Home > DSC Alarm Systems > DSC Accessories & Expansion Modules >

DSC TL2603GR Dual Path GSM/IP Communicator
DSC TL2603GR Dual Path GSM/IP Communicator

Our Price: $230.00

Availability: IN STOCK: Ships out same day or within 24 hours.
Product Code: DSCTL2603GRUSA


DSC TL2603GR Dual Path GSM/IP Communicator

As landlines slowly become obsolete more and more people are looking for alternative communication devices that they can use to report signals from their alarm panels to a Central Station Monitoring Service. The DSC TL2603GR is a great choice for you if that's what you're trying to accomplish!

This is a dual-path communications device and it takes advantage of internet and cellular networks to send signals at blazing fast speed. This, in itself, is a fully redundant means of communication: it is its own backup. If you have the IP portion as your primary and your internet happens to go down for some reason then the GSM cell portion will make sure that the signal goes through.

Not only is this a reporting device but with the use of DSC's DLS programming software you can remotely or locally make changes to your alarm system and check the status and event logs to view past troubles. Change zone information, user information and other sections of your alarm panel's programming with the DLS - TL2603GR combination.

All information sent through this device is 128-bit AES encrypted so that you never have to worry about the security of the information being transmitted.

The TL2603GR board does require a 5003C expansion cabinet.

IMPORTANT NOTE: Due to the nature of this product and it's extensive use of computer networking protocols, we are only able to offer limited technical support of this particular product. We can assist with basic installation and programming, but be forewarned, our support people are alarm techs not computer network techs. If you are not very capable with networks, we recommend the much simpler TL150 model.


Dimensions....................................... 3.937" 5.875" 0.625"

(100mm 150mm 15mm)

Weight.....................0.683 lbs (310 g) (with mounting bracket)

Input Voltage.............10 to 13.8 V (from the panel Bell output)

Current Draw...................................................100 mA at 12V

400 mA during Cellular transmission

Operating Environment..................5 to 40 C (40 to 104 F)

  • Compatible with PC1864/1832/1616 control panels (v4.1 and higher)
  • Fully redundant Internet and HSPA dual-path alarm communication
  • Integrated call routing
  • Panel remote uploading/downloading support via HSPA and Internet
  • Supervision heartbeats via HSPA and Internet
  • 128-bit AES encryption via HSPA and Internet
  • Full event reporting
  • SIA protocol
  • SIM Card (included)
  • Remote activating and programming through C24 Communications
  • Compatible with Sur-Gard System I/II/III/IV monitoring station receivers
  • UL standard & encrypted line security
  • ULC passive or active line security levels
  • Active GS account is required to use IP function
  • Antenna Extension Kits available: GS-15ANTQ, GS-25ANTQ, GS-50ANTQ
  • Signal strength and trouble display
  • Contact ID protocol (with PowerSeries firmware v4.5 and communicator v1.1 or higher)
  • PC-Link connection
  • RS-422 interface for connection of the C24-HUB
  • Direct connection to C24 Interactive via cellular
  • Approval Listings: FCC/IC, PTCRB, UL/ULC, NIST (AES Encryption Validation), CSFM, AT&T/Rogers

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

DSC Alarm Systems > DSC Accessories & Expansion Modules
IP & Cellular Alarm Communicators > DSC Communicators
DSC Expansion Modules