AlarmSystemStore.com BBB Business Review

Customer Reviews

No reviews yet Write a review

Interlogix SDX-135Z Wireless Smoke Detector with Heat and Freeze Sensor

Quick Overview
Interlogix SDX-135Z Wireless Smoke Detector with Heat and Freeze Sensor  The Interlogix SDX-135Z is a wireless smoke detector that has a built-in heat and freeze sensor. It can be used with...

$89.95

Ship out same day or within 24 hours
Add to Wishlist

Interlogix SDX-135Z Wireless Smoke Detector with Heat and Freeze Sensor

 The Interlogix SDX-135Z is a wireless smoke detector that has a built-in heat and freeze sensor. It can be used with any Interlogix alarm panel that has a wireless receiver such as an Interlogix NetworX system or the Simon XT or Simon XTi-5

The SDX-135Z communicates with the Interlogix panel you're using them with via the 319.5 MHz wireless frequency. These detectors also, independent of the alarm system, are networked on their own frequency of 915MHz. These have built-in 85dB temporal 3 and temporal 4 sounders and they will be set off by other smokes in the same 915MHz network if one gets set off. You can have up to 24 of these smokes interconnected wirelessly. 

 The detector has a built-in 135-degree rate of rise heat detector so that if the temperature rises quickly over a short period; a fire condition is initiated. The heat detector is restorable so you don't have to worry about replacing the detector after it trips like some other heat detectors that pop once and they're done. The sensor's freeze detector will set off a trouble alarm if the temperature reaches 41 degrees or lower. You can use these detectors simultaneously as a smoke/heat detector and a freeze sensor. They feature push-to-test buttons so that you can check response from the panel or just to test the onboard sounder. 

Installation Sheet
Data Sheet

Features

Extended Information