Selling direct
to DIY since 1997!
AlarmSystemStore.com BBB Business Review
c_f {"shipping_time":"Usually Ships in 7 to 10 Business Days "}
custom_fields {"shipping_time":"Usually Ships in 7 to 10 Business Days"}

Seco-Larm E931CS22RFCQ Wireless Entry Alert System

Quick Overview
Seco-Larm E931CS22RFCQ Wireless Entry Alert System This is a two part beam detector from Seco-Larm. One side contains the actual beam and the other side is a reflector. If you...

$119.95

Usually Ships in 7 to 10 Business Days
Add to Wishlist

Seco-Larm E931CS22RFCQ Wireless Entry Alert System

This is a two part beam detector from Seco-Larm. One side contains the actual beam and the other side is a reflector.

If you are looking for a great solution for being notified when someone enters the building through a doorway then the Seco-Larm E931CS22RFCQ Wireless Entry Alert System. One side is a beam sensor and it shoots a beam across to the reflector which stops the beam from traveling too far and weakening. Once the beam is broken a signal is sent to the kit's wireless speaker initiating a tone that will let you know when someone is entering the building.

Kit Includes:
  • Weatherproof wireless reflective sensor (Tx) 
  • Wireless speaker (Rx)
  • Reflector
  • Two power adapters
  • Three mounting brackets, one each for the sensor, reflector, and speaker

Specifications:

Type:
Wireless Weatherproof Entry Alert System

Sensing range:
Up to 22ft (7m)

Wireless range:
Up to 328ft (100m)

RF Frequency:
433.92 MHz

Operating voltage:
9VDC (adapter included)

Current draw:
14mA
Standby current 3.7mA

Light source:
IR LED

Operating temperature
-4 - 122 F (-20 - 50 C)

Speaker volume:
Adjustable

Alarm time range:
Adjustable 3~30s

External chime output:
NPN O/P for external device (e.g. counter)

Speaker output:
Chime/Off/Alarm (selectable)

Dimensions:
Sensor - 3 1/8"x2 9/16"x1 7/16" (80x65x37 mm)
Speaker - 2 13/16"x2 15/16"x1 3/8" (80x75x35 mm)
Reflector - 2 3/8"x2 1/16"x3/8" (60x52x9 mm)

Features:

  • For monitoring a driveway or use as an entrance indicator
  • No wiring required between the sensor and speaker; when tripped, the sensor wirelessly transmits to any programmed speaker
  • Weatherproof photoelectric beam sensor for outdoor use
  • Speaker makes 'ding-dong' or siren sound if beam is interrupted
  • Speaker volume can be adjusted or turned off
  • When in siren mode, sounding time is adjustable from 3~30 seconds
  • Connect additional speakers to the sensor wirelessly (one speaker included)

Seco-Larm E931CS22RFCQ Installation manual
Seco-Larm E931CS22RFCQ Data sheet

Features

Extended Information