
WD500Z5-1 Z-Wave Wall Dimmer Switch
The WD500Z-1 is a wall mountable dimmer switch that can be installed in any home. With this module you will be able to provide you with control of any lights on the circuit which the module is installed on. The module can be wired in just as easily as any other dimming unit and has the added feature of acting as a repeater for the Z-Wave network in your home. This module does have a load limit of 500 watts so be aware of this when installing it for control of lighting. This unit also includes the patented Nortek Auto-Sense feature that will allow independent control of lighting regardless if a scene is set in your control unit.Installing this means that you will be working with electrical wiring so be sure to be safe and turn off the electrical circuit breaker to the line you're working on. After that youll connect the wiring in from your previous switch to the WD500Z-1. After all wiring has been securely and safely done you can learn the module in by setting your control to discover mode and then switching the switch to the on position.
Specifications:
Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles)Signal (Frequency): 908.42 MHz
Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
Input: 120v 15A 60Hz
Network wide inclusion
Scene: Command class
Security beaming
Requires a Neutral
Auto-Sense feature built-in
Related Products

-
{"id":8042179297600,"title":"Alarm.com ADC-S40-T Temperature - Humidity Sensor","handle":"alarm-com-adc-s40-t-temperature-humidity-sensor","description":"\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlarm.com ADC-S40-T Temperature - Humidity Sensor\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ADC-S40-T is a temperature and humidity sensor designed for Alarm.com automation services. Using this sensor, you are able to monitor both the temperature and humidity in any room in your home or business remotely using the Alarm.com app or computer portal. The ADC-S40-T connects to your Alarm.com account using Z-wave technology and offers both authorized S2 and unauthorized S2 communication. When paired with an Alarm.com thermostat, such as the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-adc-t40k-hd-smart-color-touchscreen-thermostat\" target=\"_blank\"\u003eADC-T40K-HD\u003c\/a\u003e, the thermostat will use the S40-T to better normalize temperature in whatever rooms you place the S40-T. This can allow you to prioritize high-priority rooms, such as an office, or baby room, to ensure your temperature and humidity levels are within the tolerance you set. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnecting the ADC-S40-T to your Alarm.com account is simple and swift using Alarm.com's install wizards available in-app, and through the computer portal. Once connected to Alarm.com you will be able to view temp and humidity wherever the device is placed. After enrollment, you can tie the S40-T to your enrolled Alarm.com thermostat and create special automation rules to regulate your home's temperature. You are also able to set up notifications through Alarm.com to alert you in the event the S40-T detects high humidity or an incorrect temperature reading. One thing to keep in mind with Z-wave devices is signal strength though, so if your Z-wave controller is too far from the room you wish to place the S40-T, you will need to add a Z-wave signal-repeating device to ensure solid signal strength. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eImportant: You MUST have an Alarm.com automation service to use this device, meaning you will need a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\" target=\"_blank\"\u003eResidential\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\" target=\"_blank\"\u003eCommercial\u003c\/a\u003e Alarm.com plan that supports automation. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBattery power:\u003cspan\u003e \u003c\/span\u003e5+ years\u003cbr\u003eDimensions:\u003cspan\u003e \u003c\/span\u003e1.2 x 1.6 x 0.47’’ (30.8 x 40.8 x 11.9 mm)\u003cbr\u003eCommunication:\u003cspan\u003e \u003c\/span\u003eZ-Wave SmartStart Z-Wave S2 Authenticated\/Unauthenticated\u003cbr\u003eOperating Temperature Range:\u003cspan\u003e \u003c\/span\u003e14°F to 158°F (-10°C to 70°C)\u003cbr\u003eOperating humidity:\u003cspan\u003e \u003c\/span\u003e80% (non-condensing)\u003cbr\u003eUse:\u003cspan\u003e \u003c\/span\u003eIndoor\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/S40-T_guide11.pdf?v=1670003656\" title=\"Alarm.com S40-T Temperature and Humidity sensor installation guide\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADC-S40-T Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC-S40-T_DataSheet_Final-1.pdf?v=1670003656\" title=\"ADC-S40-T temperature and humidity sensor Data Sheet\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADC-S40-T Data Sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2022-12-07T19:07:34-05:00","created_at":"2022-12-02T10:55:28-05:00","vendor":"Alarm.com","type":"Z-Wave Thermostats","tags":["ADC temperature sensor","ADC thermostat","ADC-S40-T","Alarm.com temperature","Alarm.com thermostat","S40-T"],"price":3350,"price_min":3350,"price_max":3350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44037911380288,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-S40-T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-S40-T Temperature - Humidity Sensor","public_title":null,"options":["Default Title"],"price":3350,"weight":227,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"ADC-S40-T","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-624864.jpg?v=1670519000","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-963803.jpg?v=1670519000","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-711920.jpg?v=1670519000"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-624864.jpg?v=1670519000","options":["Title"],"media":[{"alt":"Alarm.com ADC-S40-T Temperature - Humidity Sensor - AlarmSystemStore.com","id":32383874236736,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-624864.jpg?v=1670519000"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-624864.jpg?v=1670519000","width":1600},{"alt":"Alarm.com ADC-S40-T Temperature - Humidity Sensor - AlarmSystemStore.com","id":32383874269504,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-963803.jpg?v=1670519000"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-963803.jpg?v=1670519000","width":1600},{"alt":"Alarm.com ADC-S40-T Temperature - Humidity Sensor - AlarmSystemStore.com","id":32383874302272,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-711920.jpg?v=1670519000"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-711920.jpg?v=1670519000","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlarm.com ADC-S40-T Temperature - Humidity Sensor\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ADC-S40-T is a temperature and humidity sensor designed for Alarm.com automation services. Using this sensor, you are able to monitor both the temperature and humidity in any room in your home or business remotely using the Alarm.com app or computer portal. The ADC-S40-T connects to your Alarm.com account using Z-wave technology and offers both authorized S2 and unauthorized S2 communication. When paired with an Alarm.com thermostat, such as the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-adc-t40k-hd-smart-color-touchscreen-thermostat\" target=\"_blank\"\u003eADC-T40K-HD\u003c\/a\u003e, the thermostat will use the S40-T to better normalize temperature in whatever rooms you place the S40-T. This can allow you to prioritize high-priority rooms, such as an office, or baby room, to ensure your temperature and humidity levels are within the tolerance you set. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnecting the ADC-S40-T to your Alarm.com account is simple and swift using Alarm.com's install wizards available in-app, and through the computer portal. Once connected to Alarm.com you will be able to view temp and humidity wherever the device is placed. After enrollment, you can tie the S40-T to your enrolled Alarm.com thermostat and create special automation rules to regulate your home's temperature. You are also able to set up notifications through Alarm.com to alert you in the event the S40-T detects high humidity or an incorrect temperature reading. One thing to keep in mind with Z-wave devices is signal strength though, so if your Z-wave controller is too far from the room you wish to place the S40-T, you will need to add a Z-wave signal-repeating device to ensure solid signal strength. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eImportant: You MUST have an Alarm.com automation service to use this device, meaning you will need a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\" target=\"_blank\"\u003eResidential\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\" target=\"_blank\"\u003eCommercial\u003c\/a\u003e Alarm.com plan that supports automation. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBattery power:\u003cspan\u003e \u003c\/span\u003e5+ years\u003cbr\u003eDimensions:\u003cspan\u003e \u003c\/span\u003e1.2 x 1.6 x 0.47’’ (30.8 x 40.8 x 11.9 mm)\u003cbr\u003eCommunication:\u003cspan\u003e \u003c\/span\u003eZ-Wave SmartStart Z-Wave S2 Authenticated\/Unauthenticated\u003cbr\u003eOperating Temperature Range:\u003cspan\u003e \u003c\/span\u003e14°F to 158°F (-10°C to 70°C)\u003cbr\u003eOperating humidity:\u003cspan\u003e \u003c\/span\u003e80% (non-condensing)\u003cbr\u003eUse:\u003cspan\u003e \u003c\/span\u003eIndoor\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/S40-T_guide11.pdf?v=1670003656\" title=\"Alarm.com S40-T Temperature and Humidity sensor installation guide\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADC-S40-T Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC-S40-T_DataSheet_Final-1.pdf?v=1670003656\" title=\"ADC-S40-T temperature and humidity sensor Data Sheet\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADC-S40-T Data Sheet\u003c\/a\u003e\u003c\/p\u003e"}
$33.50
Alarm.com ADC-S40-T Temperature - Humidity Sensor The ADC-S40-T is a temperature and humidity sensor designed for Alarm.com automation services. Using this sensor, you are able to monitor both the temperature and humidity in any room in your home or business remotely using the Alarm.com app or computer portal. The ADC-S40-T connects to your Alarm.com account using Z-wave technology and offers both authorized S2 and unauthorized S2 communication. When paired with an Alarm.com thermostat, such as the ADC-T40K-HD, the thermostat will use the S40-T to better normalize temperature in whatever rooms you place the S40-T. This can allow you to prioritize high-priority rooms, such as an office, or baby room, to ensure your temperature and humidity levels are within the tolerance you set. Connecting the ADC-S40-T to your Alarm.com account is simple and swift using Alarm.com's install wizards available in-app, and through the computer portal. Once connected to Alarm.com you will...
Alarm.com ADC-S40-T Temperature - Humidity Sensor The ADC-S40-T is a temperature and humidity sensor designed for Alarm.com automation services. Using...
-
{"id":8042179297600,"title":"Alarm.com ADC-S40-T Temperature - Humidity Sensor","handle":"alarm-com-adc-s40-t-temperature-humidity-sensor","description":"\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlarm.com ADC-S40-T Temperature - Humidity Sensor\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ADC-S40-T is a temperature and humidity sensor designed for Alarm.com automation services. Using this sensor, you are able to monitor both the temperature and humidity in any room in your home or business remotely using the Alarm.com app or computer portal. The ADC-S40-T connects to your Alarm.com account using Z-wave technology and offers both authorized S2 and unauthorized S2 communication. When paired with an Alarm.com thermostat, such as the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-adc-t40k-hd-smart-color-touchscreen-thermostat\" target=\"_blank\"\u003eADC-T40K-HD\u003c\/a\u003e, the thermostat will use the S40-T to better normalize temperature in whatever rooms you place the S40-T. This can allow you to prioritize high-priority rooms, such as an office, or baby room, to ensure your temperature and humidity levels are within the tolerance you set. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnecting the ADC-S40-T to your Alarm.com account is simple and swift using Alarm.com's install wizards available in-app, and through the computer portal. Once connected to Alarm.com you will be able to view temp and humidity wherever the device is placed. After enrollment, you can tie the S40-T to your enrolled Alarm.com thermostat and create special automation rules to regulate your home's temperature. You are also able to set up notifications through Alarm.com to alert you in the event the S40-T detects high humidity or an incorrect temperature reading. One thing to keep in mind with Z-wave devices is signal strength though, so if your Z-wave controller is too far from the room you wish to place the S40-T, you will need to add a Z-wave signal-repeating device to ensure solid signal strength. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eImportant: You MUST have an Alarm.com automation service to use this device, meaning you will need a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\" target=\"_blank\"\u003eResidential\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\" target=\"_blank\"\u003eCommercial\u003c\/a\u003e Alarm.com plan that supports automation. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBattery power:\u003cspan\u003e \u003c\/span\u003e5+ years\u003cbr\u003eDimensions:\u003cspan\u003e \u003c\/span\u003e1.2 x 1.6 x 0.47’’ (30.8 x 40.8 x 11.9 mm)\u003cbr\u003eCommunication:\u003cspan\u003e \u003c\/span\u003eZ-Wave SmartStart Z-Wave S2 Authenticated\/Unauthenticated\u003cbr\u003eOperating Temperature Range:\u003cspan\u003e \u003c\/span\u003e14°F to 158°F (-10°C to 70°C)\u003cbr\u003eOperating humidity:\u003cspan\u003e \u003c\/span\u003e80% (non-condensing)\u003cbr\u003eUse:\u003cspan\u003e \u003c\/span\u003eIndoor\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/S40-T_guide11.pdf?v=1670003656\" title=\"Alarm.com S40-T Temperature and Humidity sensor installation guide\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADC-S40-T Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC-S40-T_DataSheet_Final-1.pdf?v=1670003656\" title=\"ADC-S40-T temperature and humidity sensor Data Sheet\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADC-S40-T Data Sheet\u003c\/a\u003e\u003c\/p\u003e","published_at":"2022-12-07T19:07:34-05:00","created_at":"2022-12-02T10:55:28-05:00","vendor":"Alarm.com","type":"Z-Wave Thermostats","tags":["ADC temperature sensor","ADC thermostat","ADC-S40-T","Alarm.com temperature","Alarm.com thermostat","S40-T"],"price":3350,"price_min":3350,"price_max":3350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44037911380288,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-S40-T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-S40-T Temperature - Humidity Sensor","public_title":null,"options":["Default Title"],"price":3350,"weight":227,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"ADC-S40-T","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-624864.jpg?v=1670519000","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-963803.jpg?v=1670519000","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-711920.jpg?v=1670519000"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-624864.jpg?v=1670519000","options":["Title"],"media":[{"alt":"Alarm.com ADC-S40-T Temperature - Humidity Sensor - AlarmSystemStore.com","id":32383874236736,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-624864.jpg?v=1670519000"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-624864.jpg?v=1670519000","width":1600},{"alt":"Alarm.com ADC-S40-T Temperature - Humidity Sensor - AlarmSystemStore.com","id":32383874269504,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-963803.jpg?v=1670519000"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-963803.jpg?v=1670519000","width":1600},{"alt":"Alarm.com ADC-S40-T Temperature - Humidity Sensor - AlarmSystemStore.com","id":32383874302272,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-711920.jpg?v=1670519000"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-s40-t-temperature-humidity-sensor-711920.jpg?v=1670519000","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlarm.com ADC-S40-T Temperature - Humidity Sensor\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ADC-S40-T is a temperature and humidity sensor designed for Alarm.com automation services. Using this sensor, you are able to monitor both the temperature and humidity in any room in your home or business remotely using the Alarm.com app or computer portal. The ADC-S40-T connects to your Alarm.com account using Z-wave technology and offers both authorized S2 and unauthorized S2 communication. When paired with an Alarm.com thermostat, such as the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-adc-t40k-hd-smart-color-touchscreen-thermostat\" target=\"_blank\"\u003eADC-T40K-HD\u003c\/a\u003e, the thermostat will use the S40-T to better normalize temperature in whatever rooms you place the S40-T. This can allow you to prioritize high-priority rooms, such as an office, or baby room, to ensure your temperature and humidity levels are within the tolerance you set. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnecting the ADC-S40-T to your Alarm.com account is simple and swift using Alarm.com's install wizards available in-app, and through the computer portal. Once connected to Alarm.com you will be able to view temp and humidity wherever the device is placed. After enrollment, you can tie the S40-T to your enrolled Alarm.com thermostat and create special automation rules to regulate your home's temperature. You are also able to set up notifications through Alarm.com to alert you in the event the S40-T detects high humidity or an incorrect temperature reading. One thing to keep in mind with Z-wave devices is signal strength though, so if your Z-wave controller is too far from the room you wish to place the S40-T, you will need to add a Z-wave signal-repeating device to ensure solid signal strength. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eImportant: You MUST have an Alarm.com automation service to use this device, meaning you will need a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\" target=\"_blank\"\u003eResidential\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\" target=\"_blank\"\u003eCommercial\u003c\/a\u003e Alarm.com plan that supports automation. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBattery power:\u003cspan\u003e \u003c\/span\u003e5+ years\u003cbr\u003eDimensions:\u003cspan\u003e \u003c\/span\u003e1.2 x 1.6 x 0.47’’ (30.8 x 40.8 x 11.9 mm)\u003cbr\u003eCommunication:\u003cspan\u003e \u003c\/span\u003eZ-Wave SmartStart Z-Wave S2 Authenticated\/Unauthenticated\u003cbr\u003eOperating Temperature Range:\u003cspan\u003e \u003c\/span\u003e14°F to 158°F (-10°C to 70°C)\u003cbr\u003eOperating humidity:\u003cspan\u003e \u003c\/span\u003e80% (non-condensing)\u003cbr\u003eUse:\u003cspan\u003e \u003c\/span\u003eIndoor\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/S40-T_guide11.pdf?v=1670003656\" title=\"Alarm.com S40-T Temperature and Humidity sensor installation guide\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADC-S40-T Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC-S40-T_DataSheet_Final-1.pdf?v=1670003656\" title=\"ADC-S40-T temperature and humidity sensor Data Sheet\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADC-S40-T Data Sheet\u003c\/a\u003e\u003c\/p\u003e"}

-
{"id":7037322821,"title":"Alarm.com ADC-T2000 Smart Thermostat","handle":"alarm-com-smart-thermostat","description":"\u003ch2\u003eAlarm.com ADC-T2000 Smart Thermostat\u003c\/h2\u003e\n\u003cp\u003eThis includes:\u003c\/p\u003e\n\u003cp\u003eAlarm.com Smart Thermostat\u003cbr\u003e Installation Guide\u003cbr\u003e 4 AA Batteries\u003cbr\u003e 3 Screws\u003cbr\u003e 3 Drywall anchors\u003cbr\u003e Wire labels\u003cbr\u003e \u003cbr\u003e The Alarm.com ADC-T2000 Smart Thermostat can be used to replace any existing thermostat in your home giving you a new level of control of the energy usage in your home. The thermostat has a mode button, up and down buttons, mode and temperature display and a display for the radio signal strength. To install the Alarm.com Smart Thermostat; all one needs to do is remove the old thermostat your replacing. You must be sure to mark which wires are which while removing the old one. You will then install the new back plate by running the marked wires through it and securing it to the wall with the included screws. You'll then wire it in by following the wiring labels on the Smart Thermostat. It can replace most standard thermostats as it has inputs for Y, G, C, W, O\/B and R wiring schematics. The thermostat is flexible for power as well since it can be powered by batteries or directly from the HVAC power wiring.\u003cbr\u003e \u003cbr\u003e The Alarm.com Smart Thermostat can help you save money and better provide climate control for your home. By using \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\" title=\"Alarm.com Residential Interactive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Residential Interactive\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\" title=\"Alarm.com Commercial Interactive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Commercial Interactive\u003c\/a\u003e services; you can set scenes for it to automatically adjust temperatures based on time or trigger events. By placing temperature sensors in each room you will be able to adjust the temperature of that room independently of all other rooms. This will help save energy by letting shut off or lower the heating or cooling in certain rooms of the home or business. Another energy saving feature you'll get with \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" title=\"Alarm.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com\u003c\/a\u003e and their thermostats is the ability for them to adjust automatically based on your proximity from your home or office. This is called Geotagging and it means that based on your location the thermostats can automatically adjust the temperature of the building so you can come in to a comfortable climate upon entering the building.\u003cbr\u003e \u003cbr\u003e One of the reasons this is called a Smart Thermostat is because it can receive information from other \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\" title=\"Z-Wave devices\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eZ-Wave devices\u003c\/a\u003e around the home or business and adjust its operation based on the information that it receives. If you're using a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/ademco-vista-15p\" title=\"Honeywell Vista 15p\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHoneywell Vista 15p\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/ademco-honeywell-vista-20p-kits\" title=\"Honeywell Vista 20P\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHoneywell Vista 20P\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" title=\"DSC NEO Series\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO Series\u003c\/a\u003e alarm systems; the smart thermostat can interact with triggered automation events causing it to adjust to levels based on what is happening with the security system or any other device. This can be accomplished by using Alarm.com Interactive Services and either the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/adc-sem300-vz-vt\" title=\"Honeywell SEM\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSEM\u003c\/a\u003e module for the Honeywell Systems or the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-communicators\" title=\"DSC NEO 8080 Cellular communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 8080 Cellular communicator\u003c\/a\u003e models. And with Alarm.com's mobile app youll have the control at your at your fingertips.\u003cbr\u003e \u003cbr\u003e The Alarm.com Smart Thermostat can offer you a degree of control that will allow you to keep your house comfortable and help you save money on bills at the end of the month. Along with our other Z-Wave devices we offer on the site; you'll be able to turn your home or business into a money saving powerhouse that can almost run itself with the right setup and programming.\u003c\/p\u003e","published_at":"2016-10-20T02:44:00-04:00","created_at":"2017-01-23T07:10:45-05:00","vendor":"Alarm.com","type":"Z-Wave Thermostats","tags":["ADC-T2000","ADCT2000","Els PW 22620","T2000","Z-Wave Home Automation","Z-Wave Thermostats"],"price":14295,"price_min":14295,"price_max":14295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526207685,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-T2000-RC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-T2000 Smart Thermostat","public_title":null,"options":["Default Title"],"price":14295,"weight":907,"compare_at_price":null,"inventory_quantity":-28,"inventory_management":null,"inventory_policy":"continue","barcode":"ADC-T2000-RC","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-474136.jpg?v=1595525955","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-742940.jpg?v=1595525955","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-953050.jpg?v=1595525955"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-474136.jpg?v=1595525955","options":["Title"],"media":[{"alt":"Alarm.com ADC-T2000 Smart Thermostat - AlarmSystemStore.com","id":7363070787686,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-474136.jpg?v=1595525955"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-474136.jpg?v=1595525955","width":1024},{"alt":"Alarm.com ADC-T2000 Smart Thermostat - AlarmSystemStore.com","id":7363070820454,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-742940.jpg?v=1595525955"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-742940.jpg?v=1595525955","width":1024},{"alt":"Alarm.com ADC-T2000 Smart Thermostat - AlarmSystemStore.com","id":7363070853222,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-953050.jpg?v=1595525955"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-953050.jpg?v=1595525955","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eAlarm.com ADC-T2000 Smart Thermostat\u003c\/h2\u003e\n\u003cp\u003eThis includes:\u003c\/p\u003e\n\u003cp\u003eAlarm.com Smart Thermostat\u003cbr\u003e Installation Guide\u003cbr\u003e 4 AA Batteries\u003cbr\u003e 3 Screws\u003cbr\u003e 3 Drywall anchors\u003cbr\u003e Wire labels\u003cbr\u003e \u003cbr\u003e The Alarm.com ADC-T2000 Smart Thermostat can be used to replace any existing thermostat in your home giving you a new level of control of the energy usage in your home. The thermostat has a mode button, up and down buttons, mode and temperature display and a display for the radio signal strength. To install the Alarm.com Smart Thermostat; all one needs to do is remove the old thermostat your replacing. You must be sure to mark which wires are which while removing the old one. You will then install the new back plate by running the marked wires through it and securing it to the wall with the included screws. You'll then wire it in by following the wiring labels on the Smart Thermostat. It can replace most standard thermostats as it has inputs for Y, G, C, W, O\/B and R wiring schematics. The thermostat is flexible for power as well since it can be powered by batteries or directly from the HVAC power wiring.\u003cbr\u003e \u003cbr\u003e The Alarm.com Smart Thermostat can help you save money and better provide climate control for your home. By using \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\" title=\"Alarm.com Residential Interactive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Residential Interactive\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\" title=\"Alarm.com Commercial Interactive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Commercial Interactive\u003c\/a\u003e services; you can set scenes for it to automatically adjust temperatures based on time or trigger events. By placing temperature sensors in each room you will be able to adjust the temperature of that room independently of all other rooms. This will help save energy by letting shut off or lower the heating or cooling in certain rooms of the home or business. Another energy saving feature you'll get with \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" title=\"Alarm.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com\u003c\/a\u003e and their thermostats is the ability for them to adjust automatically based on your proximity from your home or office. This is called Geotagging and it means that based on your location the thermostats can automatically adjust the temperature of the building so you can come in to a comfortable climate upon entering the building.\u003cbr\u003e \u003cbr\u003e One of the reasons this is called a Smart Thermostat is because it can receive information from other \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\" title=\"Z-Wave devices\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eZ-Wave devices\u003c\/a\u003e around the home or business and adjust its operation based on the information that it receives. If you're using a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/ademco-vista-15p\" title=\"Honeywell Vista 15p\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHoneywell Vista 15p\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/ademco-honeywell-vista-20p-kits\" title=\"Honeywell Vista 20P\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHoneywell Vista 20P\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" title=\"DSC NEO Series\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO Series\u003c\/a\u003e alarm systems; the smart thermostat can interact with triggered automation events causing it to adjust to levels based on what is happening with the security system or any other device. This can be accomplished by using Alarm.com Interactive Services and either the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/adc-sem300-vz-vt\" title=\"Honeywell SEM\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSEM\u003c\/a\u003e module for the Honeywell Systems or the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-communicators\" title=\"DSC NEO 8080 Cellular communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 8080 Cellular communicator\u003c\/a\u003e models. And with Alarm.com's mobile app youll have the control at your at your fingertips.\u003cbr\u003e \u003cbr\u003e The Alarm.com Smart Thermostat can offer you a degree of control that will allow you to keep your house comfortable and help you save money on bills at the end of the month. Along with our other Z-Wave devices we offer on the site; you'll be able to turn your home or business into a money saving powerhouse that can almost run itself with the right setup and programming.\u003c\/p\u003e"}
$142.95
Alarm.com ADC-T2000 Smart Thermostat This includes: Alarm.com Smart Thermostat Installation Guide 4 AA Batteries 3 Screws 3 Drywall anchors Wire labels The Alarm.com ADC-T2000 Smart Thermostat can be used to replace any existing thermostat in your home giving you a new level of control of the energy usage in your home. The thermostat has a mode button, up and down buttons, mode and temperature display and a display for the radio signal strength. To install the Alarm.com Smart Thermostat; all one needs to do is remove the old thermostat your replacing. You must be sure to mark which wires are which while removing the old one. You will then install the new back plate by running the marked wires through it and securing it to the wall with the included screws. You'll then wire it in by following the wiring labels on the Smart Thermostat. It can replace most standard...
Alarm.com ADC-T2000 Smart Thermostat This includes: Alarm.com Smart Thermostat Installation Guide 4 AA Batteries 3 Screws 3 Drywall anchors Wire...
-
{"id":7037322821,"title":"Alarm.com ADC-T2000 Smart Thermostat","handle":"alarm-com-smart-thermostat","description":"\u003ch2\u003eAlarm.com ADC-T2000 Smart Thermostat\u003c\/h2\u003e\n\u003cp\u003eThis includes:\u003c\/p\u003e\n\u003cp\u003eAlarm.com Smart Thermostat\u003cbr\u003e Installation Guide\u003cbr\u003e 4 AA Batteries\u003cbr\u003e 3 Screws\u003cbr\u003e 3 Drywall anchors\u003cbr\u003e Wire labels\u003cbr\u003e \u003cbr\u003e The Alarm.com ADC-T2000 Smart Thermostat can be used to replace any existing thermostat in your home giving you a new level of control of the energy usage in your home. The thermostat has a mode button, up and down buttons, mode and temperature display and a display for the radio signal strength. To install the Alarm.com Smart Thermostat; all one needs to do is remove the old thermostat your replacing. You must be sure to mark which wires are which while removing the old one. You will then install the new back plate by running the marked wires through it and securing it to the wall with the included screws. You'll then wire it in by following the wiring labels on the Smart Thermostat. It can replace most standard thermostats as it has inputs for Y, G, C, W, O\/B and R wiring schematics. The thermostat is flexible for power as well since it can be powered by batteries or directly from the HVAC power wiring.\u003cbr\u003e \u003cbr\u003e The Alarm.com Smart Thermostat can help you save money and better provide climate control for your home. By using \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\" title=\"Alarm.com Residential Interactive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Residential Interactive\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\" title=\"Alarm.com Commercial Interactive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Commercial Interactive\u003c\/a\u003e services; you can set scenes for it to automatically adjust temperatures based on time or trigger events. By placing temperature sensors in each room you will be able to adjust the temperature of that room independently of all other rooms. This will help save energy by letting shut off or lower the heating or cooling in certain rooms of the home or business. Another energy saving feature you'll get with \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" title=\"Alarm.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com\u003c\/a\u003e and their thermostats is the ability for them to adjust automatically based on your proximity from your home or office. This is called Geotagging and it means that based on your location the thermostats can automatically adjust the temperature of the building so you can come in to a comfortable climate upon entering the building.\u003cbr\u003e \u003cbr\u003e One of the reasons this is called a Smart Thermostat is because it can receive information from other \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\" title=\"Z-Wave devices\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eZ-Wave devices\u003c\/a\u003e around the home or business and adjust its operation based on the information that it receives. If you're using a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/ademco-vista-15p\" title=\"Honeywell Vista 15p\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHoneywell Vista 15p\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/ademco-honeywell-vista-20p-kits\" title=\"Honeywell Vista 20P\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHoneywell Vista 20P\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" title=\"DSC NEO Series\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO Series\u003c\/a\u003e alarm systems; the smart thermostat can interact with triggered automation events causing it to adjust to levels based on what is happening with the security system or any other device. This can be accomplished by using Alarm.com Interactive Services and either the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/adc-sem300-vz-vt\" title=\"Honeywell SEM\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSEM\u003c\/a\u003e module for the Honeywell Systems or the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-communicators\" title=\"DSC NEO 8080 Cellular communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 8080 Cellular communicator\u003c\/a\u003e models. And with Alarm.com's mobile app youll have the control at your at your fingertips.\u003cbr\u003e \u003cbr\u003e The Alarm.com Smart Thermostat can offer you a degree of control that will allow you to keep your house comfortable and help you save money on bills at the end of the month. Along with our other Z-Wave devices we offer on the site; you'll be able to turn your home or business into a money saving powerhouse that can almost run itself with the right setup and programming.\u003c\/p\u003e","published_at":"2016-10-20T02:44:00-04:00","created_at":"2017-01-23T07:10:45-05:00","vendor":"Alarm.com","type":"Z-Wave Thermostats","tags":["ADC-T2000","ADCT2000","Els PW 22620","T2000","Z-Wave Home Automation","Z-Wave Thermostats"],"price":14295,"price_min":14295,"price_max":14295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526207685,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-T2000-RC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-T2000 Smart Thermostat","public_title":null,"options":["Default Title"],"price":14295,"weight":907,"compare_at_price":null,"inventory_quantity":-28,"inventory_management":null,"inventory_policy":"continue","barcode":"ADC-T2000-RC","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-474136.jpg?v=1595525955","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-742940.jpg?v=1595525955","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-953050.jpg?v=1595525955"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-474136.jpg?v=1595525955","options":["Title"],"media":[{"alt":"Alarm.com ADC-T2000 Smart Thermostat - AlarmSystemStore.com","id":7363070787686,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-474136.jpg?v=1595525955"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-474136.jpg?v=1595525955","width":1024},{"alt":"Alarm.com ADC-T2000 Smart Thermostat - AlarmSystemStore.com","id":7363070820454,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-742940.jpg?v=1595525955"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-742940.jpg?v=1595525955","width":1024},{"alt":"Alarm.com ADC-T2000 Smart Thermostat - AlarmSystemStore.com","id":7363070853222,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-953050.jpg?v=1595525955"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-t2000-smart-thermostat-953050.jpg?v=1595525955","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eAlarm.com ADC-T2000 Smart Thermostat\u003c\/h2\u003e\n\u003cp\u003eThis includes:\u003c\/p\u003e\n\u003cp\u003eAlarm.com Smart Thermostat\u003cbr\u003e Installation Guide\u003cbr\u003e 4 AA Batteries\u003cbr\u003e 3 Screws\u003cbr\u003e 3 Drywall anchors\u003cbr\u003e Wire labels\u003cbr\u003e \u003cbr\u003e The Alarm.com ADC-T2000 Smart Thermostat can be used to replace any existing thermostat in your home giving you a new level of control of the energy usage in your home. The thermostat has a mode button, up and down buttons, mode and temperature display and a display for the radio signal strength. To install the Alarm.com Smart Thermostat; all one needs to do is remove the old thermostat your replacing. You must be sure to mark which wires are which while removing the old one. You will then install the new back plate by running the marked wires through it and securing it to the wall with the included screws. You'll then wire it in by following the wiring labels on the Smart Thermostat. It can replace most standard thermostats as it has inputs for Y, G, C, W, O\/B and R wiring schematics. The thermostat is flexible for power as well since it can be powered by batteries or directly from the HVAC power wiring.\u003cbr\u003e \u003cbr\u003e The Alarm.com Smart Thermostat can help you save money and better provide climate control for your home. By using \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\" title=\"Alarm.com Residential Interactive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Residential Interactive\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\" title=\"Alarm.com Commercial Interactive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com Commercial Interactive\u003c\/a\u003e services; you can set scenes for it to automatically adjust temperatures based on time or trigger events. By placing temperature sensors in each room you will be able to adjust the temperature of that room independently of all other rooms. This will help save energy by letting shut off or lower the heating or cooling in certain rooms of the home or business. Another energy saving feature you'll get with \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-services\" title=\"Alarm.com\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAlarm.com\u003c\/a\u003e and their thermostats is the ability for them to adjust automatically based on your proximity from your home or office. This is called Geotagging and it means that based on your location the thermostats can automatically adjust the temperature of the building so you can come in to a comfortable climate upon entering the building.\u003cbr\u003e \u003cbr\u003e One of the reasons this is called a Smart Thermostat is because it can receive information from other \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\" title=\"Z-Wave devices\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eZ-Wave devices\u003c\/a\u003e around the home or business and adjust its operation based on the information that it receives. If you're using a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/ademco-vista-15p\" title=\"Honeywell Vista 15p\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHoneywell Vista 15p\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/ademco-honeywell-vista-20p-kits\" title=\"Honeywell Vista 20P\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHoneywell Vista 20P\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo-kits-packages\" title=\"DSC NEO Series\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO Series\u003c\/a\u003e alarm systems; the smart thermostat can interact with triggered automation events causing it to adjust to levels based on what is happening with the security system or any other device. This can be accomplished by using Alarm.com Interactive Services and either the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/adc-sem300-vz-vt\" title=\"Honeywell SEM\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSEM\u003c\/a\u003e module for the Honeywell Systems or the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-communicators\" title=\"DSC NEO 8080 Cellular communicator\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDSC NEO 8080 Cellular communicator\u003c\/a\u003e models. And with Alarm.com's mobile app youll have the control at your at your fingertips.\u003cbr\u003e \u003cbr\u003e The Alarm.com Smart Thermostat can offer you a degree of control that will allow you to keep your house comfortable and help you save money on bills at the end of the month. Along with our other Z-Wave devices we offer on the site; you'll be able to turn your home or business into a money saving powerhouse that can almost run itself with the right setup and programming.\u003c\/p\u003e"}

-
{"id":6550402990182,"title":"Alarm.com ADC-VDB770 WiFi Video Doorbell","handle":"alarm-com-adc-vdb770-video-doorbell","description":"\u003ch2\u003eAlarm.com ADC-VDB770 WiFi Video Doorbell\u003c\/h2\u003e\n\u003cp\u003eThe ADC-VDB770 Video Doorbell is a magnificent addition to Alarm.com's line of video products. This wifi doorbell has many advanced features and video analytics that make it a top-of-the-line product. It can be added to an existing Alarm.com residential interactive plan or video service to give you access to your front door anytime, from anywhere. This doorbell can even be used in conjunction with Alarm.com's Z-wave automation to give you access to doors, locks, and lights straight from the doorbell call screen on the Alarm.com app.\u003c\/p\u003e\n\u003cp\u003eThis doorbell camera combo is a powerhouse of technology that features improved 2-way audio for real-time communication, full HD 1440x1920 video resolution, a 150°V\/115°H FOV, HDR for incredible image quality and even works up to 15ft in the dead of night with infrared night vision. The camera has many image adjustments that can be made, such as brightness, contrast, sharpness, saturation, and exposure, so that you can customize the camera to work perfectly for you. The VDB770\u003cspan data-mce-fragment=\"1\"\u003e uses video analytics to improve its ability to detect people so that you have fewer false alarms.\u003c\/span\u003e You can watch this camera straight from your Alarm.com app, get notifications before someone even rings the doorbell, and record video and audio clips anytime the camera's video analytics detect motion. This doorbell also features a touchless doorbell option so that your guests can ring the doorbell without ever having to touch the button. \u003c\/p\u003e\n\u003cp\u003eThe power module for this doorbell hooks directly into your existing doorbell chime. You need to have a transformer with a minimum of 16VAC and a minimum power of 10VA. Then hook the VDB770 directly into where your old doorbell was using the correctly angled mounting bracket. Once the new doorbell is installed, find it using a Wi-Fi-capable device such as a smartphone or computer and enjoy the benefits of this incredible video doorbell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIMPORTANT: \u003c\/strong\u003eThe ADC-VDB770 can be added to an existing alarm.com interactive plan using the \"Doorbell with Video Analytics\" service. If you do not have an existing interactive service plan, you must purchase the Alarm.com Pro Video package with video analytics to be able to use this device as intended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eADC-VDB770 Doorbell camera\u003c\/li\u003e\n\u003cli\u003ePower module\u003c\/li\u003e\n\u003cli\u003e3 mounting brackets\u003c\/li\u003e\n\u003cli\u003ewire extenders\u003c\/li\u003e\n\u003cli\u003ewire connectors \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1440x1920 HD resolution\u003c\/li\u003e\n\u003cli\u003eHDR imaging\u003c\/li\u003e\n\u003cli\u003e150° vertical\/ 115° horizontal camera lens angle\u003c\/li\u003e\n\u003cli\u003e15ft Infrared range\u003c\/li\u003e\n\u003cli\u003eWireless connectivity: \u003cspan data-mce-fragment=\"1\"\u003e802.11 b\/g\/n\/ac, 2.4 GHz \u0026amp; 5 GHz\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature: \u003cspan data-mce-fragment=\"1\"\u003e-22° F-104° F\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions: 1.7in x 5in x 1.5in\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum power requirements:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAC: 16-30VAC\/10-30VA\u003c\/li\u003e\n\u003cli\u003eDC: \u003cspan data-mce-fragment=\"1\"\u003e15-30V DC\/8W\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-04-21T14:11:50-04:00","created_at":"2021-03-24T17:07:48-04:00","vendor":"Alarm.com","type":"Alarm.com Video Cameras","tags":["770","Alarm.com Video Cameras","Doorbell","doorbell camera","Els PW 22620","vdb770","video doorbell"],"price":19995,"price_min":19995,"price_max":19995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39275917770854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-VDB770","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-VDB770 WiFi Video Doorbell","public_title":null,"options":["Default Title"],"price":19995,"weight":907,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"continue","barcode":"ADC-VDB770","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-951490.jpg?v=1679690834","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-829291.jpg?v=1686329558","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-417564.jpg?v=1686329558","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-822715.jpg?v=1686329558","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-285145.jpg?v=1686329558","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-331289.jpg?v=1686329556"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-951490.jpg?v=1679690834","options":["Title"],"media":[{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":33233763238208,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-951490.jpg?v=1679690834"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-951490.jpg?v=1679690834","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815834214,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-829291.jpg?v=1686329558"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-829291.jpg?v=1686329558","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815866982,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-417564.jpg?v=1686329558"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-417564.jpg?v=1686329558","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815768678,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-822715.jpg?v=1686329558"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-822715.jpg?v=1686329558","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815703142,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-285145.jpg?v=1686329558"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-285145.jpg?v=1686329558","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815801446,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-331289.jpg?v=1686329556"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-331289.jpg?v=1686329556","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eAlarm.com ADC-VDB770 WiFi Video Doorbell\u003c\/h2\u003e\n\u003cp\u003eThe ADC-VDB770 Video Doorbell is a magnificent addition to Alarm.com's line of video products. This wifi doorbell has many advanced features and video analytics that make it a top-of-the-line product. It can be added to an existing Alarm.com residential interactive plan or video service to give you access to your front door anytime, from anywhere. This doorbell can even be used in conjunction with Alarm.com's Z-wave automation to give you access to doors, locks, and lights straight from the doorbell call screen on the Alarm.com app.\u003c\/p\u003e\n\u003cp\u003eThis doorbell camera combo is a powerhouse of technology that features improved 2-way audio for real-time communication, full HD 1440x1920 video resolution, a 150°V\/115°H FOV, HDR for incredible image quality and even works up to 15ft in the dead of night with infrared night vision. The camera has many image adjustments that can be made, such as brightness, contrast, sharpness, saturation, and exposure, so that you can customize the camera to work perfectly for you. The VDB770\u003cspan data-mce-fragment=\"1\"\u003e uses video analytics to improve its ability to detect people so that you have fewer false alarms.\u003c\/span\u003e You can watch this camera straight from your Alarm.com app, get notifications before someone even rings the doorbell, and record video and audio clips anytime the camera's video analytics detect motion. This doorbell also features a touchless doorbell option so that your guests can ring the doorbell without ever having to touch the button. \u003c\/p\u003e\n\u003cp\u003eThe power module for this doorbell hooks directly into your existing doorbell chime. You need to have a transformer with a minimum of 16VAC and a minimum power of 10VA. Then hook the VDB770 directly into where your old doorbell was using the correctly angled mounting bracket. Once the new doorbell is installed, find it using a Wi-Fi-capable device such as a smartphone or computer and enjoy the benefits of this incredible video doorbell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIMPORTANT: \u003c\/strong\u003eThe ADC-VDB770 can be added to an existing alarm.com interactive plan using the \"Doorbell with Video Analytics\" service. If you do not have an existing interactive service plan, you must purchase the Alarm.com Pro Video package with video analytics to be able to use this device as intended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eADC-VDB770 Doorbell camera\u003c\/li\u003e\n\u003cli\u003ePower module\u003c\/li\u003e\n\u003cli\u003e3 mounting brackets\u003c\/li\u003e\n\u003cli\u003ewire extenders\u003c\/li\u003e\n\u003cli\u003ewire connectors \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1440x1920 HD resolution\u003c\/li\u003e\n\u003cli\u003eHDR imaging\u003c\/li\u003e\n\u003cli\u003e150° vertical\/ 115° horizontal camera lens angle\u003c\/li\u003e\n\u003cli\u003e15ft Infrared range\u003c\/li\u003e\n\u003cli\u003eWireless connectivity: \u003cspan data-mce-fragment=\"1\"\u003e802.11 b\/g\/n\/ac, 2.4 GHz \u0026amp; 5 GHz\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature: \u003cspan data-mce-fragment=\"1\"\u003e-22° F-104° F\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions: 1.7in x 5in x 1.5in\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum power requirements:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAC: 16-30VAC\/10-30VA\u003c\/li\u003e\n\u003cli\u003eDC: \u003cspan data-mce-fragment=\"1\"\u003e15-30V DC\/8W\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$199.95
Alarm.com ADC-VDB770 WiFi Video Doorbell The ADC-VDB770 Video Doorbell is a magnificent addition to Alarm.com's line of video products. This wifi doorbell has many advanced features and video analytics that make it a top-of-the-line product. It can be added to an existing Alarm.com residential interactive plan or video service to give you access to your front door anytime, from anywhere. This doorbell can even be used in conjunction with Alarm.com's Z-wave automation to give you access to doors, locks, and lights straight from the doorbell call screen on the Alarm.com app. This doorbell camera combo is a powerhouse of technology that features improved 2-way audio for real-time communication, full HD 1440x1920 video resolution, a 150°V/115°H FOV, HDR for incredible image quality and even works up to 15ft in the dead of night with infrared night vision. The camera has many image adjustments that can be made, such as brightness, contrast, sharpness,...
Alarm.com ADC-VDB770 WiFi Video Doorbell The ADC-VDB770 Video Doorbell is a magnificent addition to Alarm.com's line of video products. This...
-
{"id":6550402990182,"title":"Alarm.com ADC-VDB770 WiFi Video Doorbell","handle":"alarm-com-adc-vdb770-video-doorbell","description":"\u003ch2\u003eAlarm.com ADC-VDB770 WiFi Video Doorbell\u003c\/h2\u003e\n\u003cp\u003eThe ADC-VDB770 Video Doorbell is a magnificent addition to Alarm.com's line of video products. This wifi doorbell has many advanced features and video analytics that make it a top-of-the-line product. It can be added to an existing Alarm.com residential interactive plan or video service to give you access to your front door anytime, from anywhere. This doorbell can even be used in conjunction with Alarm.com's Z-wave automation to give you access to doors, locks, and lights straight from the doorbell call screen on the Alarm.com app.\u003c\/p\u003e\n\u003cp\u003eThis doorbell camera combo is a powerhouse of technology that features improved 2-way audio for real-time communication, full HD 1440x1920 video resolution, a 150°V\/115°H FOV, HDR for incredible image quality and even works up to 15ft in the dead of night with infrared night vision. The camera has many image adjustments that can be made, such as brightness, contrast, sharpness, saturation, and exposure, so that you can customize the camera to work perfectly for you. The VDB770\u003cspan data-mce-fragment=\"1\"\u003e uses video analytics to improve its ability to detect people so that you have fewer false alarms.\u003c\/span\u003e You can watch this camera straight from your Alarm.com app, get notifications before someone even rings the doorbell, and record video and audio clips anytime the camera's video analytics detect motion. This doorbell also features a touchless doorbell option so that your guests can ring the doorbell without ever having to touch the button. \u003c\/p\u003e\n\u003cp\u003eThe power module for this doorbell hooks directly into your existing doorbell chime. You need to have a transformer with a minimum of 16VAC and a minimum power of 10VA. Then hook the VDB770 directly into where your old doorbell was using the correctly angled mounting bracket. Once the new doorbell is installed, find it using a Wi-Fi-capable device such as a smartphone or computer and enjoy the benefits of this incredible video doorbell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIMPORTANT: \u003c\/strong\u003eThe ADC-VDB770 can be added to an existing alarm.com interactive plan using the \"Doorbell with Video Analytics\" service. If you do not have an existing interactive service plan, you must purchase the Alarm.com Pro Video package with video analytics to be able to use this device as intended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eADC-VDB770 Doorbell camera\u003c\/li\u003e\n\u003cli\u003ePower module\u003c\/li\u003e\n\u003cli\u003e3 mounting brackets\u003c\/li\u003e\n\u003cli\u003ewire extenders\u003c\/li\u003e\n\u003cli\u003ewire connectors \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1440x1920 HD resolution\u003c\/li\u003e\n\u003cli\u003eHDR imaging\u003c\/li\u003e\n\u003cli\u003e150° vertical\/ 115° horizontal camera lens angle\u003c\/li\u003e\n\u003cli\u003e15ft Infrared range\u003c\/li\u003e\n\u003cli\u003eWireless connectivity: \u003cspan data-mce-fragment=\"1\"\u003e802.11 b\/g\/n\/ac, 2.4 GHz \u0026amp; 5 GHz\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature: \u003cspan data-mce-fragment=\"1\"\u003e-22° F-104° F\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions: 1.7in x 5in x 1.5in\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum power requirements:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAC: 16-30VAC\/10-30VA\u003c\/li\u003e\n\u003cli\u003eDC: \u003cspan data-mce-fragment=\"1\"\u003e15-30V DC\/8W\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-04-21T14:11:50-04:00","created_at":"2021-03-24T17:07:48-04:00","vendor":"Alarm.com","type":"Alarm.com Video Cameras","tags":["770","Alarm.com Video Cameras","Doorbell","doorbell camera","Els PW 22620","vdb770","video doorbell"],"price":19995,"price_min":19995,"price_max":19995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39275917770854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ADC-VDB770","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Alarm.com ADC-VDB770 WiFi Video Doorbell","public_title":null,"options":["Default Title"],"price":19995,"weight":907,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"continue","barcode":"ADC-VDB770","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-951490.jpg?v=1679690834","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-829291.jpg?v=1686329558","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-417564.jpg?v=1686329558","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-822715.jpg?v=1686329558","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-285145.jpg?v=1686329558","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-331289.jpg?v=1686329556"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-951490.jpg?v=1679690834","options":["Title"],"media":[{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":33233763238208,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-951490.jpg?v=1679690834"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-951490.jpg?v=1679690834","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815834214,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-829291.jpg?v=1686329558"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-829291.jpg?v=1686329558","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815866982,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-417564.jpg?v=1686329558"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-417564.jpg?v=1686329558","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815768678,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-822715.jpg?v=1686329558"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-822715.jpg?v=1686329558","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815703142,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-285145.jpg?v=1686329558"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-285145.jpg?v=1686329558","width":1024},{"alt":"Alarm.com ADC-VDB770 WiFi Video Doorbell - AlarmSystemStore.com","id":20502815801446,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-331289.jpg?v=1686329556"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/alarmcom-adc-vdb770-wifi-video-doorbell-331289.jpg?v=1686329556","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eAlarm.com ADC-VDB770 WiFi Video Doorbell\u003c\/h2\u003e\n\u003cp\u003eThe ADC-VDB770 Video Doorbell is a magnificent addition to Alarm.com's line of video products. This wifi doorbell has many advanced features and video analytics that make it a top-of-the-line product. It can be added to an existing Alarm.com residential interactive plan or video service to give you access to your front door anytime, from anywhere. This doorbell can even be used in conjunction with Alarm.com's Z-wave automation to give you access to doors, locks, and lights straight from the doorbell call screen on the Alarm.com app.\u003c\/p\u003e\n\u003cp\u003eThis doorbell camera combo is a powerhouse of technology that features improved 2-way audio for real-time communication, full HD 1440x1920 video resolution, a 150°V\/115°H FOV, HDR for incredible image quality and even works up to 15ft in the dead of night with infrared night vision. The camera has many image adjustments that can be made, such as brightness, contrast, sharpness, saturation, and exposure, so that you can customize the camera to work perfectly for you. The VDB770\u003cspan data-mce-fragment=\"1\"\u003e uses video analytics to improve its ability to detect people so that you have fewer false alarms.\u003c\/span\u003e You can watch this camera straight from your Alarm.com app, get notifications before someone even rings the doorbell, and record video and audio clips anytime the camera's video analytics detect motion. This doorbell also features a touchless doorbell option so that your guests can ring the doorbell without ever having to touch the button. \u003c\/p\u003e\n\u003cp\u003eThe power module for this doorbell hooks directly into your existing doorbell chime. You need to have a transformer with a minimum of 16VAC and a minimum power of 10VA. Then hook the VDB770 directly into where your old doorbell was using the correctly angled mounting bracket. Once the new doorbell is installed, find it using a Wi-Fi-capable device such as a smartphone or computer and enjoy the benefits of this incredible video doorbell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIMPORTANT: \u003c\/strong\u003eThe ADC-VDB770 can be added to an existing alarm.com interactive plan using the \"Doorbell with Video Analytics\" service. If you do not have an existing interactive service plan, you must purchase the Alarm.com Pro Video package with video analytics to be able to use this device as intended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eADC-VDB770 Doorbell camera\u003c\/li\u003e\n\u003cli\u003ePower module\u003c\/li\u003e\n\u003cli\u003e3 mounting brackets\u003c\/li\u003e\n\u003cli\u003ewire extenders\u003c\/li\u003e\n\u003cli\u003ewire connectors \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1440x1920 HD resolution\u003c\/li\u003e\n\u003cli\u003eHDR imaging\u003c\/li\u003e\n\u003cli\u003e150° vertical\/ 115° horizontal camera lens angle\u003c\/li\u003e\n\u003cli\u003e15ft Infrared range\u003c\/li\u003e\n\u003cli\u003eWireless connectivity: \u003cspan data-mce-fragment=\"1\"\u003e802.11 b\/g\/n\/ac, 2.4 GHz \u0026amp; 5 GHz\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature: \u003cspan data-mce-fragment=\"1\"\u003e-22° F-104° F\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions: 1.7in x 5in x 1.5in\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum power requirements:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAC: 16-30VAC\/10-30VA\u003c\/li\u003e\n\u003cli\u003eDC: \u003cspan data-mce-fragment=\"1\"\u003e15-30V DC\/8W\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}



