{"title":"DSC Communicators","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe devices found in this section are communicators we offer that work with DSC alarm systems. These communicators add cellular and\/or IP communication paths to your alarm system, allowing it to report to a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-monitoring\" title=\"Alarm Monitoring Service - Central Station Fee For One Year\"\u003eCentral Station\u003c\/a\u003e, and in some cases, utilize interactive features like an app to remotely access your alarm system.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe DSC communicators listed in this section allow your DSC alarm system to utilize cellular or IP connections for alarm monitoring or remote interactive features. These communicators work with either the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/dsc-powerseries-neo\" title=\"DSC PowerSeries NEO\"\u003eDSC PowerSeries NEO\u003c\/a\u003e or the older DSC PowerSeries alarm systems. The communicators you'll find here work with either \u003ca href=\"https:\/\/www.alarmsystemstore.com\/pages\/alarm-com-service-plans\" title=\"Alarm.com Service Plans\"\u003eAlarm.com Services\u003c\/a\u003e or DSC's proprietary service, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/gsm-ip-monitoring-add-on\" title=\"Connect 24 Cellular Communicator Monitoring Add-On\"\u003eConnect 24\u003c\/a\u003e. The Alarm.com communicators are by far the more popular option as they are relatively easy to install and require a very minimal amount of programming to set up. \u003c\/p\u003e\n\u003cp\u003eThe first communicator options you'll find are the TL880 communicators for the DSC NEO system. The TL880 and its predecessors were Alarm.com's first fully integrated communicator, allowing numerous features that were previously unheard of for the DSC NEO, such as remote firmware updates for system components through alarm services. The TL880 is a dual-path 4G LTE and Ethernet communicator that connects your DSC NEO to Alarm.com's Interactive Services. TL880 communicators come with either an AT\u0026amp;T or Verizon SIM card built in, so you can utilize the cell signal that works best in your area. The \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet\" title=\"DSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)\"\u003eTL880LECAT-N\u003c\/a\u003e includes an AT\u0026amp;T SIM card, and the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880ltvz-alarm-com-dual-path-communicator-verizon-lte-ethernet\" title=\"DSC TL880LECVZ N Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)\"\u003eTL880LECZV-N\u003c\/a\u003e comes with a Verizon SIM card. In addition, the TL880 has a built-in Ethernet port, giving you the option of connecting the unit to a router or modem for a backup connection. Using Alarm.com, you'll be able to not only forward your alarm signals to a Central Station, but you'll have the ability to control and monitor the alarm system directly from your phone with the Alarm.com app. The TL880 comes with a 6ft antenna, which you can maneuver to find the best signal within a given room, and the TL880 can be run up to 100ft from the alarm system if you need to place it higher in the building. \u003c\/p\u003e\n\u003cp\u003eFollowing the TL880 is the SEM300-PS, which is the Alarm.com communicator for the DSC PowerSeries alarm systems, such as the PC1616, PC1832, and PC1864. Although the DSC PowerSeries has been discontinued, those with existing systems can still utilize Alarm.com's award-winning interactive services with this module. The SEM300-PS is a dual-path communicator that uses both 4G LTE and an Ethernet IP connection for signalling. The \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/adc-sem210-ps-at-system-enhancement-module-for-dsc-powerseries\" title=\"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026amp;T)\"\u003eSEM300-PS-AT\u003c\/a\u003e has a built-in AT\u0026amp;T SIM card, while the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/adc-sem210-ps-vz-system-enhancement-module-for-dsc-powerseries-verizon\" title=\"Alarm.com ADC-SEM300-PS-VZ-M System Enhancement Module For DSC PowerSeries (Verizon)\"\u003eSEM300-PS-VT\u003c\/a\u003e comes with a Verizon SIM card, allowing you to choose the best signal provider in your area. Included in the SEM300s is an Ethernet port so you can run an optional IP connection to your home's router or modem. \u003c\/p\u003e\n\u003cp\u003eIn addition, we have 2 DSC-branded communicators for use with the DSC NEO as well. The \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl280lerx-at-dual-path-ip-at-t-lte-communicator-for-dsc-neo-series\" title=\"DSC-TL280LERX-AT Dual Path IP \/ AT\u0026amp;T LTE Communicator For DSC Neo Series\"\u003eTL280LERX-AT\u003c\/a\u003e is a dual-path communicator that utilizes an AT\u0026amp;T SIM card and DSC's Connect 24 services for communication. And the \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-powerseries-neo-tl280e\" title=\"DSC PowerSeries NEO TL280RE Internet Alarm Communicator\"\u003eTL280RE\u003c\/a\u003e is an IP-only communicator, which can be directly connected to a monitoring center for reduced cost monitoring. It is important to note, however, that the TL280RE requires networking knowledge and a very good understanding of the DSC NEO alarm system to set up. If you are not 100% sure you know what you're doing, it is recommended that you go with the Alarm.com TL880, which is much simpler to install and get operational. Additionally, AlarmSystemStore.com no longer offers IP-only monitoring, so if you purchase the TL280RE for your system, you will need a service provider that does. \u003c\/p\u003e","products":[{"product_id":"dsc-powerseries-neo-tl280e","title":"DSC PowerSeries NEO TL280RE Internet Alarm Communicator","description":"\u003ch2\u003eDSC PowerSeries NEO \u003cspan\u003eTL280RE\u003c\/span\u003e Internet Alarm Communicator\u003c\/h2\u003e\n\u003cp\u003eThe DSC \u003cspan\u003eTL280RE\u003c\/span\u003e is an internet communicator that can be used with DSC's new NEO PowerSeries security systems. This will let your panel send a signal to a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-central-station-monitoring-annual-service-plan\"\u003ecentral station monitoring\u003c\/a\u003e service via the internet. This communicator uses 128-bit encryption and will give you peace of mind that your burglary signals are getting through to the central station receiving computer in a fast and secure manner. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e We no longer offer central station monitoring services with this IP communicator. You should confirm compatibility with your provider before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eTHIS CANNOT BE USED WITH THE \u003cstrong\u003eCONNECT ALARM APP\u003c\/strong\u003e IN THE US. Connect Alarm is only for use in Canada and possibly other non US markets and we have no information about it other than it's not available in the US.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eIMPORTANT NOTE\u003c\/strong\u003e: Due to the nature of this product and its extensive use of computer networking protocols, we do not offer any technical support for this product.  If you are not very knowledgeable about networking, we recommend another option that is more plug n play, such as the dual-path cellular devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003eInput Voltage........... 10.8 - 12.5 VDC\u003cbr\u003eWeight..................... 0.683 lbs (310 g) (with the mounting brace)\u003cbr\u003eCurrent Draw............................................................... 100 mA\u003cbr\u003eOperating Environment................ 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/3G2080-TL2803G-TL280_IM_En_R001.pdf?12425613672809040265\" title=\"DSC TL280RE Installation manual\" target=\"_blank\"\u003eDSC TL280RE Installation manual\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/30001623R001_TL280_R_E_Spec_Eng.pdf?781800175463947239\" title=\"DSC TL280RE Specifications sheet\" target=\"_blank\"\u003eDSC TL280RE Specifications sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003ePanel remote uploading\/downloading via the Internet\u003cbr\u003eProgrammable using DLS 5 or keypad\u003cbr\u003eSupervision heartbeat via the Internet\u003cbr\u003e128 Bit AES Encryption\u003cbr\u003eFull event reporting\u003cbr\u003eSIA and Contact ID protocol\u003cbr\u003e(System 5 required for Visual Verification)\u003cbr\u003eVisual verification over the Internet\u003cbr\u003eThe communicator can be housed in the separate cabinet using PCL-422 Communicator Remote Mounting Module","brand":"DSC","offers":[{"title":"Default Title","offer_id":24526396357,"sku":"DSC-TL280RE","price":184.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/dsc-powerseries-neo-tl280re-internet-alarm-communicator-621888.jpg?v=1723599412"},{"product_id":"adc-sem210-ps-at-system-enhancement-module-for-dsc-powerseries","title":"Alarm.com ADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026T)","description":"\u003cp class=\"product-excerpt\"\u003eThe SEM300-PS-AT-M is an update to the previous SEM 210 model. The SEM300-PS-AT-M is an LTE cellular and internet communicator from Alarm.com for the DSC PC1616, PC1832, and PC1864. The SEM300 provides dual-path communication to your system for Alarm.com service plans. Also includes a z-wave hub for automation service packages. This model runs on AT\u0026amp;T signaling.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eADC-SEM300-PS-AT-M System Enhancement Module For DSC PowerSeries (AT\u0026amp;T)\u003c\/h2\u003e\n\u003ch4\u003eWhat you'll get:\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e1 - ADC-SEM300-PS-AT-M\u003cbr\u003e1 - Antenna\u003cbr\u003e1 - Red power wire for battery connection\u003cbr\u003e3 - Screws\u003cbr\u003e3 - Wall anchors\u003c\/p\u003e\n\u003cp\u003eThe ADC-SEM300-PS-AT is a dual path AT\u0026amp;T LTE cellular and Broadband internet communicator for DSC PC1616, PC1832, and PC1864 alarm systems that are version 4.2 or higher. This will send signal over the 4G AT\u0026amp;T LTE Network and has an optional hookup, via ethernet cable, for connecting to a router for IP communications.\u003c\/p\u003e\n\u003cp\u003eThis will operate from the panel's 12V power and will stay up and running during a power outage due to the backup battery of the alarm system it is hooked to. This module uses the black, green, and yellow terminals on the DSC panel for hook up and the positive wire will land on the positive terminal of your backup battery.\u003c\/p\u003e\n\u003cp\u003eThe SEM300 has indicator LEDs to give you status on the connection to the Alarm.com service and also features other LEDs to let you check on the status of the broadband connection and communications status.\u003c\/p\u003e\n\u003cp\u003e The ADC-SEM300-PS-AT also features a Z-Wave control unit that you be able to utilize if you subscribe to the \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive Service\u003c\/a\u003e and will give you the ability to create a Z-Wave network in your home for \u003ca title=\"Z-WAVE HOME AUTOMATION DEVICES\" href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\"\u003ehome automation devices\u003c\/a\u003e such as lights, door locks, and thermostats.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure Dimensions (L x W x D): 7.5 x 4.25 x 1.5 in. (19.05 x 11.43 x 3.81 cm)\u003c\/li\u003e\n\u003cli\u003eEnclosure Color: White\u003c\/li\u003e\n\u003cli\u003eCase Material: High-impact, ABS plastic\u003c\/li\u003e\n\u003cli\u003eCompatibility: DSC PowerSeries PC1616, PC1832, and PC1864 version 4.2 or newer\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 12 V nominal, 130 mA (continuous) 2000 mA (instantaneous peaks) maximum (from panel battery)\u003c\/li\u003e\n\u003cli\u003eCellular Network: AT\u0026amp;T Dual Band 4G LTE\u003c\/li\u003e\n\u003cli\u003ePanel Interfaces: Three keypad bus connections 12V power and ground to panel battery\u003c\/li\u003e\n\u003cli\u003eAlarm.com Module Indicators: One module\/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs\u003c\/li\u003e\n\u003cli\u003eSEM Circuit Board Indicators: One LAN LED, one processor LED, one COMM fail LED\u003c\/li\u003e\n\u003cli\u003eZ-Wave Frequency: 908.4 MHz\u003c\/li\u003e\n\u003cli\u003eOperation temperature: 32° - 120° F (0°C - 49°C)\u003c\/li\u003e\n\u003cli\u003eStorage temperature: -30° - 140° F (-34°C - 60°C)\u003c\/li\u003e\n\u003cli\u003eHumidity: 90% relative humidity, non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide_a40e36c0-7a99-40ec-8984-4bfdffb9881e.pdf?v=1715973322\" target=\"_blank\" title=\"ADC Sem 300 DSC install guide\" rel=\"noopener\"\u003eADC SEM300-PS Quick Install Guide\u003c\/a\u003e\u003ca title=\"ADC Sem 300 DSC install guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\" rel=\"noopener noreferrer\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide.pdf?v=1664562394\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM210_Quick_Install_Guide.pdf?v=1628872187\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Installation_Guide.pdf?v=1694618748\" title=\"Alarm.com ADC-SEM300-PS-VZ Installation manual\" target=\"_blank\"\u003eInstallation guide\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Data_Sheet.pdf?v=1694618746\" title=\"ADC-SEM300-PS-VZ Specifications Sheet\" target=\"_blank\"\u003eSpecifications Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Alarm.com","offers":[{"title":"Default Title","offer_id":6598096060455,"sku":"ADC-SEM300-PS-AT-M","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarmcom-adc-sem300-ps-at-m-system-enhancement-module-for-dsc-powerseries-att-797919.jpg?v=1694656638"},{"product_id":"dsc-tl880ltvz-alarm-com-dual-path-communicator-verizon-lte-ethernet","title":"DSC TL880LECVZ N Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)","description":"\u003ch2\u003eDSC \u003cspan data-mce-fragment=\"1\"\u003eTL880LECVZ N\u003c\/span\u003e Alarm.com Dual Path Communicator (Verizon LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e The DSC TL880LTVZN Alarm.com Dual Path Communicator is a 4G LTE style cellular communicator that also has the ability to send signals through the internet if you connect it via ethernet cable to a router. This provides redundancy because if one path fails the other takes over. The TL880LTVZN connects to a DSC PowerSeries NEO panel via the PCL-422 module which, in turn, connects to the NEO through PCLink cable. The PCL-422 is included when you buy the TL880LTVZN.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can send signals in either the SIA or Contact ID reporting formats. It also features a signal strength LED indicators so that you can get optimum placement in the install location. This unit also has troubleshooting lights so that if anything is amiss in the setup; you can read these lights to fix the situation.\u003c\/p\u003e\n\u003cp\u003eThe TL880LTVZN can be used with Alarm.com Level 1 Signal Forwarding to send signals to a central station monitoring service. You can also bump up to the Residential Interactive Service Alarm.com offers to get features such as your own notifications, remote control of the system via a smartphone app, and, with higher package levels, integrate Z-Wave home automation with these communicators built-in Z-Wave controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"ADC TL880 Troubleshooting Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" target=\"_blank\"\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"DSC TL880LTVZ Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"DSC TL880LTVZ Specifications sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"DSC","offers":[{"title":"Default Title","offer_id":6641358438439,"sku":"DSC-TL880LECVZN","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/dsc-tl880ltvzn-alarmcom-dual-path-communicator-verizon-lte-ethernet-417690.jpg?v=1595526133"},{"product_id":"adc-sem210-ps-vz-system-enhancement-module-for-dsc-powerseries-verizon","title":"Alarm.com ADC-SEM300-PS-VZ-M System Enhancement Module For DSC PowerSeries (Verizon)","description":"\u003cp class=\"product-excerpt\"\u003eThe SEM300-PS-VZ-M replaces the previous model (SEM210) It is an LTE cellular and internet communicator from Alarm.com for the DSC PC1616, PC1832, and PC1864. The SEM300-PS provides dual-path communication to your system for Alarm.com service plans. Also includes a z-wave hub for automation service packages. This model runs on Verizon signal.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eADC-SEM300-PS-VZ-M System Enhancement Module For DSC PowerSeries (Verizon)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eWhat you'll get:\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e1 - ADC-SEM300-PS-VZ-M\u003cbr\u003e1 - Antenna\u003cbr\u003e1 - Red Power Wire for Battery Connection\u003cbr\u003e3 - Screws\u003cbr\u003e3 - Wall anchors\u003c\/p\u003e\n\u003cp\u003eThe ADC-SEM310-PS-VZ-M is a dual path Verizon cellular and Broadband internet communicator for DSC PC1616, PC1832, and PC1864 alarm systems that are version 4.2 or higher. This will send signal over the 4G Verizon Network and has an optional hookup, via ethernet cable, for connecting to a router for IP communications.\u003c\/p\u003e\n\u003cp\u003eThis will operate from the panel's 12V power and will stay up and running during a power outage due to the backup battery of the alarm system it is hooked to. This module uses the black, green, and yellow terminals on the DSC panel for hook up and the positive wire will land on the positive terminal of your backup battery.\u003c\/p\u003e\n\u003cp\u003eThe SEM300 has indicator LEDs to give you status on the connection to the Alarm.com service and also features other LEDs to let you check on the status of the broadband connection and communications status.\u003c\/p\u003e\n\u003cp\u003e The ADC-SEM300-PS-VZ-M also features a Z-Wave control unit that you be able to utilize if you subscribe to the \u003ca title=\"Alarm.com Residential Interactive Service\" href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\"\u003eAlarm.com Residential Interactive Service\u003c\/a\u003e and will give you the ability to create a Z-Wave network in your home for \u003ca title=\"Z-WAVE HOME AUTOMATION DEVICES\" href=\"https:\/\/www.alarmsystemstore.com\/collections\/z-wave-home-automation-devices\"\u003ehome automation devices\u003c\/a\u003e such as lights, door locks, and thermostats.\u003c\/p\u003e\n\u003cp\u003eCurrent Draw: 130 mA (standby) 2000 mA (alarm transmission)\u003cbr\u003e\u003cbr\u003eCellular Network: Verizon Dual Band 4G LTE\u003cbr\u003e\u003cbr\u003eZ-wave frequency: 908.4MHz\u003cbr\u003ePanel Interfaces: 3 wire bus connection 12V power to panel battery +\u003cbr\u003e\u003cbr\u003eAlarm.com Module Indicators: \u003cbr\u003eOne module\/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs\u003cbr\u003e\u003cbr\u003eSEM Circuit Board Indicators: \u003cbr\u003eOne LAN LED, one processor LED, one COMM fail LED\u003cbr\u003e\u003cbr\u003eOperating Temperature: 32 to 120°F (0 to 49°C)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eStorage Temperature: -30 to 140°F (-34 to 60°C)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eHumidity: 90% relative humidity non-condensing\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEnclosure Dimensions (L x W x D).............7.5 x 4.25 x 1.5” (19.05 x 11.43 x 3.81 cm)\u003cbr\u003e\u003cbr\u003eEnclosure Color: White\u003cbr\u003eCase Material: High-impact, ABS plastic\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide_a40e36c0-7a99-40ec-8984-4bfdffb9881e.pdf?v=1715973322\" target=\"_blank\" title=\"ADC SEM300 DSC PowerSeries quick install guide\" rel=\"noopener\"\u003eADC SEM300 Quick Install Guide\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_SEM300_DSC_Troubleshooting_Guide_a343ccb1-2c3e-4ded-b01a-d4eaf5290f81.pdf?v=1700069497\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"Alarm.com ADC-SEM300-PS-VZ Installation manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Installation_Guide.pdf?v=1694618748\" target=\"_blank\"\u003eInstallation guide\u003cbr\u003e\u003c\/a\u003e\u003ca title=\"ADC-SEM300-PS-VZ Specifications Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/SEM-DSC_PowerSeries_Dual-Path_SEM300_-_Data_Sheet.pdf?v=1694618746\" target=\"_blank\"\u003eSpecifications Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Alarm.com","offers":[{"title":"Default Title","offer_id":10235744878636,"sku":"ADC-SEM300-PS-VZ-M","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/alarmcom-adc-sem300-ps-vz-m-system-enhancement-module-for-dsc-powerseries-verizon-207252.jpg?v=1694656638"},{"product_id":"dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet","title":"DSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)","description":"\u003ch2\u003eDSC TL880LECATN Alarm.com Dual Path Communicator (ATT LTE, Ethernet)\u003c\/h2\u003e\n\u003cp\u003e What you'll get:\u003c\/p\u003e\n\u003cp\u003e1 - TL880LECATN Cellular Communicator\u003cbr\u003e1 - Attached antenna\u003cbr\u003e1 - PCL422 Daughterboard\u003cbr\u003e1 - PCLink cable\u003cbr\u003eInstallation hardware\u003cbr\u003eInstallation instructions\u003c\/p\u003e\n\u003cp\u003e The TL880LECATN is a 4G LTE cellular communicator that will send alarm signals and information through the AT\u0026amp;T network. The communicator also has the ability to be fully redundant because of its ability to use the internet communication path as well. The TL880LECATN will connect to a DSC NEO version 1.1 or above by way of the included PCL422 daughterboard. \u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN can send alarm signals to a \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-monitoring\" title=\"Central Station Monitoring Service\"\u003ecentral station\u003c\/a\u003e using either SIA or Contact ID reporting format. You can also use this communicator for \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-residential-services\" title=\"Alarm.com Residential Interactive Service\"\u003eAlarm.com Residential Interactive\u003c\/a\u003e or \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-com-interactive-commercial-services\" title=\"Alarm.com Commercial Interactive Service\"\u003eAlarm.com Commercial Interactive\u003c\/a\u003e services. The communicator features signal strength LEDs so you will be able to determine the best placement before getting it activated. It also has troubleshooting LEDs that will help you identify even the most minute problem.\u003c\/p\u003e\n\u003cp\u003eThe TL880LECATN, like all Alarm.com, powered communicators, features a built-in Z-Wave controller that will be used in conjunction with the Residential Interactive if you have the Residential Interactive + Automation or the Residential Interactive Gold package levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Compatible with HS2016\/ HS2032\/ HS2064\/ HS2128 control panels V1.1 and higher\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Now compatible with PowerSeries Pro HS3032, HS3128 and HS3248 control panels V1.1 and higher\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e• Compatible with Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions - 5.875\" W × 4.5” H (150mm × 115mm)\u003cbr\u003eWeight - 0.683 lbs (310 g) (with mounting bracket)\u003cbr\u003eCurrent Draw - 150 mA\u003cbr\u003eOperating Environment - 5° to 40° C (40° to 104° F)\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880_QUICK_INSTALL_GUIDE.pdf?v=1715866743\" target=\"_blank\"\u003eADC TL880 Quick Install Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/ADC_TL880_Troubleshooting_Guide.pdf?v=1628872256\" title=\"ADC TL880 Troubleshooting Guide\" target=\"_blank\"\u003eADC TL880 Troubleshooting Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/DSC_NEOTL880LT-NEOTL880LE_IT_R002_29010001.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Installation manual\" target=\"_blank\"\u003eDSC TL880LTVZ Installation manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/TL880LE-TL880LT_ds_lt_en_lr.pdf?5019173717107515458\" title=\"DSC TL880LTVZ Specifications sheet\" target=\"_blank\"\u003eDSC TL880LTVZ Specifications sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"DSC","offers":[{"title":"Default Title","offer_id":12340330463276,"sku":"DSC-TL880LECATN","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/dsc-tl880leatn-alarmcom-dual-path-communicator-att-lte-ethernet-896935.jpg?v=1595526125"},{"product_id":"dsc-lte15ant-15-ft-indoor-outdoor-antenna-extension-kit","title":"DSC LTE15ANT 15 Ft Indoor Outdoor Antenna Extension Kit","description":"\u003ch2\u003eDSC LTE15ANT 15 Ft Indoor Outdoor Antenna Extension Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtension antenna with cable\u003c\/li\u003e\n\u003cli\u003eWall-mount bracket\u003c\/li\u003e\n\u003cli\u003eU-bracket\u003c\/li\u003e\n\u003cli\u003eBrass adaptor\u003c\/li\u003e\n\u003cli\u003ePlug\u003c\/li\u003e\n\u003cli\u003eClamp\u003c\/li\u003e\n\u003cli\u003eCable tie wrap\u003c\/li\u003e\n\u003cli\u003eAntenna connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you have a DSC cellular communicator and aren't getting sufficient signal strength anywhere in the location you are mounting the communicator in then you most likely could benefit from this antenna extension kit.\u003c\/p\u003e\n\u003cp\u003eThis antenna gives your cellular communicator a 3dBi gain for signal strength. This is a 15 foot extension and mounts to most DSC 3G and 4G cellular communicators. You'll mount this antenna in a high spot of the building to give it extra reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePowerSeries NEO:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl280lerx-at-dual-path-ip-at-t-lte-communicator-for-dsc-neo-series\" title=\"DSC LE2080R-AT CELLULAR AT\u0026amp;T LTE COMMUNICATOR FOR DSC NEO SERIES\"\u003eLE2080\u003c\/a\u003e, 3G2080, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl280lerx-at-dual-path-ip-at-t-lte-communicator-for-dsc-neo-series\" title=\"DSC TL280LE-AT DUAL PATH IP \/ AT\u0026amp;T LTE COMMUNICATOR FOR DSC NEO SERIES\"\u003eTL280LE\u003c\/a\u003e, TL2803G, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880ltvz-alarm-com-dual-path-communicator-verizon-lte-ethernet\" title=\"DSC TL880LTVZ ALARM.COM DUAL PATH COMMUNICATOR (VERIZON LTE, ETHERNET)\"\u003eTL880LTVZ\u003c\/a\u003e, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet\" title=\"DSC TL880LEAT ALARM.COM DUAL PATH COMMUNICATOR (ATT LTE, ETHERNET)\"\u003eTL880LEAT\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePowerSeries:\u003c\/strong\u003e 3G2060, TL2603G, TL260GS, GS2060\u003cbr\u003e\u003cstrong\u003eAlexor:\u003c\/strong\u003e TL265GS, GS2065\u003cbr\u003e\u003cstrong\u003eImpassa:\u003c\/strong\u003e 3G2055, GS2055, TL2553G, 3G2077\u003cbr\u003e\u003cstrong\u003eUniversal:\u003c\/strong\u003e 3G4000, 3G4010, 3G4010CF, \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet\" title=\"DSC LE4000-AT UNIVERSAL LTE COMMUNICATOR\"\u003eLE4000\u003c\/a\u003e, LE4010, LE4010CF, LE4010ECF\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eType: LTE\/3G\/2G\u003cbr\u003eGain: 3dBi\u003cbr\u003ePolarization: Linear Vertical\u003cbr\u003eFrequency Range: 698 ~ 2700MHz\u003cbr\u003eAzimuth Beam Width: Omni-directional\u003cbr\u003eRadiating Element: 1\/4 Wave Helical\u003cbr\u003eAdmitted Power: 100W\u003cbr\u003eElevation Beach Width: 3dB\u003cbr\u003eVSWR (max.): 2.0\u003cbr\u003eImpedance: 50 ohm\u003cbr\u003eAntenna Length\/Diameter: 333mm\u003cbr\u003eAntenna Diameter: 35mm\u003cbr\u003eCable Type: 7D-FB\u003cbr\u003eCable Length (Ft\/m): 15'\/4.5m\u003cbr\u003eConnector: RP-SMA\u003cbr\u003eOperating Temperature: -40°C to +80°C\u003cbr\u003eStorage Temperature: -30°C to +70°C\u003c\/p\u003e","brand":"DSC","offers":[{"title":"Default Title","offer_id":30862984282214,"sku":"DSC-LTE15ANT","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/dsc-lte15ant-15-ft-indoor-outdoor-antenna-extension-kit-278860.jpg?v=1595526018"},{"product_id":"dsc-lte25ant-25-ft-indoor-outdoor-antenna-extension-kit","title":"DSC LTE25ANT 25 Ft Indoor Outdoor Antenna Extension Kit","description":"\u003ch2\u003eDSC LTE25ANT 25 Ft Indoor Outdoor Antenna Extension Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtension antenna with cable\u003c\/li\u003e\n\u003cli\u003eWall-mount bracket\u003c\/li\u003e\n\u003cli\u003eU-bracket\u003c\/li\u003e\n\u003cli\u003eBrass adaptor\u003c\/li\u003e\n\u003cli\u003ePlug\u003c\/li\u003e\n\u003cli\u003eClamp\u003c\/li\u003e\n\u003cli\u003eCable tie wrap\u003c\/li\u003e\n\u003cli\u003eAntenna connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you have a DSC cellular communicator and aren't getting sufficient signal strength anywhere in the location you are mounting the communicator in then you most likely could benefit from this antenna extension kit.\u003c\/p\u003e\n\u003cp\u003eThis antenna gives your cellular communicator a 3dBi gain for signal strength. This is a 25 foot extension and mounts to most DSC 3G and 4G cellular communicators. You'll mount this antenna in a high spot of the building to give it extra reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePowerSeries NEO:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl280lerx-at-dual-path-ip-at-t-lte-communicator-for-dsc-neo-series\" title=\"DSC LE2080R-AT CELLULAR AT\u0026amp;T LTE COMMUNICATOR FOR DSC NEO SERIES\"\u003eLE2080\u003c\/a\u003e\u003cspan\u003e, 3G2080, \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl280lerx-at-dual-path-ip-at-t-lte-communicator-for-dsc-neo-series\" title=\"DSC TL280LE-AT DUAL PATH IP \/ AT\u0026amp;T LTE COMMUNICATOR FOR DSC NEO SERIES\"\u003eTL280LE\u003c\/a\u003e\u003cspan\u003e, TL2803G, \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880ltvz-alarm-com-dual-path-communicator-verizon-lte-ethernet\" title=\"DSC TL880LTVZ ALARM.COM DUAL PATH COMMUNICATOR (VERIZON LTE, ETHERNET)\"\u003eTL880LTVZ\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet\" title=\"DSC TL880LEAT ALARM.COM DUAL PATH COMMUNICATOR (ATT LTE, ETHERNET)\"\u003eTL880LEAT\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePowerSeries:\u003c\/strong\u003e\u003cspan\u003e 3G2060, TL2603G, TL260GS, GS2060\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eAlexor:\u003c\/strong\u003e\u003cspan\u003e TL265GS, GS2065\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eImpassa:\u003c\/strong\u003e\u003cspan\u003e 3G2055, GS2055, TL2553G, 3G2077\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUniversal:\u003c\/strong\u003e\u003cspan\u003e 3G4000, 3G4010, 3G4010CF, \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet\" title=\"DSC LE4000-AT UNIVERSAL LTE COMMUNICATOR\"\u003eLE4000\u003c\/a\u003e\u003cspan\u003e, LE4010, LE4010CF, LE4010ECF\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eType: LTE\/3G\/2G\u003cbr\u003eGain: 3dBi\u003cbr\u003ePolarization: Linear Vertical\u003cbr\u003eFrequency Range: 698 ~ 2700MHz\u003cbr\u003eAzimuth Beam Width: Omni-directional\u003cbr\u003eRadiating Element: 1\/4 Wave Helical\u003cbr\u003eAdmitted Power: 100W\u003cbr\u003eElevation Beach Width: 3dB\u003cbr\u003eVSWR (max.): 2.0\u003cbr\u003eImpedance: 50 ohm\u003cbr\u003eAntenna Length\/Diameter: 333mm\u003cbr\u003eAntenna Diameter: 35mm\u003cbr\u003eCable Type: 7D-FB\u003cbr\u003eCable Length (Ft\/m): 25'\/7.62m\u003cbr\u003eConnector: RP-SMA\u003cbr\u003eOperating Temperature: -40°C to +80°C\u003cbr\u003eStorage Temperature: -30°C to +70°C\u003c\/p\u003e","brand":"DSC","offers":[{"title":"Default Title","offer_id":30863057485926,"sku":"DSC-LTE25ANT","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/dsc-lte25ant-25-ft-indoor-outdoor-antenna-extension-kit-524601.jpg?v=1595526129"},{"product_id":"dsc-lte50ant-50-ft-indoor-outdoor-antenna-extension-kit","title":"DSC LTE50ANT 50 Ft Indoor Outdoor Antenna Extension Kit","description":"\u003ch2\u003eDSC LTE50ANT 50 Ft Indoor Outdoor Antenna Extension Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtension antenna with cable\u003c\/li\u003e\n\u003cli\u003eWall-mount bracket\u003c\/li\u003e\n\u003cli\u003eU-bracket\u003c\/li\u003e\n\u003cli\u003eBrass adaptor\u003c\/li\u003e\n\u003cli\u003ePlug\u003c\/li\u003e\n\u003cli\u003eClamp\u003c\/li\u003e\n\u003cli\u003eCable tie wrap\u003c\/li\u003e\n\u003cli\u003eAntenna connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you have a DSC cellular communicator and aren't getting sufficient signal strength anywhere in the location you are mounting the communicator in then you most likely could benefit from this antenna extension kit.\u003c\/p\u003e\n\u003cp\u003eThis antenna gives your cellular communicator a 3dBi gain for signal strength. This is a 50 foot extension and mounts to most DSC 3G and 4G cellular communicators. You'll mount this antenna in a high spot of the building to give it extra reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePowerSeries NEO:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl280lerx-at-dual-path-ip-at-t-lte-communicator-for-dsc-neo-series\" title=\"DSC LE2080R-AT CELLULAR AT\u0026amp;T LTE COMMUNICATOR FOR DSC NEO SERIES\"\u003eLE2080\u003c\/a\u003e\u003cspan\u003e, 3G2080, \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl280lerx-at-dual-path-ip-at-t-lte-communicator-for-dsc-neo-series\" title=\"DSC TL280LE-AT DUAL PATH IP \/ AT\u0026amp;T LTE COMMUNICATOR FOR DSC NEO SERIES\"\u003eTL280LE\u003c\/a\u003e\u003cspan\u003e, TL2803G, \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880ltvz-alarm-com-dual-path-communicator-verizon-lte-ethernet\" title=\"DSC TL880LTVZ ALARM.COM DUAL PATH COMMUNICATOR (VERIZON LTE, ETHERNET)\"\u003eTL880LTVZ\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet\" title=\"DSC TL880LEAT ALARM.COM DUAL PATH COMMUNICATOR (ATT LTE, ETHERNET)\"\u003eTL880LEAT\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePowerSeries:\u003c\/strong\u003e\u003cspan\u003e 3G2060, TL2603G, TL260GS, GS2060\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eAlexor:\u003c\/strong\u003e\u003cspan\u003e TL265GS, GS2065\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eImpassa:\u003c\/strong\u003e\u003cspan\u003e 3G2055, GS2055, TL2553G, 3G2077\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUniversal:\u003c\/strong\u003e\u003cspan\u003e 3G4000, 3G4010, 3G4010CF, \u003c\/span\u003e\u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-tl880leat-alarm-com-dual-path-communicator-att-lte-ethernet\" title=\"DSC LE4000-AT UNIVERSAL LTE COMMUNICATOR\"\u003eLE4000\u003c\/a\u003e\u003cspan\u003e, LE4010, LE4010CF, LE4010ECF\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eType: LTE\/3G\/2G\u003cbr\u003eGain: 3dBi\u003cbr\u003ePolarization: Linear Vertical\u003cbr\u003eFrequency Range: 698 ~ 2700MHz\u003cbr\u003eAzimuth Beam Width: Omni-directional\u003cbr\u003eRadiating Element: 1\/4 Wave Helical\u003cbr\u003eAdmitted Power: 100W\u003cbr\u003eElevation Beach Width: 3dB\u003cbr\u003eVSWR (max.): 2.0\u003cbr\u003eImpedance: 50 ohm\u003cbr\u003eAntenna Length\/Diameter: 333mm\u003cbr\u003eAntenna Diameter: 35mm\u003cbr\u003eCable Type: 7D-FB\u003cbr\u003eCable Length (Ft\/m): 50'\/15.24m\u003cbr\u003eConnector: RP-SMA\u003cbr\u003eOperating Temperature: -40°C to +80°C\u003cbr\u003eStorage Temperature: -30°C to +70°C\u003c\/p\u003e","brand":"DSC","offers":[{"title":"Default Title","offer_id":30874431651942,"sku":"DSC-LTE50ANT","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/products\/dsc-lte50ant-50-ft-indoor-outdoor-antenna-extension-kit-572614.jpg?v=1595526055"},{"product_id":"dsc-tl280lerx-at-dual-path-ip-at-t-lte-communicator-for-dsc-neo-series","title":"DSC-TL280LERX-AT Dual Path IP \/ AT\u0026T LTE Communicator For DSC Neo Series","description":"\u003cp class=\"productexcerpt\"\u003eThe TL280LERX-AT is a dual-path cellular and IP communicator for DSC NEO Alarm systems. This Module can be used to provide signal forwarding to a Central Station via Connect 24 service. This is s direct replacement for the TL280LE-AT module.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDSC-TL280LERX-AT Dual Path IP \/ AT\u0026amp;T LTE Communicator For DSC Neo Series\u003c\/h2\u003e\n\u003cp\u003eThe DSC-TL280LERX-AT is a dual-path IP and cellular communicator that allows you to transmit alarm signals from your DSC PowerSeries NEO Panel to a Central Station. The TL280LERX-AT is a direct upgrade\/replacement for the TL280LE-AT with an upgraded chipset to provide a longer product life.  \u003cbr\u003e\u003cbr\u003eThis dual-path communicator sends alarm signals over the AT\u0026amp;T 4G LTE network which will get your alarms to the central station promptly and reliably. It also utilizes sending signals via the internet to provide redundancy in the rare event your cellular signal wavers. The TL280LERX-AT keeps the 128-bit AES encryption, as with all DSC NEO modules, to ensure any signals sent from your panel, whether by cellular network or internet, can't be intercepted or tampered with. The TL280LERX-AT also features a supervised heartbeat for both the cellular and internet paths which allows for monitoring the operating status of the cellular and internet communicator. The internet communications portion cannot be used on its own and must have a C24 cellular account to be used. This means you will need both of the following services to operate this communicator with Central Station Service:\u003c\/p\u003e\n\u003cp\u003e- \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/gsm-ip-monitoring-add-on\" title=\"Connect 24 Cellular Communicator Monitoring Add-On\" data-mce-href=\"https:\/\/www.alarmsystemstore.com\/products\/gsm-ip-monitoring-add-on\"\u003eConnect 24 Cellular Communicator Monitoring Add-On\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-monitoring\" title=\"Alarm Monitoring Service - Central Station Fee For One Year\" data-mce-href=\"https:\/\/www.alarmsystemstore.com\/products\/alarm-monitoring\"\u003eAlarm Monitoring Service - Central Station Fee For One Year\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eThe TL-280LERX-AT connects to your DSC NEO via an included PCLink cable. This module can be installed inside the alarm cabinet sitting in front of the system main board. The included antenna will protrude out of the top of you cabinet to avoid any interference from the metal. The TL280LERX-AT includes status LEDs to provide trouble conditions, cellular signal rating, and the status of the module while installed and powered on. \u003c\/p\u003e\n\u003cp\u003eThe TL280LERX is compatible with:\u003cbr\u003e- DSC PowerSeries NEO (HS2016, HS2032, HS2064 \u0026amp; HS2128) Ver. 1.0 or higher\u003cbr\u003e- DSC PowerSeries Pro (HS3032, HS3128 \u0026amp; HS3248) Ver 1.0 or higher\u003cbr\u003e- Sur-Gard System I-IP\/II\/III\/IV\/5 monitoring station receivers (SG-System 5 required for Visual Verification)\u003c\/p\u003e\n\u003cp\u003eIf needed, there are 3 extended antenna options for this module:\u003cbr\u003e- \u003ca title=\"DSC LTE15ANT 15 Ft Indoor Outdoor Antenna Extension Kit\" href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-lte15ant-15-ft-indoor-outdoor-antenna-extension-kit\" data-mce-href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-lte15ant-15-ft-indoor-outdoor-antenna-extension-kit\"\u003eDSC LTE15ANT 15 Ft Indoor Outdoor Antenna Extension Kit\u003c\/a\u003e\u003cbr\u003e- \u003ca title=\"DSC LTE25ANT 25 Ft Indoor Outdoor Antenna Extension Kit\" href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-lte25ant-25-ft-indoor-outdoor-antenna-extension-kit\" data-mce-href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-lte25ant-25-ft-indoor-outdoor-antenna-extension-kit\"\u003eDSC LTE25ANT 25 Ft Indoor Outdoor Antenna Extension Kit\u003c\/a\u003e\u003cbr\u003e- \u003ca title=\"DSC LTE50ANT 50 Ft Indoor Outdoor Antenna Extension Kit\" href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-lte50ant-50-ft-indoor-outdoor-antenna-extension-kit\" data-mce-href=\"https:\/\/www.alarmsystemstore.com\/products\/dsc-lte50ant-50-ft-indoor-outdoor-antenna-extension-kit\"\u003eDSC LTE50ANT 50 Ft Indoor Outdoor Antenna Extension Kit\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eIf you want Alarm.com services, which is generally the preferred service for DSC systems, then you will need a different communicator for your DSC NEO and those can be found \u003ca href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-communicators\" title=\"Alarm.com Communicators\" data-mce-href=\"https:\/\/www.alarmsystemstore.com\/collections\/alarm-com-communicators\"\u003eHERE\u003c\/a\u003e.\u003cbr id=\"tinymce\" class=\"mce-content-body\" data-id=\"product-description\" style=\"overflow-y: auto; padding-left: 0px; padding-right: 0px; padding-bottom: 0px;\" role=\"textbox\" aria-label=\"Description\" aria-multiline=\"true\" data-mce-style=\"overflow-y: auto; padding-left: 0px; padding-right: 0px; padding-bottom: 0px;\" contenteditable=\"true\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eBackup and primary Cellular alarm communication\u003cbr\u003eSupervision heartbeats via Cellular \u0026amp; Internet\u003cbr\u003e128-bit AES encryption via Cellular \u0026amp; Internet\u003cbr\u003eFull event reporting using SIA or Contact ID protocol\u003cbr\u003eAT\u0026amp;T SIM Card (included)\u003cbr\u003eRemote activating and programming through C24 Communications\u003cbr\u003eUL standard \u0026amp; encrypted line security\u003cbr\u003eULC passive or active line security levels\u003cbr\u003eAntenna Extension Kits available: LT-15ANT, LT-25ANT, LT-50ANT\u003cbr\u003eSignal strength and trouble display\u003cbr\u003ePC-Link connection\u003cbr\u003eVisual verification over Cellular\u003cbr\u003eR model supports 3rd party integration option via RS232 serial connection\u003cbr\u003eActive Cellular account is required to use Internet function\u003c\/p\u003e","brand":"DSC","offers":[{"title":"Default Title","offer_id":48991119475008,"sku":"DSC-TL280LERX-AT","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/files\/dsc-tl280lerx-at-dual-path-ip-att-lte-communicator-for-dsc-neo-series-281221.jpg?v=1732124133"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1659\/9809\/collections\/dsc-communicators-879306.jpg?v=1595525924","url":"https:\/\/www.alarmsystemstore.com\/collections\/dsc-communicators\/dscsem.oembed","provider":"AlarmSystemStore.com","version":"1.0","type":"link"}