DSC PowerSeries PG9984P PowerG 915Mhz Wireless Dual Tech Motion Detector w/ Pet Immunity The PG9984P is a Dual Band motion detector that will detect movement on the PIR spectrum and includes K-band microwave detection as well as a backup so that you get the best in detection without the normal false alarms that you might experience with a regular PIR motion detector.  This motion detector also uses temperature compensation technology that will adjust the sensitivity settings automatically so that it can tell the actual human body temperature from the surrounding area where it is located. That means that if the room temperature closely matches that of the human body; the detector will still be able to distinguish. The PG9984P also features the handy LED indicator light that will allow for optimum placement without having to check back at your keypad. Specifications: Dimensions 115 x 60 x 48mm (4.5 x 2.3 x...

DSC PG9936 PowerG Wireless Smoke and Heat Detector The DSC PG9936 is a wireless PowerG smoke and heat detector that can be used with the DSC PowerSeries NEO systems as well as the Qolsys IQ Panel 2 Plus systems.  The PG9936 works on the 915 MHz frequency, can be mounted on a wall or ceiling and comes with the hardware to do so. Just as every PowerG device; the PG9936 features multi-channel frequency hopping to help prevent frequency blocking and interference. It also uses 128 bit AES encryption to provide protection against analysis tools and digital attacks. Another preventive measure this contains is a back tamper in case someone tries to remove it from its mounting position. The PG9936 uses 3 AAA batteries for power which will last an average of 3 years and measures in at 5 x 2.5 in.  This smoke/heat detector makes installation easier because of the built-in...

DSC PG9914 Wireless PowerG Digital Pet-Immune PIR Motion Detector - *Latest firmware* There are a couple firmware version of this motion floating around. This affects compatibility with some systems. The version we offer here is the latest version with full PowerG compatibility. The DSC PG9914 wireless PowerG motion detector is a wireless motion detector for use with any DSC system that uses PowerG wireless such as their Iotega and PowerSeries Neo alarm systems. It is a dual-purpose detector because it not only monitors for movement events but also features a built-in temperature sensor as well. The PG9914 can send the room temperature readout to the DSC NEO so that it reads out on a compatible keypad.  The PG9914 features Fresnel and cylindrical lenses which provide superb motion detection and help cut down the instances of false alarms. The sensor will detect movement up to a 39' range if mounted in the...