AlarmSystemStore.com BBB Business Review
c_f {}
custom_fields {}

ADC-SEM210-VT-VZ ALARM.COM DUAL PATH COMMUNICATOR FOR HONEYWELL VISTA (VERIZON LTE, ETHERNET)

Quick Overview
ADC-SEM210-VT-VZ ALARM.COM DUAL PATH COMMUNICATOR FOR HONEYWELL VISTA (VERIZON LTE, ETHERNET) What you'll get: ADC-SEM210-VT-VZWire and fuseEthernet dongleMounting screwsWall anchors The ADC-SEM210-VT-VZ is the System Enhancement Module for Alarm.com that...

$173.50

Ship out same day or within 24 hours
Add to Wishlist

ADC-SEM210-VT-VZ ALARM.COM DUAL PATH COMMUNICATOR FOR HONEYWELL VISTA (VERIZON LTE, ETHERNET)

What you'll get:

ADC-SEM210-VT-VZ
Wire and fuse
Ethernet dongle
Mounting screws
Wall anchors

The ADC-SEM210-VT-VZ is the System Enhancement Module for Alarm.com that can be used with a Honeywell Vista alarm system such as the Vista 10P, Vista 15P, or Vista 20P. It can be used with Vista systems dating back to 2005. It is a dual path Verizon cellular and Broadband internet communicator. The internet path is used if the cellular path goes down for whatever reason to provide a backup communication path. 

The SEM will power from the 12V source provided by the alarm panel itself. And because of the system's backup battery; it will stay up and running if the AC goes down for some reason. It connects via 3 wires to the panel's keybus terminals and the red/positive wire will connect to the positive terminal of the backup battery. 

The SEM has status LEDs to indicate communication errors, panel communication, network communication, and signal strength. These LEDs will be an invaluable tool when installing the SEM.

The ADC-SEM210-VT-VZ also features a Z-Wave control unit that you be able to utilize if you subscribe to the Alarm.com Residential Interactive Service and will give you the ability to create a Z-Wave network in your home for home automation devices such as lights, door locks, and thermostats. You can also use the SEM to send signals to our central station monitoring service.

Specifications

Compatibility - Honeywell/ADEMCO VISTA-10P, VISTA-15P, and VISTA-20P and equivalent panels.

Power requirements - 12 V nominal, 130 mA (continuous) 2000 mA (instantaneous peaks) maximum (from panel battery)

Cellular network - 4G LTE

Panel interactions - Three keypad bus connections 12V power and ground to panel battery

Alarm.com module indicators - One module/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs

SEM circuit board indicators - One LAN LED, one processor LED, one COMM fail LED

Z-Wave frequency - 908.4 MHz

Operating temperature - 32°F - 120°F (0°C - 49°C)

Storage temperature - -30°F - 140°F (-34°C - 60°C)

Humidity - 90% relative humidity non-condensing

Enclosure dimensions (L x W x D) - 7.5 x 4.25 x 1.5" (19.05 x 11.43 x 3.81 cm)

Case material - High-impact, ABS plastic

     

     

    Features

    Extended Information