Qolsys IQ Panel System And Accessory Tech Tips

Below you will find a collection of Tech Tips provided by DSC for the Qolsys IQ Panel alarm systems and accessories. These tech tips cover a variety of installation tips and programming instructions for different aspects of the IQ Panel 4, IQ 4 Hub, IQ4NS, and IQ PRO alarm systems. The PDFs you will find on each page are available for download and may also be printed if you desire. Products related to the Tech Tip are linked on each page.

These tips are sent out on a monthly basis by DSC, and as such, have covered equipment over the past few years. You may see tips related to equipment that is now discontinued, such as the IQ Panel 2+, however, all tips should still be relevant if you have that older equipment.

Qolsys IQ System Tips

- How to clear a fire alarm when using the IQ Pro with HS2TCHPN keypads

- PowerG + PGP9986 Water Tile Accessory Probe and Sensor Cable Installation and Programming

- PowerG+ PG9986 IQ Water Tile Installation Manual (IQ Panel 4) & Spec Sheet

- How To Enroll the PG9938 On The IQ Panel 4

- How To Enroll the PG9949 On The IQ Panel 4

- How To Mount And Feed a Legacy SRF Antenna On the IQ Panel 4

- No Entry Delay Arming Using Alarm.com For the IQ Panel 4

- How To Update The IQ Pro Via Access Point

- How To Set Up Keyswitch Arming And Disarming On The IQ Pro

- How To Set Up Keyswich Operation On The Qolsys IQ Panel Systems

- How to use Dark Mode On the Qolsys IQ Panels

- Understanding The Programming And Activation of Night Arming On The Qolsys IQ Panel 4

- Qolsys IQ Panel 4 / IQ4 Hub Ambient Temperature Display Settings

- Qolsys IQPRO Security System Sensors Groups (version 4.2.1n)

- Installation Manuals For The Qolsys IQ Panels Including Related Accessories And Sensors

- Battery Bulletin Regarding Qolsys IQ Panel Systems

- Adaptive Brightness Operation On The Qolsys IQ Panel Systems

- DC Voltage Input Test On The Qolsys IQ Panel Alarm Systems

- Sensor Groups Explained For Qolsys IQ Panels

- Technical Bulletin Regarding IQ Panel 4 Firmware Version 4.1.0

- Qolsys IQ Panel 2+ Screen Lock Feature

- Qolsys IQ Panel 2+ Event Buffer/History Log

- Collection of Qolsys Products With Part Numbers As Of January 2023

- Proper Routing For The RF Antenna On The Qolsys IQ Panel 2

Qolsys IQ Accessories Tips

- How To Properly Enroll the PG9929 and PG9939 Key Fobs Into The IQ Panel 4

- Qolsys PG9WLSHW8 & PG9HRDW8 Tamper Boot Concern

- Instructions For Wiring And Programming The COSMOD2W With The IQ Hardwire Translators

- Installation Manuals For The IQPRO Including Related Keypads, Modules and Sensors

- How To Update The HS2TCHPN Keypad For Use With IQPRO

- DSC PowerGPG9309 Wireless Contact Settings On The Qolsys IQ Panel Systems

- Enrollment Instructions For The PG9WLSHW8 And PG9HRDW8 On Qolsys IQ Panels

- Using The HSM2300 Power Supply Module On IQ Hardwire Translators

- Using The HSM2108 Zone Expander Module On IQ Hardwire Translators

- Delayed Response Functionality Using The PowerG IQHardwire Translators

- Upgrading Firmware On PowerG IQHardwire Translators

- 4-Wire Smoke Detector Use On PowerG IQHardwire Translators

- Bell Circuit Specs And Setting On PowerG IQHardwire Translators

- Open Zone Instructions For NEO HS2 Keypads When Used With IQ Panel 2+ Panels

- Zone EOL Settings On PowerG IQHardwire Translators With IQ Panel 2+

- PGM Specs And Settings On PowerG IQ Hardwired Translators With IQ Panel 2+

- Wiring And Programming 2-Wire Smokes On PowerG IQHardwire Translator With IQ Panel 2+

- CORBUS Wiring And Configuration On PowerG IQHardwire Translator With IQ Panel 2+

- Enrollment And Programming The PowerG IQHardwire Translators On The IQ Panel 2+