u003c\/p\u003e\n\u003cp\u003eThe PG9933 measures in at 4.9 x 1.8in and use \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/cr123-lithium-3-volt-battery\" title=\"CR123 Lithium Battery\"\u003eCR123\u003c\/a\u003e Lithium batteries for power. The battery lifespan on these units is a typical 5 years before they'll need to be replaced. The CO detector weighs in at 7 oz. and it can easily be installed in any space you need detection for CO gas without having to run wires back to the main control panel. The PG9933 features an advanced electrochemical sensor and features an on-board siren and LED indicator that will warn those in the area before dangerous gas levels are reached. It will also send an alarm\/trouble signal to the main control panel as well where status can be read on a keypad and possibly send notifications to users to alert them if the system has that capability added. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9933-Carbon-Monoxide-Detector_29010012R001.pdf?v=1683149286\" title=\"PG9933 Installation manual\" target=\"_blank\"\u003eInstallation Manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PowerG-Wireless-Carbon-Monoxide-Detector_PG9933_Data-Sheet_a4_en.pdf?v=1683149285\" title=\"PG9933 Data Sheet\" target=\"_blank\"\u003eData Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEarly warning of carbon monoxide (CO) poisoning danger\u003cbr\u003eVisual and Audible alarm indications upon CO detection\u003cbr\u003eBuilt-in 95db Alarm Buzzer and large flashing LED alarm\u003cbr\u003eVisible and transmitted low battery indication\u003c\/p\u003e\n\u003ch3\u003eSpecifications: \u003c\/h3\u003e\n\u003cp\u003eDimensions - 125.3 x 48mm (4.9 x 1.8in)\u003cbr\u003eBattery Life - 5 years (typical use)\u003cbr\u003eBattery Type - One CR123A lithium battery (included)\u003cbr\u003eWeight - 197gr (7oz)\u003cbr\u003eOperating Temperature - 4.4°C to 37.8°C (40°F to 100°F)\u003cbr\u003eOperating Environment - Indoors\u003c\/p\u003e","published_at":"2019-07-05T13:03:36-04:00","created_at":"2019-03-14T10:33:19-04:00","vendor":"DSC","type":"DSC PowerSeries NEO Power G Wireless","tags":["DSC PowerSeries NEO","DSC PowerSeries NEO Power G Wireless"],"price":11499,"price_min":11499,"price_max":11499,"available":true,"price_varies":false,"compare_at_price":13600,"compare_at_price_min":13600,"compare_at_price_max":13600,"compare_at_price_varies":false,"variants":[{"id":16224412106854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-PG9933","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector","public_title":null,"options":["Default Title"],"price":11499,"weight":907,"compare_at_price":13600,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-PG9933","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-336874.jpg?v=1595526016","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-364552.jpg?v=1595526016","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-210173.jpg?v=1595526016","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-396996.jpg?v=1595526016"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-336874.jpg?v=1595526016","options":["Title"],"media":[{"alt":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector - AlarmSystemStore.com","id":7363087761510,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-336874.jpg?v=1595526016"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-336874.jpg?v=1595526016","width":1024},{"alt":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector - AlarmSystemStore.com","id":7363087794278,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-364552.jpg?v=1595526016"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-364552.jpg?v=1595526016","width":1024},{"alt":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector - AlarmSystemStore.com","id":7363087827046,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-210173.jpg?v=1595526016"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-210173.jpg?v=1595526016","width":1024},{"alt":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector - AlarmSystemStore.com","id":7363087859814,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-396996.jpg?v=1595526016"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-396996.jpg?v=1595526016","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"product-excerpt\"\u003e4The PG9933 is a very effective tool to keep you safe from a very dangerous gas. If you have any products in your home that operate on gas, having a Carbon monoxide sensor is a must. The recommended replacement period is 5 years, as the sensor loses sensitivity after that time frame.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eDSC PG9933 PowerG Wireless Carbon Monoxide CO Detector\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9933 is a wireless carbon monoxide detector for use with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo\" title=\"DSC PowerSeries NEO\"\u003eDSC PowerSeries NEO\u003c\/a\u003e and \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/qolsys-iq-panel-4\" title=\"Qolsys IQ Panel 2 Plus\"\u003eQolsys IQ Panel 4\u003c\/a\u003e systems. Using the new PowerG technology; the PG9933 is a perfect solution if your home or business has any appliance that uses natural gas. This helps with the early detection of dangerous carbon monoxide gas leaks.\u003c\/p\u003e\n\u003cp\u003eThe PG9933 measures in at 4.9 x 1.8in and use \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/cr123-lithium-3-volt-battery\" title=\"CR123 Lithium Battery\"\u003eCR123\u003c\/a\u003e Lithium batteries for power. The battery lifespan on these units is a typical 5 years before they'll need to be replaced. The CO detector weighs in at 7 oz. and it can easily be installed in any space you need detection for CO gas without having to run wires back to the main control panel. The PG9933 features an advanced electrochemical sensor and features an on-board siren and LED indicator that will warn those in the area before dangerous gas levels are reached. It will also send an alarm\/trouble signal to the main control panel as well where status can be read on a keypad and possibly send notifications to users to alert them if the system has that capability added. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9933-Carbon-Monoxide-Detector_29010012R001.pdf?v=1683149286\" title=\"PG9933 Installation manual\" target=\"_blank\"\u003eInstallation Manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PowerG-Wireless-Carbon-Monoxide-Detector_PG9933_Data-Sheet_a4_en.pdf?v=1683149285\" title=\"PG9933 Data Sheet\" target=\"_blank\"\u003eData Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEarly warning of carbon monoxide (CO) poisoning danger\u003cbr\u003eVisual and Audible alarm indications upon CO detection\u003cbr\u003eBuilt-in 95db Alarm Buzzer and large flashing LED alarm\u003cbr\u003eVisible and transmitted low battery indication\u003c\/p\u003e\n\u003ch3\u003eSpecifications: \u003c\/h3\u003e\n\u003cp\u003eDimensions - 125.3 x 48mm (4.9 x 1.8in)\u003cbr\u003eBattery Life - 5 years (typical use)\u003cbr\u003eBattery Type - One CR123A lithium battery (included)\u003cbr\u003eWeight - 197gr (7oz)\u003cbr\u003eOperating Temperature - 4.4°C to 37.8°C (40°F to 100°F)\u003cbr\u003eOperating Environment - Indoors\u003c\/p\u003e"}
DSC Power G NEO Wireless Motion - Glassbreak & Fire Detectors
DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector
$114.99 $136.00
4The PG9933 is a very effective tool to keep you safe from a very dangerous gas. If you have any products in your home that operate on gas, having a Carbon monoxide sensor is a must. The recommended replacement period is 5 years, as the sensor loses sensitivity after that time frame. DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector The DSC PG9933 is a wireless carbon monoxide detector for use with the DSC PowerSeries NEO and Qolsys IQ Panel 4 systems. Using the new PowerG technology; the PG9933 is a perfect solution if your home or business has any appliance that uses natural gas. This helps with the early detection of dangerous carbon monoxide gas leaks. The PG9933 measures in at 4.9 x 1.8in and use CR123 Lithium batteries for power. The battery lifespan on these units is a typical 5 years before they'll need to be replaced. The CO detector...
4The PG9933 is a very effective tool to keep you safe from a very dangerous gas. If you have any...
  • {"id":1683186712678,"title":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector","handle":"dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector","description":"\u003cp class=\"product-excerpt\"\u003e4The PG9933 is a very effective tool to keep you safe from a very dangerous gas. If you have any products in your home that operate on gas, having a Carbon monoxide sensor is a must. The recommended replacement period is 5 years, as the sensor loses sensitivity after that time frame.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eDSC PG9933 PowerG Wireless Carbon Monoxide CO Detector\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9933 is a wireless carbon monoxide detector for use with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo\" title=\"DSC PowerSeries NEO\"\u003eDSC PowerSeries NEO\u003c\/a\u003e and \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/qolsys-iq-panel-4\" title=\"Qolsys IQ Panel 2 Plus\"\u003eQolsys IQ Panel 4\u003c\/a\u003e systems. Using the new PowerG technology; the PG9933 is a perfect solution if your home or business has any appliance that uses natural gas. This helps with the early detection of dangerous carbon monoxide gas leaks.\u003c\/p\u003e\n\u003cp\u003eThe PG9933 measures in at 4.9 x 1.8in and use \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/cr123-lithium-3-volt-battery\" title=\"CR123 Lithium Battery\"\u003eCR123\u003c\/a\u003e Lithium batteries for power. The battery lifespan on these units is a typical 5 years before they'll need to be replaced. The CO detector weighs in at 7 oz. and it can easily be installed in any space you need detection for CO gas without having to run wires back to the main control panel. The PG9933 features an advanced electrochemical sensor and features an on-board siren and LED indicator that will warn those in the area before dangerous gas levels are reached. It will also send an alarm\/trouble signal to the main control panel as well where status can be read on a keypad and possibly send notifications to users to alert them if the system has that capability added. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9933-Carbon-Monoxide-Detector_29010012R001.pdf?v=1683149286\" title=\"PG9933 Installation manual\" target=\"_blank\"\u003eInstallation Manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PowerG-Wireless-Carbon-Monoxide-Detector_PG9933_Data-Sheet_a4_en.pdf?v=1683149285\" title=\"PG9933 Data Sheet\" target=\"_blank\"\u003eData Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEarly warning of carbon monoxide (CO) poisoning danger\u003cbr\u003eVisual and Audible alarm indications upon CO detection\u003cbr\u003eBuilt-in 95db Alarm Buzzer and large flashing LED alarm\u003cbr\u003eVisible and transmitted low battery indication\u003c\/p\u003e\n\u003ch3\u003eSpecifications: \u003c\/h3\u003e\n\u003cp\u003eDimensions - 125.3 x 48mm (4.9 x 1.8in)\u003cbr\u003eBattery Life - 5 years (typical use)\u003cbr\u003eBattery Type - One CR123A lithium battery (included)\u003cbr\u003eWeight - 197gr (7oz)\u003cbr\u003eOperating Temperature - 4.4°C to 37.8°C (40°F to 100°F)\u003cbr\u003eOperating Environment - Indoors\u003c\/p\u003e","published_at":"2019-07-05T13:03:36-04:00","created_at":"2019-03-14T10:33:19-04:00","vendor":"DSC","type":"DSC PowerSeries NEO Power G Wireless","tags":["DSC PowerSeries NEO","DSC PowerSeries NEO Power G Wireless"],"price":11499,"price_min":11499,"price_max":11499,"available":true,"price_varies":false,"compare_at_price":13600,"compare_at_price_min":13600,"compare_at_price_max":13600,"compare_at_price_varies":false,"variants":[{"id":16224412106854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-PG9933","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector","public_title":null,"options":["Default Title"],"price":11499,"weight":907,"compare_at_price":13600,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-PG9933","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-336874.jpg?v=1595526016","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-364552.jpg?v=1595526016","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-210173.jpg?v=1595526016","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-396996.jpg?v=1595526016"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-336874.jpg?v=1595526016","options":["Title"],"media":[{"alt":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector - AlarmSystemStore.com","id":7363087761510,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-336874.jpg?v=1595526016"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-336874.jpg?v=1595526016","width":1024},{"alt":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector - AlarmSystemStore.com","id":7363087794278,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-364552.jpg?v=1595526016"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-364552.jpg?v=1595526016","width":1024},{"alt":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector - AlarmSystemStore.com","id":7363087827046,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-210173.jpg?v=1595526016"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-210173.jpg?v=1595526016","width":1024},{"alt":"DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector - AlarmSystemStore.com","id":7363087859814,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-396996.jpg?v=1595526016"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-pg9933-powerg-wireless-carbon-monoxide-co-detector-396996.jpg?v=1595526016","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"product-excerpt\"\u003e4The PG9933 is a very effective tool to keep you safe from a very dangerous gas. If you have any products in your home that operate on gas, having a Carbon monoxide sensor is a must. The recommended replacement period is 5 years, as the sensor loses sensitivity after that time frame.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eDSC PG9933 PowerG Wireless Carbon Monoxide CO Detector\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9933 is a wireless carbon monoxide detector for use with the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo\" title=\"DSC PowerSeries NEO\"\u003eDSC PowerSeries NEO\u003c\/a\u003e and \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/qolsys-iq-panel-4\" title=\"Qolsys IQ Panel 2 Plus\"\u003eQolsys IQ Panel 4\u003c\/a\u003e systems. Using the new PowerG technology; the PG9933 is a perfect solution if your home or business has any appliance that uses natural gas. This helps with the early detection of dangerous carbon monoxide gas leaks.\u003c\/p\u003e\n\u003cp\u003eThe PG9933 measures in at 4.9 x 1.8in and use \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/cr123-lithium-3-volt-battery\" title=\"CR123 Lithium Battery\"\u003eCR123\u003c\/a\u003e Lithium batteries for power. The battery lifespan on these units is a typical 5 years before they'll need to be replaced. The CO detector weighs in at 7 oz. and it can easily be installed in any space you need detection for CO gas without having to run wires back to the main control panel. The PG9933 features an advanced electrochemical sensor and features an on-board siren and LED indicator that will warn those in the area before dangerous gas levels are reached. It will also send an alarm\/trouble signal to the main control panel as well where status can be read on a keypad and possibly send notifications to users to alert them if the system has that capability added. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9933-Carbon-Monoxide-Detector_29010012R001.pdf?v=1683149286\" title=\"PG9933 Installation manual\" target=\"_blank\"\u003eInstallation Manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PowerG-Wireless-Carbon-Monoxide-Detector_PG9933_Data-Sheet_a4_en.pdf?v=1683149285\" title=\"PG9933 Data Sheet\" target=\"_blank\"\u003eData Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEarly warning of carbon monoxide (CO) poisoning danger\u003cbr\u003eVisual and Audible alarm indications upon CO detection\u003cbr\u003eBuilt-in 95db Alarm Buzzer and large flashing LED alarm\u003cbr\u003eVisible and transmitted low battery indication\u003c\/p\u003e\n\u003ch3\u003eSpecifications: \u003c\/h3\u003e\n\u003cp\u003eDimensions - 125.3 x 48mm (4.9 x 1.8in)\u003cbr\u003eBattery Life - 5 years (typical use)\u003cbr\u003eBattery Type - One CR123A lithium battery (included)\u003cbr\u003eWeight - 197gr (7oz)\u003cbr\u003eOperating Temperature - 4.4°C to 37.8°C (40°F to 100°F)\u003cbr\u003eOperating Environment - Indoors\u003c\/p\u003e"}
DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector
  • {"id":7037347461,"title":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector","handle":"dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector","description":"\u003cp class=\"product-excerpt\"\u003eThe PG9922 is a wireless PowerG glass break sensor with a reliable 20ft of range. In most cases, the range can reach up to 25-30ft, but 20ft is recommended. The PG9922 is effective for covering multiple windows in a room so you do not need individual shock sensors on your windows.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9922 is a 2-way wireless glass break detector that will set off a burglary condition in your NEO security panel if the sound of breaking glass is picked up by the sensor. This is also supervised and checks in with the panel occasionally to let the system know that all is well. This also features a tamper switch to prevent a thief from tampering with it causing an alarm condition.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003eDimensions 80x108x43mm (3.1x4.2x1.7in)\u003cbr\u003eBattery Life for 4 years (typical use)\u003cbr\u003eBattery Type 3V CR123A Lithium battery\u003cbr\u003eWeight (including battery) 130g (4.6oz)\u003cbr\u003eOperating Temperature -10°C to 55°C (14°F to 131°F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922_PG8922_PG4922_Installation_Guide_29010635R002_EN_FR_ES_PT.pdf?v=1727206657\" target=\"_blank\" title=\"DSC PG9922 Installation manual\" rel=\"noopener\"\u003eDSC PG9922 Installation manual\u003c\/a\u003e\u003ca title=\"DSC PG9922 Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922-PG8922-PG4922_IN_en-fr-sp-po_001.pdf?936225371175540919\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003ca title=\"DSC PG9922 Specifications sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922_Wireless_Glass-Break_Spec_en.pdf?936225371175540919\" target=\"_blank\"\u003eDSC PG9922 Specifications sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eGlass break detection of plate, tempered, laminated and wired glass\u003cbr\u003eDetection range up to 20ft (6m)\u003cbr\u003eVisible link quality indication is shown on the device\u003cbr\u003eAcoustic Pattern Recognition Technology provides 360° coverage\u003cbr\u003eVisible and transmitted low battery indication\u003c\/p\u003e","published_at":"2016-10-20T03:44:00-04:00","created_at":"2017-01-23T07:14:43-05:00","vendor":"DSC","type":"DSC PowerSeries NEO Power G Wireless","tags":["9922","DSC PowerSeries NEO","DSC PowerSeries NEO Power G Wireless","DSC wireless glassbreak","glass break","glassbreak","Neo wireless glassbreak","PG 9922","PG9922"],"price":11495,"price_min":11495,"price_max":11495,"available":true,"price_varies":false,"compare_at_price":13699,"compare_at_price_min":13699,"compare_at_price_max":13699,"compare_at_price_varies":false,"variants":[{"id":24526381893,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-PG9922","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector","public_title":null,"options":["Default Title"],"price":11495,"weight":340,"compare_at_price":13699,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-PG9922","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-592002.jpg?v=1595526010","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-162438.jpg?v=1595526010","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-853089.jpg?v=1595526010","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-480625.jpg?v=1595526010","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-838790.jpg?v=1595526010"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-592002.jpg?v=1595526010","options":["Title"],"media":[{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084025958,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-592002.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-592002.jpg?v=1595526010","width":1024},{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084058726,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-162438.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-162438.jpg?v=1595526010","width":1024},{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084157030,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-853089.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-853089.jpg?v=1595526010","width":1024},{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084222566,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-480625.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-480625.jpg?v=1595526010","width":1024},{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084288102,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-838790.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-838790.jpg?v=1595526010","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"product-excerpt\"\u003eThe PG9922 is a wireless PowerG glass break sensor with a reliable 20ft of range. In most cases, the range can reach up to 25-30ft, but 20ft is recommended. The PG9922 is effective for covering multiple windows in a room so you do not need individual shock sensors on your windows.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9922 is a 2-way wireless glass break detector that will set off a burglary condition in your NEO security panel if the sound of breaking glass is picked up by the sensor. This is also supervised and checks in with the panel occasionally to let the system know that all is well. This also features a tamper switch to prevent a thief from tampering with it causing an alarm condition.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003eDimensions 80x108x43mm (3.1x4.2x1.7in)\u003cbr\u003eBattery Life for 4 years (typical use)\u003cbr\u003eBattery Type 3V CR123A Lithium battery\u003cbr\u003eWeight (including battery) 130g (4.6oz)\u003cbr\u003eOperating Temperature -10°C to 55°C (14°F to 131°F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922_PG8922_PG4922_Installation_Guide_29010635R002_EN_FR_ES_PT.pdf?v=1727206657\" target=\"_blank\" title=\"DSC PG9922 Installation manual\" rel=\"noopener\"\u003eDSC PG9922 Installation manual\u003c\/a\u003e\u003ca title=\"DSC PG9922 Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922-PG8922-PG4922_IN_en-fr-sp-po_001.pdf?936225371175540919\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003ca title=\"DSC PG9922 Specifications sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922_Wireless_Glass-Break_Spec_en.pdf?936225371175540919\" target=\"_blank\"\u003eDSC PG9922 Specifications sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eGlass break detection of plate, tempered, laminated and wired glass\u003cbr\u003eDetection range up to 20ft (6m)\u003cbr\u003eVisible link quality indication is shown on the device\u003cbr\u003eAcoustic Pattern Recognition Technology provides 360° coverage\u003cbr\u003eVisible and transmitted low battery indication\u003c\/p\u003e"}
DSC Power G NEO Wireless Motion - Glassbreak & Fire Detectors
DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector
$114.95 $136.99
The PG9922 is a wireless PowerG glass break sensor with a reliable 20ft of range. In most cases, the range can reach up to 25-30ft, but 20ft is recommended. The PG9922 is effective for covering multiple windows in a room so you do not need individual shock sensors on your windows. DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector The DSC PG9922 is a 2-way wireless glass break detector that will set off a burglary condition in your NEO security panel if the sound of breaking glass is picked up by the sensor. This is also supervised and checks in with the panel occasionally to let the system know that all is well. This also features a tamper switch to prevent a thief from tampering with it causing an alarm condition.   Specifications: Dimensions 80x108x43mm (3.1x4.2x1.7in)Battery Life for 4 years (typical use)Battery Type 3V CR123A Lithium batteryWeight (including battery) 130g...
The PG9922 is a wireless PowerG glass break sensor with a reliable 20ft of range. In most cases, the range...
  • {"id":7037347461,"title":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector","handle":"dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector","description":"\u003cp class=\"product-excerpt\"\u003eThe PG9922 is a wireless PowerG glass break sensor with a reliable 20ft of range. In most cases, the range can reach up to 25-30ft, but 20ft is recommended. The PG9922 is effective for covering multiple windows in a room so you do not need individual shock sensors on your windows.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9922 is a 2-way wireless glass break detector that will set off a burglary condition in your NEO security panel if the sound of breaking glass is picked up by the sensor. This is also supervised and checks in with the panel occasionally to let the system know that all is well. This also features a tamper switch to prevent a thief from tampering with it causing an alarm condition.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003eDimensions 80x108x43mm (3.1x4.2x1.7in)\u003cbr\u003eBattery Life for 4 years (typical use)\u003cbr\u003eBattery Type 3V CR123A Lithium battery\u003cbr\u003eWeight (including battery) 130g (4.6oz)\u003cbr\u003eOperating Temperature -10°C to 55°C (14°F to 131°F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922_PG8922_PG4922_Installation_Guide_29010635R002_EN_FR_ES_PT.pdf?v=1727206657\" target=\"_blank\" title=\"DSC PG9922 Installation manual\" rel=\"noopener\"\u003eDSC PG9922 Installation manual\u003c\/a\u003e\u003ca title=\"DSC PG9922 Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922-PG8922-PG4922_IN_en-fr-sp-po_001.pdf?936225371175540919\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003ca title=\"DSC PG9922 Specifications sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922_Wireless_Glass-Break_Spec_en.pdf?936225371175540919\" target=\"_blank\"\u003eDSC PG9922 Specifications sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eGlass break detection of plate, tempered, laminated and wired glass\u003cbr\u003eDetection range up to 20ft (6m)\u003cbr\u003eVisible link quality indication is shown on the device\u003cbr\u003eAcoustic Pattern Recognition Technology provides 360° coverage\u003cbr\u003eVisible and transmitted low battery indication\u003c\/p\u003e","published_at":"2016-10-20T03:44:00-04:00","created_at":"2017-01-23T07:14:43-05:00","vendor":"DSC","type":"DSC PowerSeries NEO Power G Wireless","tags":["9922","DSC PowerSeries NEO","DSC PowerSeries NEO Power G Wireless","DSC wireless glassbreak","glass break","glassbreak","Neo wireless glassbreak","PG 9922","PG9922"],"price":11495,"price_min":11495,"price_max":11495,"available":true,"price_varies":false,"compare_at_price":13699,"compare_at_price_min":13699,"compare_at_price_max":13699,"compare_at_price_varies":false,"variants":[{"id":24526381893,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DSC-PG9922","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector","public_title":null,"options":["Default Title"],"price":11495,"weight":340,"compare_at_price":13699,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DSC-PG9922","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-592002.jpg?v=1595526010","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-162438.jpg?v=1595526010","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-853089.jpg?v=1595526010","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-480625.jpg?v=1595526010","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-838790.jpg?v=1595526010"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-592002.jpg?v=1595526010","options":["Title"],"media":[{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084025958,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-592002.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-592002.jpg?v=1595526010","width":1024},{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084058726,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-162438.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-162438.jpg?v=1595526010","width":1024},{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084157030,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-853089.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-853089.jpg?v=1595526010","width":1024},{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084222566,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-480625.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-480625.jpg?v=1595526010","width":1024},{"alt":"DSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector - AlarmSystemStore.com","id":7363084288102,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-838790.jpg?v=1595526010"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/dsc-powerseries-pg9922-powerg-915mhz-wireless-glass-break-detector-838790.jpg?v=1595526010","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"product-excerpt\"\u003eThe PG9922 is a wireless PowerG glass break sensor with a reliable 20ft of range. In most cases, the range can reach up to 25-30ft, but 20ft is recommended. The PG9922 is effective for covering multiple windows in a room so you do not need individual shock sensors on your windows.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDSC PowerSeries PG9922 PowerG 915Mhz Wireless Glass Break Detector\u003c\/h2\u003e\n\u003cp\u003eThe DSC PG9922 is a 2-way wireless glass break detector that will set off a burglary condition in your NEO security panel if the sound of breaking glass is picked up by the sensor. This is also supervised and checks in with the panel occasionally to let the system know that all is well. This also features a tamper switch to prevent a thief from tampering with it causing an alarm condition.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003eDimensions 80x108x43mm (3.1x4.2x1.7in)\u003cbr\u003eBattery Life for 4 years (typical use)\u003cbr\u003eBattery Type 3V CR123A Lithium battery\u003cbr\u003eWeight (including battery) 130g (4.6oz)\u003cbr\u003eOperating Temperature -10°C to 55°C (14°F to 131°F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922_PG8922_PG4922_Installation_Guide_29010635R002_EN_FR_ES_PT.pdf?v=1727206657\" target=\"_blank\" title=\"DSC PG9922 Installation manual\" rel=\"noopener\"\u003eDSC PG9922 Installation manual\u003c\/a\u003e\u003ca title=\"DSC PG9922 Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922-PG8922-PG4922_IN_en-fr-sp-po_001.pdf?936225371175540919\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003ca title=\"DSC PG9922 Specifications sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/PG9922_Wireless_Glass-Break_Spec_en.pdf?936225371175540919\" target=\"_blank\"\u003eDSC PG9922 Specifications sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eGlass break detection of plate, tempered, laminated and wired glass\u003cbr\u003eDetection range up to 20ft (6m)\u003cbr\u003eVisible link quality indication is shown on the device\u003cbr\u003eAcoustic Pattern Recognition Technology provides 360° coverage\u003cbr\u003eVisible and transmitted low battery indication\u003c\/p\u003e"}