BNC Twist on Type RG59 – 2106 This BNC twist on type connector is a replacement for the two-piece BNC crimp on connector. This will make making video cables an easy task and get you up and running faster than having to manually crimp on connectors to new cable.These BNC Connectors work great with our Bulk RG59+Power Siamese Cable 500 ft.

Bulk RG59+Power Siamese Cable 500 ft.This RG59 Siamese Cable is great for those of you who want an easy solution for your video surveillance needs. The cable contains a 75 ohm RG59 coaxial cable that has two forms of shielding, an aluminum foil shield and a 95% braided wire shielding, and 18 guage power wires to supply your cameras power.Now you have all you need for your cameras rolled into one cable and this cable is great when coupled with our BNC Twist-On Connectors. Dual Shielding 500' of RG59 + Power Siamese Cable Great for surveillance, BNC connections 18 AWG (power) and 20 AWG CCA (RG59) CM Jacket (in-wall installation approved) 95% Copper Braid Shielding

LTS POE-SW401 4-Port 100Mbps Unmanaged PoE Switch The LTS POE-SW401 is a multi-port, 4 port, Power over Ethernet switch that will power your hardline ethernet IP cameras. This will provide 30 watts of power for each port. You are able to do an ethernet cable run of up to 820 ft without any loss in quality. This PoE switch also provides 4kV of surge protection for the ports. You'll get transfer speeds of visual data up to 100Mbps. This also features 448 Kbits of RAM buffer as well. If you don't want to buy a PoE switch for each of your four cameras then this is a more economic route to take. IEEE 802.3at and IEEE802.3af PoE compliant Distance up to 820ft Extend mode up to 820ft 4 PoE Ports + 1 Uplink Provides up to 30 watts per PoE port Supports PoE power up to 58W for all ports...