Home > Honeywell Security > Honeywell Security Wireless >

Ademco 5808W3 Wireless Photoelectric Heat/Smoke Sensor
Ademco 5808W3 Wireless Photoelectric Heat/Smoke Sensor

Our Price: $78.65

Availability: IN STOCK: Ships out same day or within 24 hours.
Product Code: ADEMCO-5808W3


Ademco 5808W3 Wireless Photoelectric Heat/Smoke Sensor

This Photoelectric Heat and Smoke detector is easy to install andhas a built in wireless receiver. It's a smart checking device with LED's. This device is compatible with the 5800 series installations. This is not intended for commercial use, but for commercial installations, the 5881ENHC or the 5883H receiver is required. This is also compatible with the Lynx and Honeywell 5800 systems.

The 5808W3 can perform 3 different tasks. It has the ability to act as a smoke detector, a heat detector and a freeze detector. You will program the 5808W3 in different zones using the same serial number and a different loop number for its perspective function. You can have the 5808W3 perform one task or all three just by altering the programming in your Honeywell system.

If you need replacement batteries for this device you'll need CR123 lithium 3 volt battery


Diameter: 5.3" *, Height: 2.30"

8.5 ounces (without batteries)

Operating Temperature
32100 F (037.8 C)

Humidity Range
0% to 95% RH, non-condensing

Air Velocity
1,000 ft./min. max.

Operating Voltage

Standby Current
8.5 mA avg.

Alarm Current
35 mA max.

Power Source
One 3V CR123A lithium Battery

Audible Output
85 dB min. at 10 ft.

Fixed Temperature Heat Sensor
135 F Fixed

Agency Listings
UL268 Commercial and Residential

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Honeywell Security > Honeywell Security Wireless
Wireless Sensors > Honeywell Security Wireless Sensors > Honeywell Wireless Motion - Glassbreak - Fire Sensors