Z-Wave® Control Communication Module for L5100

Honeywell 4120TR Trigger Cable The Honeywell 4120TR is a trigger cable that is used to trigger certain programmed events using a Honeywell Vista trigger output pins. These are most commonly used for resetting 4-wire smoke detectors. The 4120TR is a wiring harness that will connect to the trigger pins via a plug. These have many uses. If you have any questions as to the workings of the 4120TR then please give our tech support specialists a call to inquire.

Honeywell 5883H Wireless Transceiver The 5883H combines the technology of a wireless receiver and a wireless transmitter. The 5883H contains the same internal guts as a 5881ENH wireless receiver and a 5800TM wireless transmitter. There is a difference between having a 5883H and using a combination of a 5881ENH/5800TM though. We have found out, through exhausting phone calls, that the 5883H, although using the circuitry of the 5881ENH/5800TM combo also sends out a serial number to certain wireless devices instead of using an RF house code. If you have a 5839 keypad you will only be able to use the 5883H instead of using a paired 5881ENH/5800TM.You can pick up up to 40 wireless devices with this unit. 5883H Installation manual5883H Data sheet

Honeywell Ademco 12612 Power Supply Board The Honeywell Ademco 12612 Power Supply Board with charge circuit is commonly used when you need additional aux power for powered devices or additional sirens. This board can supplu 6 volts or 12 VDC at a max of 1.2 amps. The board is preset at 12 VDC. This board does requires a power transformer and system backup battery, cabinet optional. The board does provide charge current to keep the backup battery charged. Features: Provides 6 or 12 VDC (6 or 12 volt operation)  1.2 Amps continuous output to power devices  Transformer purchased separately Factory preset at 13.6 VDC, with the jumper set to supply 12 volts DC  Use transformer 1322/TF3 for 6 volt operation...1361 for 12 volts DC AD12612 Installation manualAD12612 Data sheet