Add-on Remote For The Honeywell CE3 Code Encryptor The Honeywell Code Encrytor comes with two remotes, but what if you need three? The Honeywell CEREMLXB is the solution! This is an add on for the CE3 system and will let you have all the functionality that you get with the remotes that are packaged with the CE3. CE3 Code Encryptor Installation manualCE3 Code Encryptor Data sheet

The Ademco 12612 Power Supply Board with charge circuit is commonly used when you need additional aux power for powered devices or additional sirens. This board can supplu 6 volts or 12 VDC at a max of 1.2 amps. The board is preset at 12 VDC. This board does requires a power transformer and system backup battery, cabinet optional. The board does provide charge current to keep the backup battery charged. Features: Provides 6 or 12 VDC (6 or 12 volt operation)  1.2 Amps continuous output to power devices  Transformer purchased separately Factory preset at 13.6 VDC, with the jumper set to supply 12 volts DC  Use transformer 1322/TF3 for 6 volt operation...1361 for 12 volts DC AD12612 Installation manualAD12612 Data sheet

Ademco 4204 Relay Board Ademco 4204 Relay Board allows you to add additional relay outputs to any installation. The 4204 relays are connected to the Control/Communicator via the control's console wiring.You can use this relay board to control additional strobes, strobes, or anything else that you would like to have controlled by the alarm panel. It also features a tamper feature that sets off a trouble when someone tries to compromise it. It adds four programmable relays to your Ademco alarm system and fits inside the panel itself if it is not over-crowded already. Specifications: Physical Dimesions: Width: 6-1/2" (169mm)Height: 4-1/4" (108mm)Depth: 1-1/4" (32mm)Electrical:Voltage: 12VDC (From control's remote console connection points)Current: 15mA Standby plus 40 mA per active relay 4204 Installation manual4204 Data sheet