Home > Z-Wave Home Automation > Z-Wave Lighting & Power Devices >

LIN-WS15Z1 Z-Wave Non-Dimming Wall Switch
LIN-WS15Z1 Z-Wave Non-Dimming Wall Switch

Our Price: $34.95

Availability: IN STOCK: Ships out same day or within 24 hours.
Product Code: LIN-WS15Z1


LIN-WS15Z1 Z-Wave Non-Dimming Wall Switch

The WS15Z-1 is a Z-Wave wall switch that features an ON/OFF only option. If you’re looking for a dimmer switch option then you’ll want the LIN-WD500Z1. This can take the place of your regular light switch. You’ll remove the old light switch and wire this in just like any other electrical light switch. This will provide a maximum resistive current of 15 amps (1800 watts).

The WS15Z-1 will be able to receive ON/OFF commands from any A-Wave controller. To add this to your Z-Wave network you will set your Z-Wave controller in Discover or Add mode and then tap the switch to add it to your network. Another feature of the WS15Z-1 is that it helps strengthen the network by acting as a repeater. This also has a nightlight feature that can be set to come on when the light switch is in the OFF mode.


Maximum Load:
Resistive: 15 amps (1800 watts) max., 120 VAC
Motor: 1/2 H.P. maximum, 120 VAC
Incandescent: 600W maximum, 120 VAC
Signal (Frequency): 908.42 MHz, 9.6Kbps or 40Kbps capable
Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device
Input: 120v 15A 60Hz
Z-Wave Version 4.55
Network wide inclusion
Scene: Command class
Security beaming
Requires a Neutral

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Z-Wave Home Automation > Z-Wave Lighting & Power Devices