Home > DSC Alarm Systems > DSC Accessories & Expansion Modules >

  DSC 3G4000USA Universal GSM Communicator Cell Backup
DSC 3G4000USA Universal GSM Communicator Cell Backup


 
Our Price: $124.95


Availability: IN STOCK: Ships out same day or within 24 hours.
Product Code: DSC3G4000USA


Battery Selection*:
No Battery
Add DSC3G4000BATT Battery [Add $24.95]

Qty:  
Description
 

DSC 3G4000USA Universal GSM Communicator Cell Backup

The DSC 3G4000USA is a new cellular communicator that can be used with any panel that uses the Contact ID format for reporting. The reporter uses the 3G cellular network and will automatically switch to the 2G network just in case a 3G network isn't available. The 3G4000USA provides full event reporting so when central station receives the signal they will be able to distinguish which zone gave the alarm report.

There are 2 inputs and 2 outputs. The 2 inputs can be used to trigger certain communications. They report in Contatc ID codes 991 and 992. The defaults for these are Burglary and Supervisory. So basically they can be used as a simple trigger to send two specific codes. The 2 outputs can be used to trigger devices such as lights or cameras attached to a DVR/NVR that has inputs. Once a certain circumstance occurs; the 3G4000 can trigger these devices using the 2 outputs given.

If you're using this communicator with another panel that's not a DSC 1616, 1832 or 1864 then you will hook it up differently. You can use the 3G4000 as a universal communicator because of it's ability to pull information from a panel's phone line terminals using a method called dialer capture. If you are using this with a DSC 1616, 1832 or 1864 then you will hook it up via a PCLink connection.

This is a very versatile communicator and will handle your security system reporting to central station with no problems.

Specifications:

Input Voltage (Nominal):
9-14VDC (use separately listed control panel or power supply) or 13.8VDC (use DSC ADP1320-NAx power adapter)

Input Current:
500mA (9-14Vdc) or 700mA (13.8VDC)

Current Consumption
Average:
40mA* Peak (no battery)
180mA* Peak (with battery)
350mA* * Plus any current drawn from the 3G4000 + terminal

Battery:
NiMH, rated 7.2V, 2.2Ah

Battery charging voltage (maximum):
9.1VDC

Battery charging current:
60mA

NOTE: Battery must be replaced every 3-5 years.

Operating frequency:
850/1900MHz

Antenna gain:
2.0dBi

Dimensions (plastic enclosure, painted):
125mm(W) 220mm (H) 31mm (D) / 4.9 8.7 1.2

Weight (without battery):
400g/1.2oz

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

DSC Alarm Systems > DSC Accessories & Expansion Modules
IP & Cellular Alarm Communicators > DSC Communicators
DSC Expansion Modules
IP & Cellular Alarm Communicators > Universal Communicators