AlarmSystemStore.com BBB Business Review

GE 5820A Recessed 1" Glassbreak Sensor

Quick Overview
GE 5820A Recessed 1" Glassbreak Sensor The GE 5820A is a glass break detector that you can sink into the wall to make it somewhat hard to notice. The only...

Available : In Stock

$45.95

Ship out same day or within 24 hours
Add to Wishlist

GE 5820A Recessed 1" Glassbreak Sensor

The GE 5820A is a glass break detector that you can sink into the wall to make it somewhat hard to notice. The only thing visible with the GE 5820A is the thin round head of the detector. The casing of this item is flame retardant ABS plastic and will stand up to a high heat range. The microphone that picks up the sound of glass breaking is an omni-directional microphone and will detect breaking glass in a 25 foot radius.

This detector will pick up the sounds of any of these types of glass breaking:

Plate glass 3/32" to 1/4" (2.39 to 6.4mm)
Tempered glass 1/8" to 1/4" (.125 to 6.4mm)
Wired glass 1/4" (6.4 mm)
Laminated glass 1/8" to 1/4" (.125 to 6.4mm)

If you don't use motion detectors then these are the next best defense for your home or business

Specifications:

Electrical

Operational voltage 9 to 16V DC
Current draw 12mA typical; 25mA max.
Relay output Normally closed,
open 4 seconds on alarm
On resistance 5 to 20 Ω
Off resistance >1 MΩ
Maximum loop rating
(relay or tamper loop) 16VDC, 50mA
Fails safe and opens on power loss

Environmental

Lightning suppression 400 watts for 1 msec pulse
Operating temperature 0 F to 120 F (-18 C to +50 C)
RFI immunity 10 V/meter from 1 to 1000MHz


Features

Recess mounts in a 1-inch diameter hole in ceiling
or wall
25' radius range protects an entire room with
one sensor
Protective sleeve makes removal easy
Single Gang Box Kit for Prewire and Flush Mounting

Extended Information