Fire-Lite MS2 2 zone Fire Alarm Control Panel

Specifications:

AC POWER — TB8
• MS-2: 120 VAC, 50/60 Hz, 2.3 A.
• MS-2E: 240 VAC, 50 Hz, 1.15 A.
• Wire Size: Minimum 14 AWG (2.0 mm²) with 600 V insulation.
BATTERY (SEALED LEAD-ACID ONLY) — J8
• Maximum charging circuit: normal flat charge 27.6 VCD @
0.8 A.
• Maximum battery charger capacity: 18.0 AH battery (two
7.0 AH batteries can be housed in the FACP cabinet. Larger
batteries require a separate battery box such as the Fire•Lite
BB-17F).
INITIATING DEVICE CIRCUIT — TB3
• Alarm zones 1 & 2.
• Power-limited circuitry.
• Operation: all zones Style B (Class B).
• Normal operating voltage: nominal 20 VDC.
• Alarm current: 15 mA minimum.
• Short-circuit current: 40 mA maximum.
• Maximum loop resistance: 100 ohms.
• End-of-line resistor: 4.7K ohm, ½ watt (P/N 71252).
• Standby current: 4 mA.
• Compatible devices: refer to the Fire•Lite Device Compatibility
Document PN 15384 for a complete list of compatible
devices.
NOTIFICATION APPLIANCE CIRCUIT — TB2
• One NAC.
• Power-limited circuitry.
• Normal operating voltage: nominal 24 VDC.
• Maximum signalling current: 2.5 A total with standard transformer.
• End-of-line resistor: 4.7K ohm, ½ watt (P/N 71252).
• Compatible devices: refer to the Fire•Lite Device Compatibility
Document PN 15384 for a complete list of compatible
devices.
FORM-C RELAYS
• Trouble Relay TB5 (fail-safe).
• Alarm Relay TB6.
• Relay contact ratings: 2.0 A @ 30 VDC (resistive).
AUXILIARY OUTPUT: RESETTABLE POWER — TB1
• Operating voltage: nominal 24 VDC.
• Maximum available current: 500 mA — appropriate for powering
four-wire smoke detectors (see notes).
• Power-limited circuitry.

CABINET DIMENSIONS
Door: 15.342” (38.97 cm) high x 14.667” (37.28 cm) wide x
0.375” (0.95 cm) deep.
Backbox: 15.0” (38.10 cm) high x 14.5” (36.83 cm) wide x 3.0”
(7.62 cm) deep.