Home > IP & GSM Alarm Communicators > IP Communicators >

  EnvisaLink 3 IP Communicator Security Interface Module
EnvisaLink 3 IP Communicator Security Interface Module


 
Our Price: $99.00
Sale Price: $89.00
You save $10.00!

Availability: Usually Ships in 24 Hours
Product Code: Z-EVL-3
Qty:

Description
 

EnvisaLink 3 IP Communicator Security Interface Module

The Envisalink 3 is a TCP/IP interface module from Eyez On that allows you to view the status of your alarm system remotely using a browser portal or a smartphone application. You wire this unit into the keybus of your DSC or Honeywell wired alarm system and it provides remote viewing and control of your alarm system. You can also set an unlimited amount of email or SMS addresses so that you may receive notifications on alarms, arms, disarms, trouble conditions, etc.

The Envisalink 3 performs self-maintenance and if it is hooked to a broadband "always-on" connection it will receive updates anytime they are available. The wiring and installation of the unit are simple and easy and no programming changes are needed for operation through a DSC panel. There are some programming setup steps for the Honeywell Vista Series though, but Eyez On provides these steps for you and an explanation of what each programming setup step does.

There is no annual fee associated with the Envisalink 3 and you can register it yourself on Eyez On's site which makes this add-on one of our new favorites.

Click HERE to view the installation sheet

Specifications:

  • Power Draw: 65 mA
  • Connectors: RJ45, 4-Terminal Screwdown
  • Dimensions: 10.5 cm (4-3/16") x 4.2 cm (1-11/16")
Included In The Box
  • EnvisaLink 3 Module
  • Mounting Stand-offs
  • Installation Guide
Panel Compatibility
  • DSC PowerSeries (1555, 1555 MX, 1575, 5010 (832), 5020 (864), 1616, 1832, 1864)
  • Honeywell Vista Panels (Vista20P, 21P, 15P, and 10P)
Envisalink 3 Review - Alarm System Store
Features
  • **New** Remotely upgradable to allow for new features and services

  • **New** EnvisaLink TPI - programmer's and integration interface.
  • **New** EnvisaLink Expansion Header - add new hardware modules as they become available.
  • Simple to hook-up
  • Built-in basic web server and html user-interface
  • 128-bit encryption
  • Real-time zone status with "time-since-tripped " feature
  • Local Arm/Disarm/Zone Bypass/PGM Control
  • Multi-Partition Support
  • Remote Arm (Away & Stay, Quick Arming)/Disarm/Zone Bypass/PGM Control (depending on panel model)
  • Event Logging
  • Receive Alerts by e-mail or SMS.
  • See at a glance system status on a map in ESP interface.
  • New "Smart Phone" optimized version of the ESP portal. Works with iPhone, Android, and Blackberry.


Average Customer Review: 5 of 5 | Total Reviews: 2 Write a review.


  0 of 0 people found the following review helpful:
 
Too Easy March 4, 2014
Reviewer: David G. from Middleburg, FL United States  
I have to echo most everyone’s sentiment on how easy the EnvisaLink  3 module is to install and configure.  I installed the module on a DSC PC1864 mounted in the cabinet that came with the DSC Kit 64-219SE Power 1864 Alarm System Kit which had holes pre-drilled that matched the holes on the module.  It took me longer to run the CAT 6 cable from my router to the alarm panel than it did to mount and configured the module.  I am using one zone to monitor the position of the garage overhead door.  I have it configured as a 24-Hr Non-Alarm (option 26) so it will not create an alarm condition when opened.  It simply allows me to check to see if I forgot to put the door down.  I am using three program outputs to enable closing and opening the door remotely.  All in all I would say this is an exceptional value for the functions it can perform.  The device is amazingly simple to install and configure.  It is also very easy to use remotely from a smart phone (BlackBerry Torch in my case).

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Envisalink install was quick and easy. February 22, 2014
Reviewer: John K. from Bradenton, FL United States  
I ordered the EVL3 on Mon AM and had it in my hands on Thurs PM via US Mail.
While waiting, I ran the required Ethernet  cable from my router to DSC PC1575 alarm box. I wish that a drill template was available online so that I could have pre-drilled the three .187" diameter holes in my alarm box.  The holes hold plastic pins that come with the EVL3.  Once the pins are installed in the alarm box, the EVL3 slips on them for a neat install.
Once the EVL3 arrived, I was "on the air" in about a half hour.  Most of that time was spent drilling the 3 holes.
Wiring instructions that came with the EVL3 were very brief.  I had wired to the DSC keybus before, so I knew where the wires needed to go.  I suspect that a novice might be somewhat intimidated by the placement of those 4 wires (red,black,yellow,green).
Bottom line is that the product works as advertised, and delivery was quick. I'm now receiving text & email from the EVL3. Status and control are available via my internet devices.

Was this review helpful to you?


Browse for more products in the same category as this item:

IP & GSM Alarm Communicators > IP Communicators
DSC Alarm Systems > DSC Accessories & Expansion Modules
DSC Expansion Modules
Live Support