Call Us Today 888-811-0727
If you need an extension for your DSC cellular communicator because you're not getting the signal strength you need then the DSC GS50ANTQ 50 FT Quad External Antenna Extension Kit is what you'll need to get. The antenna extension gives you a 3dBi gain to signal and it must be mounted outside. It can be used indoors in higher elevations if needed. The antenna is a quad-band dipole antenna and reports on the following frequencies - 900/1800 & 850/1900. The total weight of cable and antenna is 5 lbs. The antenna itself is 24" and its diameter is 0.79".
As with any of these antenna extension kits; you must always mount these in a vertical position. Included in the kit will be all of the necessary mounting equipment like the mounting bracket and any screws you'll need. You will have to remove the stock antenna from the cellular communicator so that you can attach the extension. Each cellular communicator has a knock out hole on the case so that you can run the cable through it. The cable will screw onto the spot where the stock antenna was located. If you are mounting this and don't see a change in signal strength; it is recommeded to move it left to right and up to down.
You can us this extension kit with the DSC TL2603GR, the DSC 3G2060RUSA, the DSC PowerSeries NEO TL2803GUSA, the DSC PowerSeries NEO 3G2080USA,the DSC NEO CD8080VZ, the DSC NEO CD8080IVZ
, the DSC NEO 3G8080IAT and the DSC NEO 3G8080AT. The communicators listed above work with our DSC Power Series 1616, DSC Power Series 1832, DSC Power Series 1864 and the DSC PowerSeries NEO systems. These systems use cellular communicators for central station monitoring service or Alarm.com Interactive services.
Copyright © Volusion