Home > DSC Alarm Systems > DSC Accessories & Expansion Modules >

DSC NEO 3G8080IAT Cellular Communicator w/ Image Sensor Support
DSC NEO 3G8080IAT Cellular Communicator w/ Image Sensor Support

Our Price: $249.95
Sale Price: $229.95
You save $20.00!

Availability: IN STOCK: Ships out same day or within 24 hours.
Product Code: DSC3G8080IAT


DSC NEO 3G8080IAT Cellular Communicator w/ Image Sensor Support

The DSC 3G8080IAT is a cellular alarm communicator especially made for the new DSC NEO security systems. The 3G8080IAT is Alarm.com ready and communicates over the AT&T cellular network. It adds Z-Wave capabilities so that you can use home automation and energy management features as well as interactive security and video monitoring.

This can be used as the primary communicator or as a backup to a landline in case of dialer failure. The 3G8080IAT uses the HSPA communications path of the cellular network. You can use 2-way voice verification with this communicator. The signals that are sent out from the communicator are 128-bits AES encrypted and you can be assured that your signal transmission is secure.

These are compatible with the DSC NEO HS2016/ HS2032/ HS2064/ HS2128 control panels. They are not backwards compatible with the DSC 1616/1832/1864. They connect to the main board via a PCLink cable. You can get a PCLink extender if you dont want to connect this directly at the box.

One more thing about the 3G8080IAT is that it has the capability to work with the new NEO image sensors. The image sensors are basically motion detectors that have built in cameras. When the motion is tripped; there is a camera in it that takes still pictures of the area where it is installed. If you have Alarm.com service; you can view these pictures when you are not at home.


Power Supply Ratings

Input Voltage 11.3V - 12.5V DC

Current Consumption

Standby Current 100mA@12V
Alarm (Transmitting) Current 200mA@12V

Cellular Network


Operating Frequency

850, 1900, 2100MHz

Environmental Specifications

Operating Temperature 14F to 131F (-10C to 55C)
Storage Temperature -30F to 140F (-34C to 60C)
UL/ULC verified operation for 32F-120F (0C-49C) only


90% non-condensing


6" x 8.9" x 1.3"



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

DSC Alarm Systems > DSC Accessories & Expansion Modules
IP & Cellular Alarm Communicators > DSC Communicators
DSC Expansion Modules
DSC PowerSeries NEO > DSC PowerSeries NEO Accessories & Expansion
IP & Cellular Alarm Communicators > Alarm.com Communicators