AlarmSystemStore.com BBB Business Review
Home / Water, Temperature & Humidity Sensors / GRI 2600 12 Volt DC Water Sensor
Buy With Confidence Seal, AlarmSystemStore

GRI 2600 12 Volt DC Water Sensor

$25.99

Quick Overview
In Stock
Add to Wishlist

GRI 2600 12 Volt DC Water Sensor

This GRI 2600 Water Sensor is ideal for anyone who has a hardwired system and lives in an area where flooding is a problem. Thousands of dollars of damage occurs each year because of flooding and now you can have a warning when this starts to happen.

This water-sensing contact can be set to detect a water level of as small as 1/16 of an inch. You will mount this to the wall near the floor so that when water, or any conductive non-flammable liquid, will bridge the contacts and trip the zone.

Will Detect Any Conductive Non-Flammable Liquid
Ideal Anywhere Water Damage Could Occur
Automatic Reset
6-Foot Jacketed Lead Standard

QUESTIONS & ANSWERS

Ask a Question

  • On the GRI 2600. Once it's been activated, how do you clear or reset it so it doesn't show as an open zone on the alarm? Thank You

    The GRI 2600 are designed to return to their standby state once the contacts are no longer shorted.  

  • This is an open contact, correct? How do I program this with a DSC pc1830, pk5500 keypad programmed in section 013 for closed contacts that do not EOL resistors.

    Since it is NO, you'll need to change the EOL settings of that zone. You can individually set each zone as EOL resistored or NC on the PowerSeries. Other than that you would just set it up as normal. 

Related Products

Sump pump alarm float switch CS1829C/O
  • {"id":7037328965,"title":"Sump pump alarm float switch CS1829C\/O","handle":"sump-pump-alarm-float-switch","description":"\u003ch2\u003eSump pump alarm float switch CS1829C\/O\u003c\/h2\u003e\nThis sump pump alarm float switch is for use with alarm systems to provide a warning if the water rises too high in the your pump basket \/ bucket indicating a possible failure in the pump. This is a non powered mechanical device with both a normally open and normally closed magnetic switch. \u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\nOverall height............4 1\/2\"\u003cbr\u003e Overall width............3 \" \u003cbr\u003eTotal width in alarm...3 9\/16\" \u003cbr\u003eWidth of base............3\/4 \" \u003cbr\u003eTop of base holds standard 3\/8 press fit contact. \u003cbr\u003eSwing-arm top has 1\/4 \" magnet encased in rust resistant coating. \u003cbr\u003eSwing-arm bottom has inverted air-lock float. \u003cbr\u003eShipped with an eleven inch tie-wrap for mounting on vertical flow pipe in sump well.","published_at":"2016-10-20T02:44:00-04:00","created_at":"2017-01-23T07:11:51-05:00","vendor":"AlarmSystemStore.com","type":"Water, Temperature \u0026 Humidity Sensors","tags":["Hardwired Sensors","Temperature \u0026 Humidity Sensors","Water"],"price":2695,"price_min":2695,"price_max":2695,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526244229,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CS1829C\/O","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sump pump alarm float switch CS1829C\/O","public_title":null,"options":["Default Title"],"price":2695,"weight":227,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"CS1829C\/O","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-332186.jpg?v=1595526310","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-493120.jpg?v=1595526310"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-332186.jpg?v=1595526310","options":["Title"],"media":[{"alt":"Sump pump alarm float switch CS1829C\/O - AlarmSystemStore.com","id":7363173810278,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-332186.jpg?v=1595526310"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-332186.jpg?v=1595526310","width":1024},{"alt":"Sump pump alarm float switch CS1829C\/O - AlarmSystemStore.com","id":7363173843046,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-493120.jpg?v=1595526310"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-493120.jpg?v=1595526310","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSump pump alarm float switch CS1829C\/O\u003c\/h2\u003e\nThis sump pump alarm float switch is for use with alarm systems to provide a warning if the water rises too high in the your pump basket \/ bucket indicating a possible failure in the pump. This is a non powered mechanical device with both a normally open and normally closed magnetic switch. \u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\nOverall height............4 1\/2\"\u003cbr\u003e Overall width............3 \" \u003cbr\u003eTotal width in alarm...3 9\/16\" \u003cbr\u003eWidth of base............3\/4 \" \u003cbr\u003eTop of base holds standard 3\/8 press fit contact. \u003cbr\u003eSwing-arm top has 1\/4 \" magnet encased in rust resistant coating. \u003cbr\u003eSwing-arm bottom has inverted air-lock float. \u003cbr\u003eShipped with an eleven inch tie-wrap for mounting on vertical flow pipe in sump well."}
Hardwired Sensors Detectors
Sump pump alarm float switch CS1829C/O
$26.95
Sump pump alarm float switch CS1829C/O This sump pump alarm float switch is for use with alarm systems to provide a warning if the water rises too high in the your pump basket / bucket indicating a possible failure in the pump. This is a non powered mechanical device with both a normally open and normally closed magnetic switch. Specifications: Overall height............4 1/2" Overall width............3 " Total width in alarm...3 9/16" Width of base............3/4 " Top of base holds standard 3/8 press fit contact. Swing-arm top has 1/4 " magnet encased in rust resistant coating. Swing-arm bottom has inverted air-lock float. Shipped with an eleven inch tie-wrap for mounting on vertical flow pipe in sump well.
Sump pump alarm float switch CS1829C/O This sump pump alarm float switch is for use with alarm systems to provide...
  • {"id":7037328965,"title":"Sump pump alarm float switch CS1829C\/O","handle":"sump-pump-alarm-float-switch","description":"\u003ch2\u003eSump pump alarm float switch CS1829C\/O\u003c\/h2\u003e\nThis sump pump alarm float switch is for use with alarm systems to provide a warning if the water rises too high in the your pump basket \/ bucket indicating a possible failure in the pump. This is a non powered mechanical device with both a normally open and normally closed magnetic switch. \u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\nOverall height............4 1\/2\"\u003cbr\u003e Overall width............3 \" \u003cbr\u003eTotal width in alarm...3 9\/16\" \u003cbr\u003eWidth of base............3\/4 \" \u003cbr\u003eTop of base holds standard 3\/8 press fit contact. \u003cbr\u003eSwing-arm top has 1\/4 \" magnet encased in rust resistant coating. \u003cbr\u003eSwing-arm bottom has inverted air-lock float. \u003cbr\u003eShipped with an eleven inch tie-wrap for mounting on vertical flow pipe in sump well.","published_at":"2016-10-20T02:44:00-04:00","created_at":"2017-01-23T07:11:51-05:00","vendor":"AlarmSystemStore.com","type":"Water, Temperature \u0026 Humidity Sensors","tags":["Hardwired Sensors","Temperature \u0026 Humidity Sensors","Water"],"price":2695,"price_min":2695,"price_max":2695,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526244229,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CS1829C\/O","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sump pump alarm float switch CS1829C\/O","public_title":null,"options":["Default Title"],"price":2695,"weight":227,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"CS1829C\/O","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-332186.jpg?v=1595526310","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-493120.jpg?v=1595526310"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-332186.jpg?v=1595526310","options":["Title"],"media":[{"alt":"Sump pump alarm float switch CS1829C\/O - AlarmSystemStore.com","id":7363173810278,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-332186.jpg?v=1595526310"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-332186.jpg?v=1595526310","width":1024},{"alt":"Sump pump alarm float switch CS1829C\/O - AlarmSystemStore.com","id":7363173843046,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-493120.jpg?v=1595526310"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/sump-pump-alarm-float-switch-cs1829co-493120.jpg?v=1595526310","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSump pump alarm float switch CS1829C\/O\u003c\/h2\u003e\nThis sump pump alarm float switch is for use with alarm systems to provide a warning if the water rises too high in the your pump basket \/ bucket indicating a possible failure in the pump. This is a non powered mechanical device with both a normally open and normally closed magnetic switch. \u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\nOverall height............4 1\/2\"\u003cbr\u003e Overall width............3 \" \u003cbr\u003eTotal width in alarm...3 9\/16\" \u003cbr\u003eWidth of base............3\/4 \" \u003cbr\u003eTop of base holds standard 3\/8 press fit contact. \u003cbr\u003eSwing-arm top has 1\/4 \" magnet encased in rust resistant coating. \u003cbr\u003eSwing-arm bottom has inverted air-lock float. \u003cbr\u003eShipped with an eleven inch tie-wrap for mounting on vertical flow pipe in sump well."}
Tane WS-1 Water Sensor
  • {"id":4448423510118,"title":"Tane WS-1 Water Sensor","handle":"tane-ws-1-water-sensor","description":"\u003ch2\u003eTane WS-1  Water Sensor\u003c\/h2\u003e\n\u003cp\u003eThe WS-1 from TANE Alarm is an inexpensive flood \/ water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1\/2″ L × 1\/2″ W × 1\/2″ H. It is an open circuit and when water bridges the to probes it closes the loop. \u003c\/p\u003e\n\u003cp\u003eThe WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.\u003c\/p\u003e","published_at":"2020-01-06T13:56:53-05:00","created_at":"2019-12-31T09:47:53-05:00","vendor":"Tane","type":"Water, Temperature \u0026 Humidity Sensors","tags":["Hardwired Sensors","TANE WS-1","Temperature \u0026 Humidity Sensors","Water","WS-1","WS1"],"price":995,"price_min":995,"price_max":995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31263137136742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Tane WS-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tane WS-1 Water Sensor","public_title":null,"options":["Default Title"],"price":995,"weight":113,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"Tane WS-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","options":["Title"],"media":[{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173711974,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","width":1024},{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173744742,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309","width":1024},{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173777510,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eTane WS-1  Water Sensor\u003c\/h2\u003e\n\u003cp\u003eThe WS-1 from TANE Alarm is an inexpensive flood \/ water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1\/2″ L × 1\/2″ W × 1\/2″ H. It is an open circuit and when water bridges the to probes it closes the loop. \u003c\/p\u003e\n\u003cp\u003eThe WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.\u003c\/p\u003e"}
Hardwired Sensors Detectors
Tane WS-1 Water Sensor
$9.95
Tane WS-1  Water Sensor The WS-1 from TANE Alarm is an inexpensive flood / water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1/2″ L × 1/2″ W × 1/2″ H. It is an open circuit and when water bridges the to probes it closes the loop.  The WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.
Tane WS-1  Water Sensor The WS-1 from TANE Alarm is an inexpensive flood / water sensor that can be used...
  • {"id":4448423510118,"title":"Tane WS-1 Water Sensor","handle":"tane-ws-1-water-sensor","description":"\u003ch2\u003eTane WS-1  Water Sensor\u003c\/h2\u003e\n\u003cp\u003eThe WS-1 from TANE Alarm is an inexpensive flood \/ water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1\/2″ L × 1\/2″ W × 1\/2″ H. It is an open circuit and when water bridges the to probes it closes the loop. \u003c\/p\u003e\n\u003cp\u003eThe WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.\u003c\/p\u003e","published_at":"2020-01-06T13:56:53-05:00","created_at":"2019-12-31T09:47:53-05:00","vendor":"Tane","type":"Water, Temperature \u0026 Humidity Sensors","tags":["Hardwired Sensors","TANE WS-1","Temperature \u0026 Humidity Sensors","Water","WS-1","WS1"],"price":995,"price_min":995,"price_max":995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31263137136742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Tane WS-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tane WS-1 Water Sensor","public_title":null,"options":["Default Title"],"price":995,"weight":113,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"Tane WS-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","options":["Title"],"media":[{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173711974,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-867757.jpg?v=1595526309","width":1024},{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173744742,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-950190.jpg?v=1595526309","width":1024},{"alt":"Tane WS-1 Water Sensor - AlarmSystemStore.com","id":7363173777510,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/tane-ws-1-water-sensor-629353.jpg?v=1595526309","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eTane WS-1  Water Sensor\u003c\/h2\u003e\n\u003cp\u003eThe WS-1 from TANE Alarm is an inexpensive flood \/ water sensor that can be used in areas where water can possibly leak and ruin the interior of building. The WS-1 is white in color and measures 2 1\/2″ L × 1\/2″ W × 1\/2″ H. It is an open circuit and when water bridges the to probes it closes the loop. \u003c\/p\u003e\n\u003cp\u003eThe WS-1 will work on any 12VDC volt alarm system and if EOL resistors are used then the minimum voltage requirement of the system must be 6VDC. This cannot be used with wireless transmitters that accept simple hardwired switches. The WS-1 comes with a 6 inch jacketed leads and draws 6 mA of current.\u003c\/p\u003e"}