Home > Z-Wave Home Automation > Z-Wave Lighting & Power Devices >

  LIN-FS20Z-1 Z-Wave Contact Fixture Module
LIN-FS20Z-1 Z-Wave Contact Fixture Module


 
Our Price: $36.95

Availability: IN STOCK: Ships out same day or within 24 hours.
Product Code: LIN-FS20Z-1
Qty:

Description
 

LIN-FS20Z-1 Z-Wave Contact Fixture Module

The FS20Z-1 is an Isolated Contact Fixture Module that can be to convert everyday equipment in your household to be used with Z-Wave control modules. You can use this to control such devices as Commercial Lighting, In-Ceiling Lighting/fans, Dry-Contact Relays, Pool Pumps, and Water Heaters. This device can be mounted in a single- or multi-gang electrical box. The FS20Z-1 can handle operating loads or relay-based devices acting as a switch of sorts. This also can act as a repeater that will make sure that the networking of the Z-Wave devices in your home or business is complete and strong. This good for when a device might normally be outside of the wireless Z-Wave range.

Specifications

Maximum Load:
Isolated Contacts: 20 amps G.P. maximum, 277 VAC, 10FLA, 60LRA, 250VAC
Motor: 1 H.P. maximum, 120/240 VAC
Incandescent: TV8 (Tungsten), 120 VAC, 960W maximum
Signal (Frequency): 908.42 MHz
J-Box mounted
Dry or wet contact applications
Range: Up to 100 feet line of sight between the controller and/or the closest Z-Wave device
Input: 120 VAC, 50/60 Hz
Z-Wave Version 4.55
Network wide inclusion
Scene: Command Class
Security beaming
Isolated Relay Output up to 277v

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Z-Wave Home Automation > Z-Wave Lighting & Power Devices