AlarmSystemStore.com BBB Business Review

LIN-WD500Z1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

Quick Overview
LIN-WD500Z1 Z-Wave 500-Watt Wall-Mount Dimmer Switch The WD500Z-1 is a wall mountable dimmer switch that can be installed in any home. With this module you will be able to provide...

Available : In Stock

$34.95

Ship out same day
or within 24 hours
Add to Wishlist

LIN-WD500Z1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

The WD500Z-1 is a wall mountable dimmer switch that can be installed in any home. With this module you will be able to provide you with control of any lights on the circuit which the module is installed on. The module can be wired in just as easily as any other dimming unit and has the added feature of acting as a repeater for the Z-Wave network in your home. This module does have a load limit of 500 watts so be aware of this when installing it for control of lighting. This unit also includes the patented Nortek Auto-Sense feature that will allow independent control of lighting regardless if a scene is set in your control unit.

Installing this means that you will be working with electrical wiring so be sure to be safe and turn off the electrical circuit breaker to the line you're working on. After that you’ll connect the wiring in from your previous switch to the WD500Z-1. After all wiring has been securely and safely done you can learn the module in by setting your control to discover mode and then switching the switch to the on position.

Specifications:

Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles)
Signal (Frequency): 908.42 MHz
Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
Input: 120v 15A 60Hz
Network wide inclusion
Scene: Command class
Security beaming
Requires a Neutral
Auto-Sense feature built-in

Features

Extended Information