DSC SDM-100 Two Tone Siren Driver

ELK 110 Voice Siren Driver The ELK 110 Voice Siren Driver features pre-recorded voice announcements for burglary, fire, and carbon monoxide emergency situations. Not only will it speak a message, but will also alternate between spoken message and siren tone. The voice can speak in English or Spanish. The driver has three channels for burglary, fire, and carbon monoxide.  The ELK 110 also has the VolumeStep™ option which causes the siren sound to start at low volume, gradually increasing over 90 seconds to maximum volume. Specifications: • Operating Voltage: 10 to 14 Volts DC• Current Draw: 1.25 Amps, (800 mA on MilliMiser™ setting), with one 8 Ohm speaker• Sound Level: 122 db @ 1 meter, 14 vdc, with one 8 Ohm speaker• Max. Speaker Load: 4 Ohms• Size: 2.75" x 4.0" (70mm x 102mm) Sound Examples: Burglary Message Fire Message Carbon Monoxide Message

ELK 120 Recordable Voice Siren Driver The ELK 120 is a siren driver that allows you to record your own sounds or speech to be played through an alarm speaker. It does come with pre-recorded sounds which you can sample below. But, it also features a built-in condenser microphone to allow you to record. This siren driver has 4 channels. You can use 2 channels for the siren tones and 2 channels for the voice recordings or all 4 channels can be used for the voice channels. The total recording time, split between the 4 channels, is 8 minutes. The siren sounds can be played and intermixed with the recorded voice sounds. The voice channels can have a one off shot or continuous.  This also features adjustable volume and current draw. It also features ELK's ComboTrigger™ mechanism which will allow the driver to operate on system's that have one bell...