Home > Z-Wave Home Automation > Z-Wave Lighting & Power Devices >

LIN-WO15Z1 Z-Wave Single Wall Outlet
LIN-WO15Z1 Z-Wave Single Wall Outlet

Our Price: $34.95

Availability: IN STOCK: Ships out same day or within 24 hours.
Product Code: LIN-WO15Z1


LIN-WO15Z1 Z-Wave Single Wall Outlet

The WO15Z-1 provides a single wall receptacle that you can wire in place of a regular wall outlet. What youíll get with the WO15Z-1 is a two outlet receptacle with one outlet capable of receiving ON/OFF commands from a Z-Wave controller and then a regular always-on outlet for regular use. Your bottom outlet will be your Z-Wave port. The load limit of this unit is a maximum of 600 watts incandescent at 120VAC and a resistive maximum of 15 amps meaning that this can accommodate a good bit of power.

The installation of this outlet will be familiar to anyone who has done standard electrical wiring for a receptacle. Youíll wire your white and black wires into the receptacle and then wire in your green for the ground. Secure the receptacle to the gang box and then set your Z-Wave controller to discover mode. After doing this; itís just a simple push of the button located on the WO15Z-1 to add it to the network.


Maximum Load:
Incandescent: 600W maximum, 120 VAC
Resistive: 15 amps (1800 watts) maximum, 120 VAC
Motor: 1/2 H.P. maximum, 120 VAC
Signal (Frequency): 908.42 MHz
Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device
Input: 120v 15A 60Hz
Tamper resistant as required by 2008 National Electric Code for new and renovated dwellings
Network wide inclusion
Scene: Command Class
Security beaming
Requires a Neutral

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Z-Wave Home Automation > Z-Wave Lighting & Power Devices