AlarmSystemStore.com BBB Business Review
Home / Water, Temperature & Humidity Sensors / Sump pump alarm float switch CS1829C/O
Buy With Confidence Seal, AlarmSystemStore

Sump pump alarm float switch CS1829C/O

$26.95

Quick Overview
In Stock
Add to Wishlist

Sump pump alarm float switch CS1829C/O

This sump pump alarm float switch is for use with alarm systems to provide a warning if the water rises too high in the your pump basket / bucket indicating a possible failure in the pump. This is a non powered mechanical device with both a normally open and normally closed magnetic switch.

Specifications:

Overall height............4 1/2"
Overall width............3 "
Total width in alarm...3 9/16"
Width of base............3/4 "
Top of base holds standard 3/8 press fit contact.
Swing-arm top has 1/4 " magnet encased in rust resistant coating.
Swing-arm bottom has inverted air-lock float.
Shipped with an eleven inch tie-wrap for mounting on vertical flow pipe in sump well.

QUESTIONS & ANSWERS

Ask a Question

  • How many inches above the “normal” water level should the round float be? I imagine the switch won’t activate the alarm until it floats high enough to lose the magnetic contact. Is there a spec on how many inches the round float needs to travel for the magnets cause switch activation? Thinking of getting one of these for my honeywell system.

    There is no spec for that, but it's not much. Once water hits the float it moves the magnet from the switch pretty quickly. My estimation would be a couple inches or less would trigger the contact.

  • We have the CS2029 alarm float - it has the magnet in the top position.

    Yes it does.

Related Products

GRI 2600 12 Volt DC Water Sensor
  • {"id":7037358853,"title":"GRI 2600 12 Volt DC Water Sensor","handle":"gri-2600-12-volt-dc-water-sensor","description":"\u003ch2\u003eGRI 2600 12 Volt DC Water Sensor\u003c\/h2\u003e\n\u003cdiv\u003eThis GRI 2600 Water Sensor is ideal for anyone who has a hardwired system and lives in an area where flooding is a problem. Thousands of dollars of damage occurs each year because of flooding and now you can have a warning when this starts to happen.\u003cbr\u003e\u003cbr\u003eThis water-sensing contact can be set to detect a water level of as small as 1\/16 of an inch. You will mount this to the wall near the floor so that when water, or any conductive non-flammable liquid, will bridge the contacts and trip the zone.\u003cbr\u003e\u003cbr\u003eWill Detect Any Conductive Non-Flammable Liquid\u003cbr\u003eIdeal Anywhere Water Damage Could Occur\u003cbr\u003eAutomatic Reset\u003cbr\u003e6-Foot Jacketed Lead Standard\u003c\/div\u003e","published_at":"2017-01-09T02:27:00-05:00","created_at":"2017-01-23T07:16:39-05:00","vendor":"AlarmSystemStore.com","type":"Water, Temperature \u0026 Humidity Sensors","tags":["Hardwired Sensors","Temperature \u0026 Humidity Sensors","Water"],"price":2599,"price_min":2599,"price_max":2599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526462405,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GRI-2600","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GRI 2600 12 Volt DC Water Sensor","public_title":null,"options":["Default Title"],"price":2599,"weight":113,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"GRI-2600","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-123215.jpg?v=1595526215","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-511186.jpg?v=1595526215"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-123215.jpg?v=1595526215","options":["Title"],"media":[{"alt":"GRI 2600 12 Volt DC Water Sensor - AlarmSystemStore.com","id":7363150381158,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-123215.jpg?v=1595526215"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-123215.jpg?v=1595526215","width":1024},{"alt":"GRI 2600 12 Volt DC Water Sensor - AlarmSystemStore.com","id":7363150413926,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-511186.jpg?v=1595526215"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-511186.jpg?v=1595526215","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eGRI 2600 12 Volt DC Water Sensor\u003c\/h2\u003e\n\u003cdiv\u003eThis GRI 2600 Water Sensor is ideal for anyone who has a hardwired system and lives in an area where flooding is a problem. Thousands of dollars of damage occurs each year because of flooding and now you can have a warning when this starts to happen.\u003cbr\u003e\u003cbr\u003eThis water-sensing contact can be set to detect a water level of as small as 1\/16 of an inch. You will mount this to the wall near the floor so that when water, or any conductive non-flammable liquid, will bridge the contacts and trip the zone.\u003cbr\u003e\u003cbr\u003eWill Detect Any Conductive Non-Flammable Liquid\u003cbr\u003eIdeal Anywhere Water Damage Could Occur\u003cbr\u003eAutomatic Reset\u003cbr\u003e6-Foot Jacketed Lead Standard\u003c\/div\u003e"}
Hardwired Sensors Detectors
GRI 2600 12 Volt DC Water Sensor
$25.99
GRI 2600 12 Volt DC Water Sensor This GRI 2600 Water Sensor is ideal for anyone who has a hardwired system and lives in an area where flooding is a problem. Thousands of dollars of damage occurs each year because of flooding and now you can have a warning when this starts to happen.This water-sensing contact can be set to detect a water level of as small as 1/16 of an inch. You will mount this to the wall near the floor so that when water, or any conductive non-flammable liquid, will bridge the contacts and trip the zone.Will Detect Any Conductive Non-Flammable LiquidIdeal Anywhere Water Damage Could OccurAutomatic Reset6-Foot Jacketed Lead Standard
GRI 2600 12 Volt DC Water Sensor This GRI 2600 Water Sensor is ideal for anyone who has a hardwired...
  • {"id":7037358853,"title":"GRI 2600 12 Volt DC Water Sensor","handle":"gri-2600-12-volt-dc-water-sensor","description":"\u003ch2\u003eGRI 2600 12 Volt DC Water Sensor\u003c\/h2\u003e\n\u003cdiv\u003eThis GRI 2600 Water Sensor is ideal for anyone who has a hardwired system and lives in an area where flooding is a problem. Thousands of dollars of damage occurs each year because of flooding and now you can have a warning when this starts to happen.\u003cbr\u003e\u003cbr\u003eThis water-sensing contact can be set to detect a water level of as small as 1\/16 of an inch. You will mount this to the wall near the floor so that when water, or any conductive non-flammable liquid, will bridge the contacts and trip the zone.\u003cbr\u003e\u003cbr\u003eWill Detect Any Conductive Non-Flammable Liquid\u003cbr\u003eIdeal Anywhere Water Damage Could Occur\u003cbr\u003eAutomatic Reset\u003cbr\u003e6-Foot Jacketed Lead Standard\u003c\/div\u003e","published_at":"2017-01-09T02:27:00-05:00","created_at":"2017-01-23T07:16:39-05:00","vendor":"AlarmSystemStore.com","type":"Water, Temperature \u0026 Humidity Sensors","tags":["Hardwired Sensors","Temperature \u0026 Humidity Sensors","Water"],"price":2599,"price_min":2599,"price_max":2599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526462405,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GRI-2600","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GRI 2600 12 Volt DC Water Sensor","public_title":null,"options":["Default Title"],"price":2599,"weight":113,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"GRI-2600","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-123215.jpg?v=1595526215","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-511186.jpg?v=1595526215"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-123215.jpg?v=1595526215","options":["Title"],"media":[{"alt":"GRI 2600 12 Volt DC Water Sensor - AlarmSystemStore.com","id":7363150381158,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-123215.jpg?v=1595526215"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-123215.jpg?v=1595526215","width":1024},{"alt":"GRI 2600 12 Volt DC Water Sensor - AlarmSystemStore.com","id":7363150413926,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-511186.jpg?v=1595526215"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/gri-2600-12-volt-dc-water-sensor-511186.jpg?v=1595526215","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eGRI 2600 12 Volt DC Water Sensor\u003c\/h2\u003e\n\u003cdiv\u003eThis GRI 2600 Water Sensor is ideal for anyone who has a hardwired system and lives in an area where flooding is a problem. Thousands of dollars of damage occurs each year because of flooding and now you can have a warning when this starts to happen.\u003cbr\u003e\u003cbr\u003eThis water-sensing contact can be set to detect a water level of as small as 1\/16 of an inch. You will mount this to the wall near the floor so that when water, or any conductive non-flammable liquid, will bridge the contacts and trip the zone.\u003cbr\u003e\u003cbr\u003eWill Detect Any Conductive Non-Flammable Liquid\u003cbr\u003eIdeal Anywhere Water Damage Could Occur\u003cbr\u003eAutomatic Reset\u003cbr\u003e6-Foot Jacketed Lead Standard\u003c\/div\u003e"}
Tane WS-1 Water Sensor
  • {"id":4448423510118,"title":"Tane WS-1 Water Sensor","handle":"tane-ws-1-water-sensor","description":"\u003ch2\u003eTane WS-1  Water Sensor\u003c\/h2\u003e\n\u003cp\u003eThe WS-1 from TANE Alarm is an inexpensive flood \/ water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1\/2″ L × 1\/2″ W × 1\/2″ H. It is an open circuit and when water bridges the to probes it closes the loop. \u003c\/p\u003e\n\u003cp\u003eThe WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.\u003c\/p\u003e","published_at":"2020-01-06T13:56:53-05:00","created_at":"2019-12-31T09:47:53-05:00","vendor":"Tane","type":"Water, Temperature \u0026 Humidity Sensors","tags":["Hardwired Sensors","TANE WS-1","Temperature \u0026 Humidity Sensors","Water","WS-1","WS1"],"price":995,"price_min":995,"price_max":995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31263137136742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Tane WS-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tane WS-1 Water Sensor","public_title":null,"options":["Default Title"],"price":995,"weight":113,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"Tane WS-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","options":["Title"],"media":[{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173711974,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","width":1024},{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173744742,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309","width":1024},{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173777510,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eTane WS-1  Water Sensor\u003c\/h2\u003e\n\u003cp\u003eThe WS-1 from TANE Alarm is an inexpensive flood \/ water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1\/2″ L × 1\/2″ W × 1\/2″ H. It is an open circuit and when water bridges the to probes it closes the loop. \u003c\/p\u003e\n\u003cp\u003eThe WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.\u003c\/p\u003e"}
Hardwired Sensors Detectors
Tane WS-1 Water Sensor
$9.95
Tane WS-1  Water Sensor The WS-1 from TANE Alarm is an inexpensive flood / water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1/2″ L × 1/2″ W × 1/2″ H. It is an open circuit and when water bridges the to probes it closes the loop.  The WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.
Tane WS-1  Water Sensor The WS-1 from TANE Alarm is an inexpensive flood / water sensor that can be used...
  • {"id":4448423510118,"title":"Tane WS-1 Water Sensor","handle":"tane-ws-1-water-sensor","description":"\u003ch2\u003eTane WS-1  Water Sensor\u003c\/h2\u003e\n\u003cp\u003eThe WS-1 from TANE Alarm is an inexpensive flood \/ water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1\/2″ L × 1\/2″ W × 1\/2″ H. It is an open circuit and when water bridges the to probes it closes the loop. \u003c\/p\u003e\n\u003cp\u003eThe WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.\u003c\/p\u003e","published_at":"2020-01-06T13:56:53-05:00","created_at":"2019-12-31T09:47:53-05:00","vendor":"Tane","type":"Water, Temperature \u0026 Humidity Sensors","tags":["Hardwired Sensors","TANE WS-1","Temperature \u0026 Humidity Sensors","Water","WS-1","WS1"],"price":995,"price_min":995,"price_max":995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31263137136742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Tane WS-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tane WS-1 Water Sensor","public_title":null,"options":["Default Title"],"price":995,"weight":113,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"Tane WS-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","options":["Title"],"media":[{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173711974,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","width":1024},{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173744742,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309","width":1024},{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173777510,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eTane WS-1  Water Sensor\u003c\/h2\u003e\n\u003cp\u003eThe WS-1 from TANE Alarm is an inexpensive flood \/ water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1\/2″ L × 1\/2″ W × 1\/2″ H. It is an open circuit and when water bridges the to probes it closes the loop. \u003c\/p\u003e\n\u003cp\u003eThe WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.\u003c\/p\u003e"}