DSC RM-2 EOL Power Supervision Module
The DSC RM-2 is a power supervision module for the DSC FSA 410 model of smoke detectors. You will need this also if you're using any of the FSA 410 modules with sounders and are using the DSC PRM4W Polarity Reversal Modue For 4 Wire Smoke Detectors. This is for use only with the PRM4W. The difference the RM2 and the RM-1 is that the RM-1 spec sheet refers to the RM-1 not being able to handle polarity reversal. The RM2 has no problems with this and will function normally if used with the PRM4W.
This module is used to supervise the power supply to the smokes and will help make you aware immediately if there is any trouble. If the power fails to the smokes or if the line is cut then the RM-2 will immediately register a trouble condition and alert you.
The RM2 has an operating voltage between 10-30VDC and also has a relay contact rating of 2A@30VDC/VAC. The RM2 measures 1 1/8 x 3 3/8 x 7/8 in. All wiring connections are ran through the knock-out holes on the back of the RM-2. This unit may be mounted as it is on a wall or a ceiling, but may also be mounted inside of a 4" electrical box.
Related Products
-
{"id":7037376389,"title":"Smoke Detector Tester SmokeSabre","handle":"smoke-detector-tester","description":"\u003ch2\u003eSmoke Detector Tester SmokeSabre\u003c\/h2\u003e\nThe SmokeSabre is a handy way to test your smoke detectors. It's quick and convenient because of it's telescoping spray head. Flick your wrist, point and shoot. All you need is a short 0.5-1 second burst from the Sabre (repeat if necessary) to test your smoke detectors functionality. No more need to climb ladders to test your smokes and no more setting small fires with paper just to get smoke to test with.\u003cbr\u003e\u003cbr\u003eThe SmokeSabre is revolutionary in its design as the small holes in the spray head cause a better vaporization of the testing fluid allowing you to use less and for better dispersion of the testing fluid so that it doesn't leave a thick residue on the outside casing of the smoke detector. Also, when the Sabre's spray head is in the closed position it encases the trigger button to prevent accidental spraying.\u003cbr\u003e\u003cbr\u003eWe love these and we know that you will too!","published_at":"2016-05-02T21:44:00-04:00","created_at":"2017-01-23T07:19:53-05:00","vendor":"AlarmSystemStore.com","type":"Smoke Detector Accessories","tags":["Els PW 22657","Hardwired Sensors","Smoke Detector Accessories","Smoke Detectors"],"price":1595,"price_min":1595,"price_max":1595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526606085,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SMOKESABRE-01-024","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smoke Detector Tester SmokeSabre","public_title":null,"options":["Default Title"],"price":1595,"weight":454,"compare_at_price":null,"inventory_quantity":-88,"inventory_management":null,"inventory_policy":"deny","barcode":"SMOKESABRE-01-024","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-635583.jpg?v=1595526329","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-446578.jpg?v=1595526329"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-635583.jpg?v=1595526329","options":["Title"],"media":[{"alt":"Smoke Detector Tester SmokeSabre - AlarmSystemStore.com","id":7363180724326,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-635583.jpg?v=1595526329"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-635583.jpg?v=1595526329","width":1024},{"alt":"Smoke Detector Tester SmokeSabre - AlarmSystemStore.com","id":7363180855398,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-446578.jpg?v=1595526329"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-446578.jpg?v=1595526329","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSmoke Detector Tester SmokeSabre\u003c\/h2\u003e\nThe SmokeSabre is a handy way to test your smoke detectors. It's quick and convenient because of it's telescoping spray head. Flick your wrist, point and shoot. All you need is a short 0.5-1 second burst from the Sabre (repeat if necessary) to test your smoke detectors functionality. No more need to climb ladders to test your smokes and no more setting small fires with paper just to get smoke to test with.\u003cbr\u003e\u003cbr\u003eThe SmokeSabre is revolutionary in its design as the small holes in the spray head cause a better vaporization of the testing fluid allowing you to use less and for better dispersion of the testing fluid so that it doesn't leave a thick residue on the outside casing of the smoke detector. Also, when the Sabre's spray head is in the closed position it encases the trigger button to prevent accidental spraying.\u003cbr\u003e\u003cbr\u003eWe love these and we know that you will too!"}
-
{"id":7037376389,"title":"Smoke Detector Tester SmokeSabre","handle":"smoke-detector-tester","description":"\u003ch2\u003eSmoke Detector Tester SmokeSabre\u003c\/h2\u003e\nThe SmokeSabre is a handy way to test your smoke detectors. It's quick and convenient because of it's telescoping spray head. Flick your wrist, point and shoot. All you need is a short 0.5-1 second burst from the Sabre (repeat if necessary) to test your smoke detectors functionality. No more need to climb ladders to test your smokes and no more setting small fires with paper just to get smoke to test with.\u003cbr\u003e\u003cbr\u003eThe SmokeSabre is revolutionary in its design as the small holes in the spray head cause a better vaporization of the testing fluid allowing you to use less and for better dispersion of the testing fluid so that it doesn't leave a thick residue on the outside casing of the smoke detector. Also, when the Sabre's spray head is in the closed position it encases the trigger button to prevent accidental spraying.\u003cbr\u003e\u003cbr\u003eWe love these and we know that you will too!","published_at":"2016-05-02T21:44:00-04:00","created_at":"2017-01-23T07:19:53-05:00","vendor":"AlarmSystemStore.com","type":"Smoke Detector Accessories","tags":["Els PW 22657","Hardwired Sensors","Smoke Detector Accessories","Smoke Detectors"],"price":1595,"price_min":1595,"price_max":1595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526606085,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SMOKESABRE-01-024","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smoke Detector Tester SmokeSabre","public_title":null,"options":["Default Title"],"price":1595,"weight":454,"compare_at_price":null,"inventory_quantity":-88,"inventory_management":null,"inventory_policy":"deny","barcode":"SMOKESABRE-01-024","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-635583.jpg?v=1595526329","\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-446578.jpg?v=1595526329"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-635583.jpg?v=1595526329","options":["Title"],"media":[{"alt":"Smoke Detector Tester SmokeSabre - AlarmSystemStore.com","id":7363180724326,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-635583.jpg?v=1595526329"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-635583.jpg?v=1595526329","width":1024},{"alt":"Smoke Detector Tester SmokeSabre - AlarmSystemStore.com","id":7363180855398,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-446578.jpg?v=1595526329"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/smoke-detector-tester-smokesabre-446578.jpg?v=1595526329","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSmoke Detector Tester SmokeSabre\u003c\/h2\u003e\nThe SmokeSabre is a handy way to test your smoke detectors. It's quick and convenient because of it's telescoping spray head. Flick your wrist, point and shoot. All you need is a short 0.5-1 second burst from the Sabre (repeat if necessary) to test your smoke detectors functionality. No more need to climb ladders to test your smokes and no more setting small fires with paper just to get smoke to test with.\u003cbr\u003e\u003cbr\u003eThe SmokeSabre is revolutionary in its design as the small holes in the spray head cause a better vaporization of the testing fluid allowing you to use less and for better dispersion of the testing fluid so that it doesn't leave a thick residue on the outside casing of the smoke detector. Also, when the Sabre's spray head is in the closed position it encases the trigger button to prevent accidental spraying.\u003cbr\u003e\u003cbr\u003eWe love these and we know that you will too!"}
-
{"id":7037378053,"title":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders","handle":"system-sensor-rrs-mod-reversing-relay-smokes","description":"\u003ch2\u003eSystem Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders\u003c\/h2\u003e\nThis is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003e2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)\u003cbr\u003e\u003cbr\u003eOperating Temperature Range\u003cbr\u003e32 F to 131 F (0 C to 55 C)\u003cbr\u003e\u003cbr\u003eWire Connections\u003cbr\u003e18 AWG stranded, tinned, 16 in length\u003cbr\u003e\u003cbr\u003eOperating Humidity Range\u003cbr\u003e5% to 85% non-condensing\u003cbr\u003e\u003cbr\u003eElectrical Specifications\u003cbr\u003e\u003cbr\u003eOperating Voltage\u003cbr\u003eNominal: 12\/24 V\u003cbr\u003eMin: 8.5 V\u003cbr\u003eMax: 35 V\u003cbr\u003e\u003cbr\u003eAverage Operating Current:\u003cbr\u003e25 mA\u003cbr\u003eRelay Contact Rating\u003cbr\u003e2 A @ 35 VDC\u003cbr\u003e\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eIs compatible with 2- and 4-wire i3 detectors equipped with a sounder\u003c\/li\u003e\n\u003cli\u003eActivates all i3 sounders on a loop when one alarms\u003c\/li\u003e\n\u003cli\u003eSynchronizes all i3 sounders on the loop for a clear alarm signal\u003c\/li\u003e\n\u003cli\u003eIs usable with bell\/alarm, alarm relay, or NAC outputs\u003c\/li\u003e\n\u003cli\u003eHas a field-selectable switch to accommodate both coded and continuous alarm signals\u003c\/li\u003e\n\u003cli\u003eAllows i3 detector silencing from the panel or keypad\u003c\/li\u003e\n\u003cli\u003eOperates on 12 and 24 volt systems\u003c\/li\u003e\n\u003cli\u003eSimplifies connections with quick-connect harness and color-coded wires\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2016-10-20T04:30:00-04:00","created_at":"2017-01-23T07:20:11-05:00","vendor":"System Sensor","type":"Smoke Detector Accessories","tags":["Hardwired Sensors","RRS-MOD","RRSMOD","Smoke Detector Accessories","Smoke Detectors","System Sensor"],"price":5295,"price_min":5295,"price_max":5295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526618373,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Sys RRS-MOD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders","public_title":null,"options":["Default Title"],"price":5295,"weight":386,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"Sys RRS-MOD","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316","options":["Title"],"media":[{"alt":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders - AlarmSystemStore.com","id":7363175612518,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSystem Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders\u003c\/h2\u003e\nThis is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003e2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)\u003cbr\u003e\u003cbr\u003eOperating Temperature Range\u003cbr\u003e32 F to 131 F (0 C to 55 C)\u003cbr\u003e\u003cbr\u003eWire Connections\u003cbr\u003e18 AWG stranded, tinned, 16 in length\u003cbr\u003e\u003cbr\u003eOperating Humidity Range\u003cbr\u003e5% to 85% non-condensing\u003cbr\u003e\u003cbr\u003eElectrical Specifications\u003cbr\u003e\u003cbr\u003eOperating Voltage\u003cbr\u003eNominal: 12\/24 V\u003cbr\u003eMin: 8.5 V\u003cbr\u003eMax: 35 V\u003cbr\u003e\u003cbr\u003eAverage Operating Current:\u003cbr\u003e25 mA\u003cbr\u003eRelay Contact Rating\u003cbr\u003e2 A @ 35 VDC\u003cbr\u003e\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eIs compatible with 2- and 4-wire i3 detectors equipped with a sounder\u003c\/li\u003e\n\u003cli\u003eActivates all i3 sounders on a loop when one alarms\u003c\/li\u003e\n\u003cli\u003eSynchronizes all i3 sounders on the loop for a clear alarm signal\u003c\/li\u003e\n\u003cli\u003eIs usable with bell\/alarm, alarm relay, or NAC outputs\u003c\/li\u003e\n\u003cli\u003eHas a field-selectable switch to accommodate both coded and continuous alarm signals\u003c\/li\u003e\n\u003cli\u003eAllows i3 detector silencing from the panel or keypad\u003c\/li\u003e\n\u003cli\u003eOperates on 12 and 24 volt systems\u003c\/li\u003e\n\u003cli\u003eSimplifies connections with quick-connect harness and color-coded wires\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
{"id":7037378053,"title":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders","handle":"system-sensor-rrs-mod-reversing-relay-smokes","description":"\u003ch2\u003eSystem Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders\u003c\/h2\u003e\nThis is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003e2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)\u003cbr\u003e\u003cbr\u003eOperating Temperature Range\u003cbr\u003e32 F to 131 F (0 C to 55 C)\u003cbr\u003e\u003cbr\u003eWire Connections\u003cbr\u003e18 AWG stranded, tinned, 16 in length\u003cbr\u003e\u003cbr\u003eOperating Humidity Range\u003cbr\u003e5% to 85% non-condensing\u003cbr\u003e\u003cbr\u003eElectrical Specifications\u003cbr\u003e\u003cbr\u003eOperating Voltage\u003cbr\u003eNominal: 12\/24 V\u003cbr\u003eMin: 8.5 V\u003cbr\u003eMax: 35 V\u003cbr\u003e\u003cbr\u003eAverage Operating Current:\u003cbr\u003e25 mA\u003cbr\u003eRelay Contact Rating\u003cbr\u003e2 A @ 35 VDC\u003cbr\u003e\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eIs compatible with 2- and 4-wire i3 detectors equipped with a sounder\u003c\/li\u003e\n\u003cli\u003eActivates all i3 sounders on a loop when one alarms\u003c\/li\u003e\n\u003cli\u003eSynchronizes all i3 sounders on the loop for a clear alarm signal\u003c\/li\u003e\n\u003cli\u003eIs usable with bell\/alarm, alarm relay, or NAC outputs\u003c\/li\u003e\n\u003cli\u003eHas a field-selectable switch to accommodate both coded and continuous alarm signals\u003c\/li\u003e\n\u003cli\u003eAllows i3 detector silencing from the panel or keypad\u003c\/li\u003e\n\u003cli\u003eOperates on 12 and 24 volt systems\u003c\/li\u003e\n\u003cli\u003eSimplifies connections with quick-connect harness and color-coded wires\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2016-10-20T04:30:00-04:00","created_at":"2017-01-23T07:20:11-05:00","vendor":"System Sensor","type":"Smoke Detector Accessories","tags":["Hardwired Sensors","RRS-MOD","RRSMOD","Smoke Detector Accessories","Smoke Detectors","System Sensor"],"price":5295,"price_min":5295,"price_max":5295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":24526618373,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Sys RRS-MOD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders","public_title":null,"options":["Default Title"],"price":5295,"weight":386,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"Sys RRS-MOD","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316"],"featured_image":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316","options":["Title"],"media":[{"alt":"System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders - AlarmSystemStore.com","id":7363175612518,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.alarmsystemstore.com\/cdn\/shop\/products\/system-sensor-rrs-mod-reversing-relay-for-smokes-with-built-in-sounders-940749.jpg?v=1595526316","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSystem Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders\u003c\/h2\u003e\nThis is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003e2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)\u003cbr\u003e\u003cbr\u003eOperating Temperature Range\u003cbr\u003e32 F to 131 F (0 C to 55 C)\u003cbr\u003e\u003cbr\u003eWire Connections\u003cbr\u003e18 AWG stranded, tinned, 16 in length\u003cbr\u003e\u003cbr\u003eOperating Humidity Range\u003cbr\u003e5% to 85% non-condensing\u003cbr\u003e\u003cbr\u003eElectrical Specifications\u003cbr\u003e\u003cbr\u003eOperating Voltage\u003cbr\u003eNominal: 12\/24 V\u003cbr\u003eMin: 8.5 V\u003cbr\u003eMax: 35 V\u003cbr\u003e\u003cbr\u003eAverage Operating Current:\u003cbr\u003e25 mA\u003cbr\u003eRelay Contact Rating\u003cbr\u003e2 A @ 35 VDC\u003cbr\u003e\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eIs compatible with 2- and 4-wire i3 detectors equipped with a sounder\u003c\/li\u003e\n\u003cli\u003eActivates all i3 sounders on a loop when one alarms\u003c\/li\u003e\n\u003cli\u003eSynchronizes all i3 sounders on the loop for a clear alarm signal\u003c\/li\u003e\n\u003cli\u003eIs usable with bell\/alarm, alarm relay, or NAC outputs\u003c\/li\u003e\n\u003cli\u003eHas a field-selectable switch to accommodate both coded and continuous alarm signals\u003c\/li\u003e\n\u003cli\u003eAllows i3 detector silencing from the panel or keypad\u003c\/li\u003e\n\u003cli\u003eOperates on 12 and 24 volt systems\u003c\/li\u003e\n\u003cli\u003eSimplifies connections with quick-connect harness and color-coded wires\u003c\/li\u003e\n\u003c\/ul\u003e"}