Home > IP & Cellular Alarm Communicators > Honeywell Communicators >

Honeywell DCID-EXT Dialer Capture Module
Honeywell DCID-EXT Dialer Capture Module


 
Our Price: $29.95

Availability: IN STOCK: Usually Ships in 24 to 48 Hours
Product Code: HON-DCID-EXT
Qty:

Description
 

Honeywell DCID-EXT Dialer Capture Module

The Honeywell DCID-EXT is a dialer capture module made to be used with the GSMX-4G cellular communicator and the GSMV-4G cellular communicator. Dialer capture mode is what is used when the communicator can't be hooked the the ECP terminals on a system board. ECP terminals are commonly referred to as the keybus or keypad terminals. Dialer capture bascially works to pull the data from a system's phone line terminals and transfer them to the cellular communicator so that the signal may be sent to a central station monitoring service via the cellular network.

This is to be used with the GSMX-4G or GSMV-4G if you are not connecting the cellular communicator to a Honeywell alarm panel.

Specifications:

Physical:
6-1/2 H x 4-1/4 W x 1-1/4 D
(165mm x 110mm x 32mm)

Electrical:
Input Voltage: 12VDC nominal (9-14VDC, from
control panel)
Input Current: 40mA standby / 80mA active

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

IP & Cellular Alarm Communicators > Honeywell Communicators