How do I enroll the HSM2HOST9 module?
The enrollment process for modules on the PowerSeries NEO should be quick and painless. The first thing you’ll want to do is make sure that every module that you currently want to enroll into the alarm system is properly wired on the CORBUS and that there isn’t excessive power draw. Then enter programming with *8 and the installer code. You’ll then enter 902 to go to the module section. And press * to enter the auto-enrollment mode for the modules. The screen should display the type and number of modules so that you can confirm that everything is correct. Then press the # key a few times to exit out of programming.