LSD REB34 3/4" ReBore-Zit - (3/8" Pilot Size (62-368)

LSD 85-124 Wet Noodle Magnetic In-Wall Retrieval System The Wet Noodle is an in-wall retrieval system which allows you to fish wire through walls with ease. The 85-124 features an 18" telescoping pocket retriever that you can use to snag wire and pull it through with its hooked tip. You also get a 24" flexible, insulated retriever (the Wet Noodle) that features magnets on both ends. On one end of the Noodle is a 1/4" Neodymium magnet which means that it has some serious pulling power. The last thing you'll get with this is 10ft. of lightweight ball chain with a stop-ring to be used with the pocket retriever. No matter if you're doing a retro install or just pulling wire for a new zone; this will become a trusted tool in your DIY installation arsenal.

LSD 53-310 Mini Pocket Retriever The LSD 53-310 Mini Pocket Retriever is a tool that can be used to pull things through walls such as wire. This is meant to be a helper tool. It measures in at 5" collapsed and when its telescoping rod is extended it measures an impressive 18". This features a 'J' hook at the end to let you hook on to whatever you're trying to fish through the wall. The hook and extended pole will fit through a 1/4" hole in the wall making this a good tool for a quick extraction without having to puncture a bigger hole in the wall that what is needed. This will fit nicely in your pocket when not needed and in the retracted position.  

LSD 82-110 Grabbit Mini 10ft Fiberglass Telescoping Pole  The 82-100 Grabbit is a lightweight fiberglass pole that you can use in limited access areas and false ceilings to push or pull wire. This pole is telescoping which means that it can be extended by pulling the tip out to a maximum of 10'. Because of its fiberglass design; the pole will friction lock when extended so you don't have to worry about it retracting while pushing wire through a space. Also, because of its fiberglass design; the pole is non-conductive so you won't have to worry about getting electrocuted if you somehow contact a live wire. The pole's Z-Tip can be used to grab wire and because of the bladed edges it can grab onto the wire's insulation. When retracted; the Grabbit measures in at 22"