DSC RM-1 Power Supervision Relay for 4-wire Smokes

DSC RM-2 EOL Power Supervision Module  The DSC RM-2 is a power supervision module for the DSC FSA 410 model of smoke detectors. You will need this also if you're using any of the FSA 410 modules with sounders and are using the DSC PRM4W Polarity Reversal Modue For 4 Wire Smoke Detectors. This is for use only with the PRM4W. The difference the RM2 and the RM-1 is that the RM-1 spec sheet refers to the RM-1 not being able to handle polarity reversal. The RM2 has no problems with this and will function normally if used with the PRM4W.  This module is used to supervise the power supply to the smokes and will help make you aware immediately if there is any trouble. If the power fails to the smokes or if the line is cut then the RM-2 will immediately register a trouble condition and alert you.  The RM2 has...

Smoke Detector Tester SmokeSabre The SmokeSabre is a handy way to test your smoke detectors. It's quick and convenient because of it's telescoping spray head. Flick your wrist, point and shoot. All you need is a short 0.5-1 second burst from the Sabre (repeat if necessary) to test your smoke detectors functionality. No more need to climb ladders to test your smokes and no more setting small fires with paper just to get smoke to test with.The SmokeSabre is revolutionary in its design as the small holes in the spray head cause a better vaporization of the testing fluid allowing you to use less and for better dispersion of the testing fluid so that it doesn't leave a thick residue on the outside casing of the smoke detector. Also, when the Sabre's spray head is in the closed position it encases the trigger button to prevent accidental spraying.We love these and...

System Sensor RRS-MOD Reversing Relay For Smokes With Built-In Sounders This is used to make all of the smoke detector sounders of your smoke detectors go off at the same time when one is triggered. If you have a circuit of smoke detectors ran all on the same zone then this can trigger all the other smokes in the line when one is tripped. This will help alert anyone in the area where the smokes are placed that there is a fire and they need to exit the building.Dimensions2.5 in H x 2.5 in W x 1 in D (63 mm x 63 mm x 25 mm)Operating Temperature Range32 F to 131 F (0 C to 55 C)Wire Connections18 AWG stranded, tinned, 16 in lengthOperating Humidity Range5% to 85% non-condensingElectrical SpecificationsOperating VoltageNominal: 12/24 VMin: 8.5 VMax: 35 VAverage Operating Current:25 mARelay Contact Rating2 A @ 35 VDC Is compatible with 2- and 4-wire i3...