
Honeywell Ademco 5800RP RF Wireless Repeater Module
The Honeywell 5800RP-RF is a wireless repeater that will extend the range of all 5800 series RF devices with the Lynx and Vista Series alarm systems. The 5800RP requires a 9VAC transformer that is not included unless selected above. It also uses a backup battery to ensure that your devices do not lose connectivity in the event of a power outage. The battery is included in the box with the repeater, but if you need a replacement see the link below.
Specifications:
Dimensions:
7-3/8 W x 4-3/8 (10-7/8 w/antennas) H x 1-7/16 D.188mm W x 11 2mm H (277mm w/antennas) x 37mm D.
Input Voltage:
*NOT INCLUDED UNLESS SELECTED ABOVE*
12VDC or 9VAC, 15VA (from separate powersupply such as K10145WH transformer).
Current:
80mABattery Pack:
*INCLUDED WITH HONEYWELL 5800RP*
Rechargeable, part number K0257 Battery
Features:
- Extends the range of 5800 series of wireless devices
- Receives alarm, status, and control messages from 5800 RF devices, and repeats these messages to the control panel via the primary receiver
- Compatible with all 5800 wireless devices (including bi-directional devices)
- UL residential burglary listed
- AC powered with a six-hour battery backup
- Tamper protected
Related Products

-
{"id":7037321733,"title":"Honeywell 5883H Wireless Transceiver","handle":"honeywell-5883h-wireless-transceiver","description":"\u003ch2\u003eHoneywell 5883H Wireless Transceiver\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThe 5883H combines the technology of a wireless receiver and a wireless transmitter. The 5883H contains the same internal guts as a 5881ENH wireless receiver and a 5800TM wireless transmitter. \u003cbr\u003e\u003cbr\u003eThere is a difference between having a 5883H and using a combination of a 5881ENH\/5800TM though. We have found out, through exhausting phone calls, that the 5883H, although using the circuitry of the 5881ENH\/5800TM combo also sends out a serial number to certain wireless devices instead of using an RF house code. If you have a 5839 keypad you will only be able to use the 5883H instead of using a paired 5881ENH\/5800TM.\u003cbr\u003e\u003cbr\u003eYou can pick up up to 40 wireless devices with this unit.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/5800-Receivers-Data-Sheet.PDF?14563690923375147551\" target=\"_blank\" title=\"5883H Data sheet\" rel=\"noopener noreferrer\"\u003e5883H Installation manual\u003cbr\u003e5883H Data sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2012-05-20T22:51:00-04:00","created_at":"2017-01-23T07:10:32-05:00","vendor":"Honeywell","type":"Honeywell Security Expansion Modules","tags":["Els PW 22614","Honeywell Expansion Modules","Honeywell Security","Honeywell Security Expansion Modules"],"price":26795,"price_min":26795,"price_max":26795,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526195205,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5883H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Honeywell 5883H Wireless Transceiver","public_title":null,"options":["Default Title"],"price":26795,"weight":907,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"5883H","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-322285.jpg?v=1595526198","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-717189.jpg?v=1595526199","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-331891.jpg?v=1595526199","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-775549.jpg?v=1595526199","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-255106.jpg?v=1595526199","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-540758.jpg?v=1595526199"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-322285.jpg?v=1595526198","options":["Title"],"media":[{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140485222,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-322285.jpg?v=1595526198"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-322285.jpg?v=1595526198","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140616294,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-717189.jpg?v=1595526199"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-717189.jpg?v=1595526199","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140649062,"position":3,"preview_image":{"aspect_ratio":1.499,"height":683,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-331891.jpg?v=1595526199"},"aspect_ratio":1.499,"height":683,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-331891.jpg?v=1595526199","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140681830,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-775549.jpg?v=1595526199"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-775549.jpg?v=1595526199","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140714598,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-255106.jpg?v=1595526199"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-255106.jpg?v=1595526199","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140747366,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-540758.jpg?v=1595526199"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-540758.jpg?v=1595526199","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eHoneywell 5883H Wireless Transceiver\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThe 5883H combines the technology of a wireless receiver and a wireless transmitter. The 5883H contains the same internal guts as a 5881ENH wireless receiver and a 5800TM wireless transmitter. \u003cbr\u003e\u003cbr\u003eThere is a difference between having a 5883H and using a combination of a 5881ENH\/5800TM though. We have found out, through exhausting phone calls, that the 5883H, although using the circuitry of the 5881ENH\/5800TM combo also sends out a serial number to certain wireless devices instead of using an RF house code. If you have a 5839 keypad you will only be able to use the 5883H instead of using a paired 5881ENH\/5800TM.\u003cbr\u003e\u003cbr\u003eYou can pick up up to 40 wireless devices with this unit.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/5800-Receivers-Data-Sheet.PDF?14563690923375147551\" target=\"_blank\" title=\"5883H Data sheet\" rel=\"noopener noreferrer\"\u003e5883H Installation manual\u003cbr\u003e5883H Data sheet\u003c\/a\u003e\u003c\/p\u003e"}
$267.95
Honeywell 5883H Wireless Transceiver
The 5883H combines the technology of a wireless receiver and a wireless transmitter. The 5883H contains the same internal guts as a 5881ENH wireless receiver and a 5800TM wireless transmitter. There is a difference between having a 5883H and using a combination of a 5881ENH/5800TM though. We have found out, through exhausting phone calls, that the 5883H, although using the circuitry of the 5881ENH/5800TM combo also sends out a serial number to certain wireless devices instead of using an RF house code. If you have a 5839 keypad you will only be able to use the 5883H instead of using a paired 5881ENH/5800TM.You can pick up up to 40 wireless devices with this unit.
5883H Installation manual5883H Data sheet
Honeywell 5883H Wireless Transceiver The 5883H combines the technology of a wireless receiver and a wireless transmitter. The 5883H contains...
-
{"id":7037321733,"title":"Honeywell 5883H Wireless Transceiver","handle":"honeywell-5883h-wireless-transceiver","description":"\u003ch2\u003eHoneywell 5883H Wireless Transceiver\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThe 5883H combines the technology of a wireless receiver and a wireless transmitter. The 5883H contains the same internal guts as a 5881ENH wireless receiver and a 5800TM wireless transmitter. \u003cbr\u003e\u003cbr\u003eThere is a difference between having a 5883H and using a combination of a 5881ENH\/5800TM though. We have found out, through exhausting phone calls, that the 5883H, although using the circuitry of the 5881ENH\/5800TM combo also sends out a serial number to certain wireless devices instead of using an RF house code. If you have a 5839 keypad you will only be able to use the 5883H instead of using a paired 5881ENH\/5800TM.\u003cbr\u003e\u003cbr\u003eYou can pick up up to 40 wireless devices with this unit.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/5800-Receivers-Data-Sheet.PDF?14563690923375147551\" target=\"_blank\" title=\"5883H Data sheet\" rel=\"noopener noreferrer\"\u003e5883H Installation manual\u003cbr\u003e5883H Data sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2012-05-20T22:51:00-04:00","created_at":"2017-01-23T07:10:32-05:00","vendor":"Honeywell","type":"Honeywell Security Expansion Modules","tags":["Els PW 22614","Honeywell Expansion Modules","Honeywell Security","Honeywell Security Expansion Modules"],"price":26795,"price_min":26795,"price_max":26795,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526195205,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5883H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Honeywell 5883H Wireless Transceiver","public_title":null,"options":["Default Title"],"price":26795,"weight":907,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"5883H","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-322285.jpg?v=1595526198","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-717189.jpg?v=1595526199","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-331891.jpg?v=1595526199","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-775549.jpg?v=1595526199","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-255106.jpg?v=1595526199","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-540758.jpg?v=1595526199"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-322285.jpg?v=1595526198","options":["Title"],"media":[{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140485222,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-322285.jpg?v=1595526198"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-322285.jpg?v=1595526198","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140616294,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-717189.jpg?v=1595526199"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-717189.jpg?v=1595526199","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140649062,"position":3,"preview_image":{"aspect_ratio":1.499,"height":683,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-331891.jpg?v=1595526199"},"aspect_ratio":1.499,"height":683,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-331891.jpg?v=1595526199","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140681830,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-775549.jpg?v=1595526199"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-775549.jpg?v=1595526199","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140714598,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-255106.jpg?v=1595526199"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-255106.jpg?v=1595526199","width":1024},{"alt":"Honeywell 5883H Wireless Transceiver - AlarmSystemStore.com","id":7363140747366,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-540758.jpg?v=1595526199"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-5883h-wireless-transceiver-540758.jpg?v=1595526199","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eHoneywell 5883H Wireless Transceiver\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThe 5883H combines the technology of a wireless receiver and a wireless transmitter. The 5883H contains the same internal guts as a 5881ENH wireless receiver and a 5800TM wireless transmitter. \u003cbr\u003e\u003cbr\u003eThere is a difference between having a 5883H and using a combination of a 5881ENH\/5800TM though. We have found out, through exhausting phone calls, that the 5883H, although using the circuitry of the 5881ENH\/5800TM combo also sends out a serial number to certain wireless devices instead of using an RF house code. If you have a 5839 keypad you will only be able to use the 5883H instead of using a paired 5881ENH\/5800TM.\u003cbr\u003e\u003cbr\u003eYou can pick up up to 40 wireless devices with this unit.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/5800-Receivers-Data-Sheet.PDF?14563690923375147551\" target=\"_blank\" title=\"5883H Data sheet\" rel=\"noopener noreferrer\"\u003e5883H Installation manual\u003cbr\u003e5883H Data sheet\u003c\/a\u003e\u003c\/p\u003e"}

-
{"id":7037325957,"title":"Honeywell Ademco 12612 Power Supply Board","handle":"ademco-12612-power-supply-board","description":"\u003ch2\u003eHoneywell Ademco 12612 Power Supply Board\u003c\/h2\u003e\n\u003cp\u003eThe Honeywell Ademco 12612 Power Supply Board with charge circuit is commonly used when you need additional aux power for powered devices or additional sirens. This board can supplu 6 volts or 12 VDC at a max of 1.2 amps. The board is preset at 12 VDC. This board does requires a power transformer and system backup battery, cabinet optional. The board does provide charge current to keep the backup battery charged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides 6 or 12 VDC (6 or 12 volt operation) \u003c\/li\u003e\n\u003cli\u003e1.2 Amps continuous output to power devices \u003c\/li\u003e\n\u003cli\u003eTransformer purchased separately Factory preset at 13.6 VDC, with the jumper set to supply 12 volts DC \u003c\/li\u003e\n\u003cli\u003eUse transformer 1322\/TF3 for 6 volt operation...1361 for 12 volts DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/AD12612_Installation-Instructions.PDF?8833695308316292152\" target=\"_blank\" title=\"AD12612 Installation manual\" rel=\"noopener noreferrer\"\u003eAD12612 Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/AD12612_Cut-Sheet.PDF?8833695308316292152\" target=\"_blank\" title=\"AD12612 Data sheet\" rel=\"noopener noreferrer\"\u003eAD12612 Data sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2013-01-28T02:02:00-05:00","created_at":"2017-01-23T07:11:19-05:00","vendor":"Honeywell","type":"Honeywell Security Expansion Modules","tags":["Honeywell Expansion Modules","Honeywell Security","Honeywell Security Expansion Modules"],"price":3495,"price_min":3495,"price_max":3495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526225669,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Ademco-AD12612","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Honeywell Ademco 12612 Power Supply Board","public_title":null,"options":["Default Title"],"price":3495,"weight":454,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"Ademco-AD12612","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-282147.jpg?v=1595526180","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-701886.jpg?v=1595526180","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-987105.jpg?v=1595526180"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-282147.jpg?v=1595526180","options":["Title"],"media":[{"alt":"Honeywell Ademco 12612 Power Supply Board - AlarmSystemStore.com","id":7363133014118,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-282147.jpg?v=1595526180"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-282147.jpg?v=1595526180","width":1024},{"alt":"Honeywell Ademco 12612 Power Supply Board - AlarmSystemStore.com","id":7363133079654,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-701886.jpg?v=1595526180"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-701886.jpg?v=1595526180","width":1024},{"alt":"Honeywell Ademco 12612 Power Supply Board - AlarmSystemStore.com","id":7363133145190,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-987105.jpg?v=1595526180"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-987105.jpg?v=1595526180","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eHoneywell Ademco 12612 Power Supply Board\u003c\/h2\u003e\n\u003cp\u003eThe Honeywell Ademco 12612 Power Supply Board with charge circuit is commonly used when you need additional aux power for powered devices or additional sirens. This board can supplu 6 volts or 12 VDC at a max of 1.2 amps. The board is preset at 12 VDC. This board does requires a power transformer and system backup battery, cabinet optional. The board does provide charge current to keep the backup battery charged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides 6 or 12 VDC (6 or 12 volt operation) \u003c\/li\u003e\n\u003cli\u003e1.2 Amps continuous output to power devices \u003c\/li\u003e\n\u003cli\u003eTransformer purchased separately Factory preset at 13.6 VDC, with the jumper set to supply 12 volts DC \u003c\/li\u003e\n\u003cli\u003eUse transformer 1322\/TF3 for 6 volt operation...1361 for 12 volts DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/AD12612_Installation-Instructions.PDF?8833695308316292152\" target=\"_blank\" title=\"AD12612 Installation manual\" rel=\"noopener noreferrer\"\u003eAD12612 Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/AD12612_Cut-Sheet.PDF?8833695308316292152\" target=\"_blank\" title=\"AD12612 Data sheet\" rel=\"noopener noreferrer\"\u003eAD12612 Data sheet\u003c\/a\u003e\u003c\/p\u003e"}
$34.95
Honeywell Ademco 12612 Power Supply Board
The Honeywell Ademco 12612 Power Supply Board with charge circuit is commonly used when you need additional aux power for powered devices or additional sirens. This board can supplu 6 volts or 12 VDC at a max of 1.2 amps. The board is preset at 12 VDC. This board does requires a power transformer and system backup battery, cabinet optional. The board does provide charge current to keep the backup battery charged.
Features:
Provides 6 or 12 VDC (6 or 12 volt operation)
1.2 Amps continuous output to power devices
Transformer purchased separately Factory preset at 13.6 VDC, with the jumper set to supply 12 volts DC
Use transformer 1322/TF3 for 6 volt operation...1361 for 12 volts DC
AD12612 Installation manualAD12612 Data sheet
Honeywell Ademco 12612 Power Supply Board The Honeywell Ademco 12612 Power Supply Board with charge circuit is commonly used when you...
-
{"id":7037325957,"title":"Honeywell Ademco 12612 Power Supply Board","handle":"ademco-12612-power-supply-board","description":"\u003ch2\u003eHoneywell Ademco 12612 Power Supply Board\u003c\/h2\u003e\n\u003cp\u003eThe Honeywell Ademco 12612 Power Supply Board with charge circuit is commonly used when you need additional aux power for powered devices or additional sirens. This board can supplu 6 volts or 12 VDC at a max of 1.2 amps. The board is preset at 12 VDC. This board does requires a power transformer and system backup battery, cabinet optional. The board does provide charge current to keep the backup battery charged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides 6 or 12 VDC (6 or 12 volt operation) \u003c\/li\u003e\n\u003cli\u003e1.2 Amps continuous output to power devices \u003c\/li\u003e\n\u003cli\u003eTransformer purchased separately Factory preset at 13.6 VDC, with the jumper set to supply 12 volts DC \u003c\/li\u003e\n\u003cli\u003eUse transformer 1322\/TF3 for 6 volt operation...1361 for 12 volts DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/AD12612_Installation-Instructions.PDF?8833695308316292152\" target=\"_blank\" title=\"AD12612 Installation manual\" rel=\"noopener noreferrer\"\u003eAD12612 Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/AD12612_Cut-Sheet.PDF?8833695308316292152\" target=\"_blank\" title=\"AD12612 Data sheet\" rel=\"noopener noreferrer\"\u003eAD12612 Data sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2013-01-28T02:02:00-05:00","created_at":"2017-01-23T07:11:19-05:00","vendor":"Honeywell","type":"Honeywell Security Expansion Modules","tags":["Honeywell Expansion Modules","Honeywell Security","Honeywell Security Expansion Modules"],"price":3495,"price_min":3495,"price_max":3495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526225669,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Ademco-AD12612","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Honeywell Ademco 12612 Power Supply Board","public_title":null,"options":["Default Title"],"price":3495,"weight":454,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"Ademco-AD12612","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-282147.jpg?v=1595526180","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-701886.jpg?v=1595526180","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-987105.jpg?v=1595526180"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-282147.jpg?v=1595526180","options":["Title"],"media":[{"alt":"Honeywell Ademco 12612 Power Supply Board - AlarmSystemStore.com","id":7363133014118,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-282147.jpg?v=1595526180"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-282147.jpg?v=1595526180","width":1024},{"alt":"Honeywell Ademco 12612 Power Supply Board - AlarmSystemStore.com","id":7363133079654,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-701886.jpg?v=1595526180"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-701886.jpg?v=1595526180","width":1024},{"alt":"Honeywell Ademco 12612 Power Supply Board - AlarmSystemStore.com","id":7363133145190,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-987105.jpg?v=1595526180"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-12612-power-supply-board-987105.jpg?v=1595526180","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eHoneywell Ademco 12612 Power Supply Board\u003c\/h2\u003e\n\u003cp\u003eThe Honeywell Ademco 12612 Power Supply Board with charge circuit is commonly used when you need additional aux power for powered devices or additional sirens. This board can supplu 6 volts or 12 VDC at a max of 1.2 amps. The board is preset at 12 VDC. This board does requires a power transformer and system backup battery, cabinet optional. The board does provide charge current to keep the backup battery charged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides 6 or 12 VDC (6 or 12 volt operation) \u003c\/li\u003e\n\u003cli\u003e1.2 Amps continuous output to power devices \u003c\/li\u003e\n\u003cli\u003eTransformer purchased separately Factory preset at 13.6 VDC, with the jumper set to supply 12 volts DC \u003c\/li\u003e\n\u003cli\u003eUse transformer 1322\/TF3 for 6 volt operation...1361 for 12 volts DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/AD12612_Installation-Instructions.PDF?8833695308316292152\" target=\"_blank\" title=\"AD12612 Installation manual\" rel=\"noopener noreferrer\"\u003eAD12612 Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/AD12612_Cut-Sheet.PDF?8833695308316292152\" target=\"_blank\" title=\"AD12612 Data sheet\" rel=\"noopener noreferrer\"\u003eAD12612 Data sheet\u003c\/a\u003e\u003c\/p\u003e"}

-
{"id":7037323397,"title":"Honeywell Ademco 4204 Relay Board","handle":"ademco-4204-relay-board","description":"\u003ch2\u003e\n\u003cstrong\u003eHoneywell \u003c\/strong\u003eAdemco 4204 Relay Board\u003c\/h2\u003e\nAdemco 4204 Relay Board allows you to add additional relay outputs to any installation. The 4204 relays are connected to the Control\/Communicator via the control's console wiring.\u003cbr\u003e\u003cbr\u003eYou can use this relay board to control additional strobes, strobes, or anything else that you would like to have controlled by the alarm panel. It also features a tamper feature that sets off a trouble when someone tries to compromise it. It adds four programmable relays to your Ademco alarm system and fits inside the panel itself if it is not over-crowded already.\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003ePhysical Dimesions:\u003c\/span\u003e \u003cbr\u003eWidth: 6-1\/2\" (169mm)\u003cbr\u003eHeight: 4-1\/4\" (108mm)\u003cbr\u003eDepth: 1-1\/4\" (32mm)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eElectrical:\u003c\/span\u003e\u003cbr\u003eVoltage: 12VDC (From control's remote console connection points)\u003cbr\u003eCurrent: 15mA Standby plus 40 mA per active relay\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/4204-Installation-Instructions.PDF?8789805694056687812\" target=\"_blank\" title=\"4204 Installation manual\" rel=\"noopener noreferrer\"\u003e4204 Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/4204-Cut-Sheet.PDF?8789805694056687812\" target=\"_blank\" title=\"4204 Data sheet\" rel=\"noopener noreferrer\"\u003e4204 Data sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2016-02-11T04:55:00-05:00","created_at":"2017-01-23T07:10:51-05:00","vendor":"Honeywell","type":"Honeywell Security Expansion Modules","tags":["Els PW 22614","Honeywell Expansion Modules","Honeywell Security","Honeywell Security Expansion Modules"],"price":9600,"price_min":9600,"price_max":9600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526213829,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Ademco-4204","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Honeywell Ademco 4204 Relay Board","public_title":null,"options":["Default Title"],"price":9600,"weight":454,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":"Ademco-4204","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-123494.jpg?v=1595526187","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-884343.jpg?v=1595526187","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-940120.jpg?v=1595526187"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-123494.jpg?v=1595526187","options":["Title"],"media":[{"alt":"Honeywell Ademco 4204 Relay Board - AlarmSystemStore.com","id":7363134947430,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-123494.jpg?v=1595526187"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-123494.jpg?v=1595526187","width":1024},{"alt":"Honeywell Ademco 4204 Relay Board - AlarmSystemStore.com","id":7363134980198,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-884343.jpg?v=1595526187"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-884343.jpg?v=1595526187","width":1024},{"alt":"Honeywell Ademco 4204 Relay Board - AlarmSystemStore.com","id":7363135012966,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-940120.jpg?v=1595526187"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-940120.jpg?v=1595526187","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\n\u003cstrong\u003eHoneywell \u003c\/strong\u003eAdemco 4204 Relay Board\u003c\/h2\u003e\nAdemco 4204 Relay Board allows you to add additional relay outputs to any installation. The 4204 relays are connected to the Control\/Communicator via the control's console wiring.\u003cbr\u003e\u003cbr\u003eYou can use this relay board to control additional strobes, strobes, or anything else that you would like to have controlled by the alarm panel. It also features a tamper feature that sets off a trouble when someone tries to compromise it. It adds four programmable relays to your Ademco alarm system and fits inside the panel itself if it is not over-crowded already.\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003ePhysical Dimesions:\u003c\/span\u003e \u003cbr\u003eWidth: 6-1\/2\" (169mm)\u003cbr\u003eHeight: 4-1\/4\" (108mm)\u003cbr\u003eDepth: 1-1\/4\" (32mm)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eElectrical:\u003c\/span\u003e\u003cbr\u003eVoltage: 12VDC (From control's remote console connection points)\u003cbr\u003eCurrent: 15mA Standby plus 40 mA per active relay\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/4204-Installation-Instructions.PDF?8789805694056687812\" target=\"_blank\" title=\"4204 Installation manual\" rel=\"noopener noreferrer\"\u003e4204 Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/4204-Cut-Sheet.PDF?8789805694056687812\" target=\"_blank\" title=\"4204 Data sheet\" rel=\"noopener noreferrer\"\u003e4204 Data sheet\u003c\/a\u003e\u003c\/p\u003e"}
$96.00
Honeywell Ademco 4204 Relay Board
Ademco 4204 Relay Board allows you to add additional relay outputs to any installation. The 4204 relays are connected to the Control/Communicator via the control's console wiring.You can use this relay board to control additional strobes, strobes, or anything else that you would like to have controlled by the alarm panel. It also features a tamper feature that sets off a trouble when someone tries to compromise it. It adds four programmable relays to your Ademco alarm system and fits inside the panel itself if it is not over-crowded already.
Specifications:
Physical Dimesions: Width: 6-1/2" (169mm)Height: 4-1/4" (108mm)Depth: 1-1/4" (32mm)Electrical:Voltage: 12VDC (From control's remote console connection points)Current: 15mA Standby plus 40 mA per active relay
4204 Installation manual4204 Data sheet
Honeywell Ademco 4204 Relay Board Ademco 4204 Relay Board allows you to add additional relay outputs to any installation. The 4204...
-
{"id":7037323397,"title":"Honeywell Ademco 4204 Relay Board","handle":"ademco-4204-relay-board","description":"\u003ch2\u003e\n\u003cstrong\u003eHoneywell \u003c\/strong\u003eAdemco 4204 Relay Board\u003c\/h2\u003e\nAdemco 4204 Relay Board allows you to add additional relay outputs to any installation. The 4204 relays are connected to the Control\/Communicator via the control's console wiring.\u003cbr\u003e\u003cbr\u003eYou can use this relay board to control additional strobes, strobes, or anything else that you would like to have controlled by the alarm panel. It also features a tamper feature that sets off a trouble when someone tries to compromise it. It adds four programmable relays to your Ademco alarm system and fits inside the panel itself if it is not over-crowded already.\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003ePhysical Dimesions:\u003c\/span\u003e \u003cbr\u003eWidth: 6-1\/2\" (169mm)\u003cbr\u003eHeight: 4-1\/4\" (108mm)\u003cbr\u003eDepth: 1-1\/4\" (32mm)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eElectrical:\u003c\/span\u003e\u003cbr\u003eVoltage: 12VDC (From control's remote console connection points)\u003cbr\u003eCurrent: 15mA Standby plus 40 mA per active relay\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/4204-Installation-Instructions.PDF?8789805694056687812\" target=\"_blank\" title=\"4204 Installation manual\" rel=\"noopener noreferrer\"\u003e4204 Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/4204-Cut-Sheet.PDF?8789805694056687812\" target=\"_blank\" title=\"4204 Data sheet\" rel=\"noopener noreferrer\"\u003e4204 Data sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2016-02-11T04:55:00-05:00","created_at":"2017-01-23T07:10:51-05:00","vendor":"Honeywell","type":"Honeywell Security Expansion Modules","tags":["Els PW 22614","Honeywell Expansion Modules","Honeywell Security","Honeywell Security Expansion Modules"],"price":9600,"price_min":9600,"price_max":9600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526213829,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Ademco-4204","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Honeywell Ademco 4204 Relay Board","public_title":null,"options":["Default Title"],"price":9600,"weight":454,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":"Ademco-4204","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-123494.jpg?v=1595526187","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-884343.jpg?v=1595526187","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-940120.jpg?v=1595526187"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-123494.jpg?v=1595526187","options":["Title"],"media":[{"alt":"Honeywell Ademco 4204 Relay Board - AlarmSystemStore.com","id":7363134947430,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-123494.jpg?v=1595526187"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-123494.jpg?v=1595526187","width":1024},{"alt":"Honeywell Ademco 4204 Relay Board - AlarmSystemStore.com","id":7363134980198,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-884343.jpg?v=1595526187"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-884343.jpg?v=1595526187","width":1024},{"alt":"Honeywell Ademco 4204 Relay Board - AlarmSystemStore.com","id":7363135012966,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-940120.jpg?v=1595526187"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/honeywell-ademco-4204-relay-board-940120.jpg?v=1595526187","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\n\u003cstrong\u003eHoneywell \u003c\/strong\u003eAdemco 4204 Relay Board\u003c\/h2\u003e\nAdemco 4204 Relay Board allows you to add additional relay outputs to any installation. The 4204 relays are connected to the Control\/Communicator via the control's console wiring.\u003cbr\u003e\u003cbr\u003eYou can use this relay board to control additional strobes, strobes, or anything else that you would like to have controlled by the alarm panel. It also features a tamper feature that sets off a trouble when someone tries to compromise it. It adds four programmable relays to your Ademco alarm system and fits inside the panel itself if it is not over-crowded already.\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003ePhysical Dimesions:\u003c\/span\u003e \u003cbr\u003eWidth: 6-1\/2\" (169mm)\u003cbr\u003eHeight: 4-1\/4\" (108mm)\u003cbr\u003eDepth: 1-1\/4\" (32mm)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eElectrical:\u003c\/span\u003e\u003cbr\u003eVoltage: 12VDC (From control's remote console connection points)\u003cbr\u003eCurrent: 15mA Standby plus 40 mA per active relay\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/4204-Installation-Instructions.PDF?8789805694056687812\" target=\"_blank\" title=\"4204 Installation manual\" rel=\"noopener noreferrer\"\u003e4204 Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/4204-Cut-Sheet.PDF?8789805694056687812\" target=\"_blank\" title=\"4204 Data sheet\" rel=\"noopener noreferrer\"\u003e4204 Data sheet\u003c\/a\u003e\u003c\/p\u003e"}





