Honeywell 7847i IP Communicator

Honeywell 7847i IP Communicator

If you want central station monitoring service but don't have a land-line and you don't get a good cellular signal and you have a broadband internet connection, then the Honeywell 7847i IP Communicator is the solution that you are looking for!

The 7847i sends communication via Alarmnet to your central station and the signals sent are secure and encrypted for your protection. Not only can this send signal to a central station for monitoring service, but it can also be used with Honeywell's Total Connect service. Total Connect will allow you to interact with your Honeywell alarm system by giving you a virtual keypad which can arm and disarm the system when you're not on site. Total Connect can also send you notifications via email or text and let you know that someone is violating your home or business.

Base Alarm Monitoring and Alarmnet fees required for use

Specifications:

Electrical
Operating voltage: 12VDC
Current Drain: 75m
Radio Fault Output: Open collector
Input Trigger Levels: (V+) 2V-14V
(V-) 0V-1V
Ethernet
Network Standard: IEEE 802.3u compliant
Data Rate: 10Base-T/100Base-T with auto detect
Ethernet Cable: Cat.5 (min), MDI/MDI-X auto crossover
Mechanical
Dimensions: 8.4" x 8.0" x 1.5"
Weight: 1lb.
Environmental
Operating temperature: -20° C to 55° C (-4° F to 131° F)
Storage temperature: -40° C to 80° C (-40° F to 176° F)
Humidity: 0-95% relative humidity, non-condensing