Home > Honeywell Security > Honeywell Security Wireless >

Ademco 5800SS1 Wireless Shock Sensor
Ademco 5800SS1 Wireless Shock Sensor

Our Price: $44.40

Availability: IN STOCK: Ships out same day or within 24 hours.
Product Code: ADEMCO-5800SS1


Ademco 5800SS1 Wireless Shock Sensor

The Ademco 5800SS1 is an easy to install wireless shock sensor. This sensor will be immune from false alarms and can be mounted on any type of glass such as: plate, tempered, wired, and laminate. This is also compatible with the Lynx and Honeywell 5800 systems.

The premise behind this device is that it monitors for hard vibrations across a surface. So if someone bangs on the surface that this shock sensor is attached to; it will set off an alarm event.

Replacement batteries for this device is the CR2 lithium 3 volt battery


Glass Coverage
Plate, laminated, wired, sealed insulated, coated and
tempered, up to 1/4 inches, (6.35mm) thick
10 ft (3m) distance from mounting location
One sensor is required for each separate pane of glass


1.6 inches H x 1.6 inches W x 0.8 inches D
(41mm x 41mm x 20mm)


Single 3V Panasonic CR2, Sanyo CR2, or Duracell
DLCR2 lithium battery

Operating Temperature
0F to 130F (-18C to +55C)

Use with all Vista control panels that support 5800
Series wireless devices

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Honeywell Security > Honeywell Security Wireless
Wireless Sensors > Honeywell Security Wireless Sensors > Honeywell Wireless Motion - Glassbreak - Fire Sensors