Do I need to address the HSM2108 module?

<Back

The HSM2108 is automatically addressed based on the order that it is enrolled. You can control the order by manually enrolling them or connecting them one at a time. To check what slots the zone expanders are in:

1. Enter programming.
2. Enter section 902.
3. Enter subsection 003.
4. You can now scroll through the enrolled devices. The screen will display the device type, slot number, and serial number. You can use the serial number and slot number to determine which zone expander corresponds to which zones. From here you can also edit the slot number if needed.
5. Press # a few times to exit programming mode.