Selling direct
to DIY since 1997!
AlarmSystemStore.com BBB Business Review

How do I fix a module tamper on a DSC NEO?

<Back

If one of your modules (HSM2108, HSM2204, HSM2208, or HSM2300) is causing a tamper condition, this means that there is an open tamper circuit on it. This is often an overlooked part of the initial setup. If you are not using a tamper switch with the module you will need to put a wire from the TAM terminal to the BLK terminal to close the loop. If you are using a tamper switch that indicates that someone has opened the cabinet that the module is in or the tamper switch is malfunctioning.